I have got big problem. i have iphone 4 for a few day (it was new and packed) and now i realised that the screen during the conversation doen't block and turn up black. please help me, i don't knwo what to do!
I've got big problem. i have iphone 4 for a few day (it was new and packed) and now i realised that the screen during the conversation don't block and turn up black. please help me, i don't knwo what to do!
Connect to the Computer you Usually Sync with and Follow the Steps Here...
Recovery Mode
http://support.apple.com/kb/HT1808
Similar Messages
-
Hello community I have a big problem with my iphone 4s as precent problem with wifi and ios7. my phone was a champ when actualize this, eh degrade searched everything but I can not because I get the error 3194. I want a solution please
This support document http://support.apple.com/kb/ts4451 relates to the 3194 error. Generally this error has to do with trying to install an iOS that is not the most current. Maybe you tried to jailbreak the phone, or downgrade iOS? Any of this apply to you?
-
My question...
any answers pl.
I have a big problem with my Iphone 4...the pics and videos that i capture, often shows as inverted or orientted by 90/180/270 degrees. photos, one can rotate, but how about videos... is there any way i'm going wrong? this wasn't happening earlierIf I've understood you correctly then the ALLEXCEPT function may be what you're after and it could be applied in a similar way to the following...
=
RANKX(
ALL(Table1),
CALCULATE(
COUNTROWS(table1),
ALLEXCEPT(Table1, Table1[ContactReason])
DENSE
If this has missed the mark, would it be possible to clarify the requirement further?
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com
Blog: http://www.nimblelearn.com/blog
Twitter: @nimblelearn -
I HAVE A BIG PROBLEM I HAVE NOT BEEN ABLE TO RECOVER THE ANSWERS OF SECURITY SINCE THE MAIL THAT APPEARS TO DO THIS MEAN I NEED TO CHANGE THE OTHER SHOULD I DO FOR THE TRUTH WILL MAKE A PURCHASE AND ME THE REQUESTS, AS IS A NEW PHONE EXPECT AN ANSWER PROMPT AND POSITIVE
so I get looks but that is not my email recovery can help you reset your security information by sending a message to your email recovery: j ••••• @ mail.comYou need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(111384) -
HT4623 I have a big problem with my IPhone 4 since I've updated to IOS 6.0.1.
I've got a problem with my IPhone 4 since I've updated to IOS 6.0.1. After the call I'd like to end the call but the picture on the screen becomes magnified
so that you cannot see anything and the screen is not reacting. I need to restart the phone. But 7 or 8 times daily to restart the phone is not really convenient.
Has got anybody the same problem? How can I go back to IOS 5 ? Before the update I was a happy user of IPhone.
Thanks for help.Downgrading your ios is unsupported by apple. Go to settings, general, accesibility, zoom off..?
-
got big problem with my iphone4 , its not charging as it did before i updated (5.0.1) Now its charging very slowly and it doesnt show the charging sign on screen..
How do you know its charging very very slowly? Is the screen back on?
Once a month you should charge your phone to 100% then drain it, then charge it back up to 100%.
Just leave the phone in and do what is said above.
How long do you think it will take to charge to 100%? -
I recently updated my itunes and for a few days it worked fine. Now when I click on my desktop icon for itunes I'm getting a message box that says "The file "itunes library .itl" cannot be read because it was created by a newer version of itunes. Any help on how to open my itunes?
Tell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
dlrobinson49 wrote:
I guess I must have had a newer version ofiTunes on my defunt eMac....
That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first. -
Hello
My iphone 4S switches off after showing horizontal lines on the screen cutting through the apple logo during the restore process and then right after my iTunes shows the error 9 message, this happened 2 days ago when my phone just switched off unexpectedily and has been in this recovery mode since then. i have watched videos on Youtube and i have disabled Firewall before starting the process, i think i have done almost everything. please help anyone what do i do from here?
Just for interest sake i watched this video on youtube where this guy had the same problem but the difference is that he had it on an iPad. he opened the ipad up and did something on the ipad, it took less than a minute then his ipad worked.
I would appreciate it if someone would respond to this as fast as they can i am so stressed.
Regards
LwandoRead here:
http://support.apple.com/kb/ts3694#9
Error 9 is usually a security software issue. -
My MacBook pro is about 3 yrs old. It is a 2008 model right before the new design came out. Recently I closed it up which puts it to sleep and a couple minutes later when I opened it up the screen stayed blank but could hear the fan running but then the power clicked like it was shutting down and I could hear nothing more. My power supply is working and I have already tried resetting it. Can anyone help me? I don't live exactly near a Mac store to get help.
Before resorting to an LB change-out, try this, as it has fixed many of the "silver-key" Macbook Pros with wake-from-sleep issues:
1) To get the computer running, do an SMC reset. Instructions here:
http://support.apple.com/kb/HT3964
Your MBP model uses the first option under the subhead, "Resetting the System Management Controller (SMC)"
2) If you get it running, go to System Preferences > Network and select your Airport connection
3) In the result main pane, click the "Advanced..." button.
