I have got a Airport Extreme Basestation and an 3 x Airport Express Base station.

Hi
I have a netgear modem. Would like help with how to create one network with strong wireless signal all around the house and the gym outside. I basically know how I will setup the Airport Extreme and One Express ( for streaming music from Itunes ). How to use the other two Expresses to extend the wireless side of the network to have a strong signal all around the residental area.
Please help

Not knowing your exact building floorplan, I would start with the following basic setup of your AirPorts:
Connect the 802.11n AirPort Extreme Base Station (AEBSn) to the Netgear router by Ethernet.
Reconfigure the AEBSn as a bridge.
Configure the AEBSn for the option "Allow this network to be extended" enabled.
Configure each of the 802.11n AirPort Express Base Stations (AXn) with the option "Wireless Mode = Extend a wireless network" enabled.
Both AXns will be connected back to the AEBSn by wireless.

Similar Messages

  • Can airport extreme connect using a mac mini.  the base station is not recognized so i cannot configure it manually

    can airport extreme connect using a mac mini.  this airport extreme wont connect to internet via my cable modem.  I cant set it to bridge mode because it doesnt appear as a base station in airport utitlity...help

    First, is your AirPort Extreme Base Station (AEBS) a 802.11n, 802.11g, or 802.11b model? Second, what is your primary goal for using this base station? Finally, is the AEBS the only router in your current network configuration?

  • Airport Extreme n and airport express ...  No security ???

    I have a new Airport Extreme N and two of the Airport Express ones, both using the 6.3 firmware. I can configure everything okay, all airports can be found and connected together.
    My problem is that the network is open and anyone can join it ... The Extreme is configured to use WPA2 Personal but neither of the express ones are shown as using any encryption ... If I try to encrypt either of them they dissappear and I can't play my music remotely or find them in the utility.
    I've tried the post that suggests removing the encryption on the extreme and then enabling the express, before finally enabling the extreme again. it didn't work ...
    Any ideas what I'm doing so wrong ???

    Right ... went to the Genius Bar who kind of pointed me in the right direction ... They told me however to use the old setup software ... This works fine with the express but not the extreme ... So basically use the new software.
    My problem was cause by choosing the wrong option when setting up I started off aright by wetting up the extreme first with encrption enabled I was adding my express to the existing network but then choosing the next option that mentions Airtunes when I should have choosen the 'extend my network' option. This still allows you to use Airtune but doesn't say that ... The wizard then asks you to point to the base station and put in the password and then poblem solved ....... thanks for all you help ... and hope this helps someone else ..
    Macbook Pro   Mac OS X (10.4.8)  

  • I have FIOS and the latest version of the Airport Extreme Basestation set up in bridge mode.

    OK need some technical answers I have FIOS and am forced to use their Router. I have WiFi turned off on the FIOS router and my New version Airport Exteme Basestation set up in Bridge Mode. I have CAD 5 running to all my Mac computers and a CAD 5 up to the second floor. I have an older version Airport Extreme Basestation that I would like to connect to the CAD 5 cable on the second floor where the WiFi signal is weak as the main Airport is in the basement. How would I connect the second Airport to the Airport that is in Bridge Mode?  Will this setup mess up my signal strength on either CAD 5 or WiFi? I will also have one Macbook Pro plugged into the upstairs Airport. This is mainly for the WiFi for my iPad and iPhone. Details will help. Thanks.

    How would I connect the second Airport to the Airport that is in Bridge Mode?
    Connect from a LAN <-> port on the Bridge Mode AirPort to the WAN "O" port on the second floor AirPort and then use AirPort Utility on a Mac or iPad to set things up.
    Will this setup mess up my signal strength on either CAD 5 or WiFi?
    Nothing will be messed up, and you will have a much stronger WiFi signal upstairs.
    If you need more details on setup.....we need to know.....
    1) What model number of AirPort Extreme will be upstairs.  The model number is usually embedded in the foam base on the bottom of the device. Starts with an "A" followed by four numbers. Example.....A1143.
    2) What operating system you are using on your Mac, or whether you want to use the iPad for the setup...assuming that the upstairs AirPort is compatible.

  • MSN webtv and airport extreme basestation issue?

    Hello, My mother has an airport extreme M8930LL/A hooked up to a comcast highspeed internet modem by the wan port and a msn-webtv box hooked to the base station by the lan port. The problem(I know msn;)) is that when she uses the webtv is that webtv sometimes flashes off and on as if the webtv box is powering on off, but it seems more like the signal coming through the ethernet connection from the airport extreme basestation is powering on off. It also appears to be in sync with one of the lights flashing on the basestation. I forget which light as I have been sidetracked from this for a few weeks now and have just been able to get back to it. Any help would greatly be appreciated.
    Thank you,
    Message was edited by: electriczipper

    Hi, It appears that it is a comcast thing and nothing to do with airport or msn webtv. Still trying for a permanent solution as comcast came out and replaced a connection that resolved it temporarily.