4) You should be looking at a window with multiple tabs at the top; the "Airport" tab (far left) should be active---if not, make it so.
5) There is a panel showing "Prefered Networks." Use the "minus" button below that window to eliminate any networks that you don't need to access on more than a weekly basis. I'm down to two: the home Airport Extreme Base Station and the network for a museum at which I volunteer once a week.
5) Click "OK" and close System Preferences.
Now try letting it sleep and see it if wakes up.
When this happened to my Late 2007 MBP, I used Console to read system.log and found that, on waking, the compuer was looking for the wireless network at a lodge where I'd stayed weeks earlier and miles away. Clear the morass of old networks and keeping the list short has completely cured my wake-from-sleep issues.
The steps I listed take less time to do than to read, and are within the ability even of novice Mac users.
If that doesn't work, you may need to seek professional help. If you take it to an Apple Store and they recommend a logic board replacement, ask about a "Depot Repair." Instead of replacing the logic board on-site (which will whack you to the tune of US$700-1100), they send the computer to a central Apple refurb facility that fixes whatever they find wrong for a flat fee of about US$315 (last time someone reported using the service here). Turnaround is about one working week, and people who have taken of this service have reported being very pleased with the outcome.
You don't show a geographic location. This service may not be available if you are outside North America. -
Please Help! I don't understand what's going on.
I'm almost at the end of my 30 day trial of lightroom. I like the program very much but there's one behavior that has me baffled. Lightroom doesn't always sync folders properly to reflect a RAW file that I've converted to TIFF or jpeg and saved to the same folder that the file originally resided in.
one example.
I opened a NEF file that I shot with the Nikkor 10.5mm fisheye lens in Nikon Capture to convert to a convertional (unfisheye) wide angle look. I save the file to the original folder as a 16 bit tiff. When I select the folder in Lightroom that I saved the tiff file to and do synchronize folder, the synchronize folder dialog box states that there are NO photos to add. I check the folder in the finder and the tiff file is there.
I try the exact procedure again and this time the sync folder dialog box says that is one file to import and the file is properly imported into the Lightroom database and the file shows up in the Lighroom folder.
Have other people had this experience.?
Thanks in advance
John Blake
Lightroom 1.1 Mac OS 10.4.10 Dual GH G4 with 1.5GB of RAMtomrock
Saving the file and changing the file name did the trick. Lightroom Properly synchronized the folder and the new file is in the database.
Thank you!
I guess Lightroom sees two files as being the same file if the only difference is the file's extension. I will have to save the derivative files in a different folder in order to be imported into Lightroom's database.
I'm going to start a new thread about this
John -
there are heat came from my right back side from my device and i think that make my battery died faster than i think it stay just for 3 hours and after that it became empty
please anybody respond to my proposal quickly ..... pleaseWhen in use and or charging an iPhone will get warm that is normqal
Too hot to touch is not normal .I would take it to an Apple Store genius bar ,in case the battery has become unstable
Maybe not charge unless you are present -
I may have a problem with my iphone however a few days ago
i took my phone in over networking issues as it was a locked phone to my network the couldn't help me but now i have an issue with the hardware i am worried they'd the iv done something to it to get it replaced this is not the case but i need to have them check it out will they think iv done something or will they just help me as they should ?
No. You must be the genius as we are not telepathic here. You could have taken it to an authorized service provider, Apple, or some other "phone shop", or your carrier for service. That's why I asked.
Now, grow up; learn to write; and ask a logical, sensible question, instead of the run-on unitelligible childish dribble you are posting here. Otherwise, go back to "them" for help. -
Pretty much what the title says. How do I get my old photo stream onto my new computer?
Hi nevobac,
Here is an article that explains how to transfer your pictures to a computer:
iOS: Importing personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/ht4083
Take care,
- Ari -
I need help please!!!!
Not quite sure what you mean...
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
iPhone User Guide -
Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks
As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.
Maybe you are looking for
-
In earlier versions of Firefox, I was able to open a document e.g. an email attachment or a document following a link in a website, and then decide if I wanted to save it or just read it. Now more often than not, it automatically saves it to Download
-
Out of nowhere, I received the following error when trying to launch Captivate 3: "The application failed to initialize properly (0xc00000006). Click on OK to terminate the application." This never happened with Cap 2 and has not happened during the
-
F.03_Financial accounting comparative analysis
Hi, Can some one please help me how to test transaction code F.03 I have Authorization to post any transaction; itu2019s a test Client for BPT automation. Please tell the steps/postings need to simulate the differences & make me understand the concep
-
Help-can't see (canvas) item in viewer
Hi I'm trying to position an 8 point garbage matte by use of the canvas, but can't see the positions because I can't see the item in the viewer while I am on the controls page in the canvas please excude dumb qstn, what am I doing wrong, how can i ge
-
Selecting from Combobox with only one item
I'm populating Comboboxes based on selections from other comboboxes. I pick up the selection with the 'change' trigger, however when you select the top item or if there is only one item, the change route doesn't work. So I tried to use the 'click' an