  • HT3546 So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou! :)

    So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou!

    Welcome!
    Last question first, as we need to know what operating system that the Mac is using.
    If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac, and post back with the OS X Version number that you see there.
    Two possible solutions on the power cord
    ORIGINAL OEM APPLE AIRPORT EXTREME BASE STATION POWER SUPPLY AC ADAPTER A1202 if you want a white power supply and white power cord to match up with the Apple device
    AC adapter for Apple AirPort A1034 Extreme B... if you don't care what color the supply and cord might be
    If you don't already have a Setup Guide.....look here:
    AirPort Extreme Base Station Setup Guide v4.2 (Manual)

  • PC Used to work with XP and airport Extreme Basestation but not with Vista

    Please help, my PC Used to work with XP and airport Extreme Basestation but not now with Vista. I have a MacBook Pro connected and also a Mac Pro connected to the network on it and they still work, i have put the latest software on the PC and the firmware is up to date. The only thing i can see on the network on the PC is the basestation Hard Disk (shared also to the Macs) but i cannot connect with the password, i have tried everything in my knowledge, including formatting the machine and reinsatlling OS and changing security setting to no avail. Any ideas anyone?

    With regard to your printer problem - take a look at this discussion:
    http://discussions.apple.com/thread.jspa?messageID=6312413&tstart=0

  • My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

    My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

    My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

  • If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and

    If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops
    Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and time capsule upstairs to get complete coverage

    In theory, yes. If you configure the two base station into either an extended or roaming network configuration, you should be able to walk a laptop between routers and the laptop should attempt to connect/reconnect to the base station providing the stronger signal ... but, in reality, this is not always 100% true.

  • I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired.  Is this possible and how to I get them to work together?

    I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired.  Is this possible and how to I get them to work together?
    How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
    Frank

    Thanks for the info, this really helps.
    Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
    It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
    Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on  AirPort Extreme.
    The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
    AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
    Enter a device name that you want to use for the Extreme and click Next
    Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
    You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup.

  • I have an old Airport Extreme that I want to password protect. I being told that Airport Utility 5.6 is needed to manage the base station. When I download it and try to install that utility I told that it is not compatible with OS X 10.7.4

    I have an old Airport Extreme that I want to password protect. I being told that Airport Utility 5.6 is needed to manage the base station. When I download it and try to install that utility I told that it is not compatible with OS X 10.7.4

    The odds are that you downloaded AirPort Utility 5.6.1.....which will only work with Leopard and Snow Leopard Macs.
    Since your post indicates that you are using Lion 10.7.4, you need the correct utility for Lion. The link is below:
    AirPort Utility 5.6 for Mac OS X Lion

  • I have an airport extreme 2013.  Why does my airport utility sometimes display IP addresses and other times the names of the devices?  I want it to always display the device names.

    I have an airport extreme 2013. Why does my airport utility sometimes display IP addresses and other times the names of the devices? I want it to always display the device names.

    The utility has had less and less useful information .. it might be time to simply find a different utility.
    Fing network scanner. iphone and ipad.
    https://itunes.apple.com/au/app/fing-network-scanner/id430921107?mt=8
    This is very popular.. I do not know of what works well on Mac OS because i have installed 5.6 utility which of course has far more info than the later toy version. Plus using an Asus router which has excellent listing of all the clients.
    Sometimes beating yourself up to make apple routers do what you want is easier solved with lateral thinking.

  • Can't Connect to Internet using AirPort Extreme Card and DLink Router

    I have tried just about everything, but I can't seem to connect my MAC OS X 10.3.9 to the internet. I am using the Airport Extreme Card and no networks show up. I am trying to connect to my DLink router. I was told by DLink that it is compatible with AirPort Extreme cards, but the guys at Best Buy were unable to connect to their wireless routers, other than their Mac Router. Please let me know if you have a solution! Thanks

    dannabee, Welcome to the discussion area!
    What Mac do you have?
    Do you have iMac G5 or a Power Mac G5?
    Did you install the AirPort Extreme card yourself?

  • If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

    If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

    No, and that shouldn't be done with an AirPort Extreme or Time Capsule.
    (66017)

  • I have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. unility says it has found a new base station

    i have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. utility says it has found a new base station and asks if i want to use it. if i click yes, then the old setup is disabled.

    Ok, thanks for clarifying which models you have. Please see the following Apple Support article on how to configure these older base stations for a Wireless Distribution System (WDS).

Maybe you are looking for