I HAVE GOT ITUNES TO WORK PLEASE READ

i am on windows xp and aol gold.i also have panda antivirus i could not connect to music store i check panda and firewall was turned on, i turned it off and itunes connected straight away. try this hopefully it will work for you

got sorted

Similar Messages

How I Got iTunes to Work After the Latest (So-Called) Update

Does anyone at (cr)Apple test updates before releasing them?!! My iTunes, as I see has happened with many, MANY others, would not open after downloading the latest update. Here's what I did to fix this issue:
1. Go into Windows Control Panel, click on "Programs and Features", and find both Apple Application Support & Apple Mobile Device Support. Uninstall both of them (in my case, both applications were listed twice, with two different version numbers. Ihad to uninstall the newer one first, before I could uninstall the older version).
2. Download the correct version of iTunes for your operating system (32-bit for 32-bit versions of Windows; 64-bit for 64-bit versions of Windows), and SAVE it (NOT run!) somewhere, like your desktop.
3. Once downloaded, right-click on the file and use a program like 7-Zip to extract the files somewhere you'll be able to locate them (in my case, "ITunes64SetUp").
4. Go into the folder and find the follwing two files or programs: "AppleApplicationSupport.msi" and "AppleMobileDeviceSupport64.msi" (or, I'm assuming if your system is 32-bit Windows, that last one would be called "AppleMobileDeviceSupport32.msi" or maybe just "AppleMobileDEviceSupport.msi).
5. Double-click each one and that will launch the install programs. Follow the prompts and install both.
6. After that, your iTunes should work correctly. Mine did!
Good luck!
This is ridiculous that we have to do this - the average computer user would have NO idea how to fix this!

Quit iTunes.
Copy the iTunes Folder to the D drive, leave a copy on the C drive.
Then open the XML file in the C drive in the iTunes folder with a Text editor with "Find and Replace" ability.
Correct all the partial pathnames so it matches the new location where the iTunes Folder is now.
Example:
Find: C:\Windows\Users\Johnny\Music\iTunesFolder... to
Replace: D\\Music\iTunesFolder....
Quit iTunes and transfer all the folders out of the iTunes Folder on C except the two single files, including the XML you edited.
Start iTunes and click on one song you have but dislike, if it plays your fine. Leave the C/iTunes folders alone to make sure it works for all your content, then finally back it up or delete it to make room on C. Do a Windows defrag on C for increased performance.
If you get a Explanation Point in iTunes, it didn't find the file and you didn't correct the pathnames correctly..

ITunes Match subscribers - please read this

I just sent an enhancement request to Apple regarding the lack of a feature to clearly show which music is has been downloaded and saved to an iOS device, please read the request I sent and consider sending yours to Apple also:
Hi, for those of us who are iTunes Match sibscribers and who don't have all-you-can-eat data plans on our iOS devices, the best option is to download the music we plan on listening to while we're on the move before we leave home.
At the moment there is no easy way to find music downloaded to an iOS device from iTunes Match.
Please either add a field within the iOS Music app titled 'downloaded from iTunes Match' or simply, 'iTunes Match', which could be selected alongside 'Songs', 'Compilations', 'Genres' etc, or add a field to Smart Playlists in iTunes which would also allow you to see which songs have been downloaded from iTunes Match and are available to play without a network connection.
You can submit an enhancement request here: http://www.apple.com/feedback/itunesapp.html

On the iOS device go to Settings > Music and set "show all music" to OFF (not green).

Fcp to color how you have got color to work

Hi Guys I am having problems in getting the work flow with color to work and keep asking question on how to fix it , so i am thinking is there any body who would like to share how they got color to work and what setting you use, what formats ect. so we could get a list of working mac that every body can see. so please if you are up and running and your wrok flow works please tell me and all the other just how you have done it
Thanks

Hi Trevor,
welcome here!
Maybe your message tells us more about some frustrations you have been experiencing rather than the actual technical glithces you have encountered.
Therefore, I start with a very symple reply.
When I need Color to grade my video (usually DVCPRO HD) I simply go to file>send to>Color.
I colour grade, render and send it back to FCP.
Never had problems with that.
To use Color you may need (recommendable) dual core intel processor or higher, 4GB RAM or higher, X1900 graphics card, High Def. external monitor. An external or internal drive capable to let you edit on the fly.
I noticed that you are using Leopard.
Issues related to the new OS with FCPstudio2 are quite common and we are all taking notice of it.
Leopard was not specifically designed for FCP users so those and other issues were more or less predictable.
Hope this helps!
Gig

ITunes for Vista: Please Read!

Hello there! Recently I got my very first iPod, and I've spent the past week or so trying to get iTunes to run on my system. Here is it's specs:
Windows Vista Home Premium
Service Pack 1
Model: a6060a
Processor: Intel(R) Core(TM)2 CPU
Memory (RAM): 3.00 GB
System Type: 32-bit Operating System.
If any other information is required, please ask.
So after discovering iTunes, I downloaded it straight from the Apple site. It also came with Quicktime. I double-clicked on the .exe file to install it, and all appeared successful. I restarted my computer to find that iTunes would not open. A message appeared saying: "iTunes has stopped working." It then attempts to find a 'solution'. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
At the bottom of the message is a 'Close Program' button. I pressed this, and from the taskbar another message popped up saying: "iTunes was closed. To help protect your computer, Data Execution Prevention has closed iTunes. Click to learn more."
I uninstalled iTunes, restarted my computer, then reinstalled it from the same .exe that I downloaded from Apple. Same outcome. I tried once again, but this time deleting any leftover files or folders from the start menu. I went to Program Files and System32 to see if any items related to iTunes or Quicktime were there. I also deleted the temp files. Same outcome, again.
I opened the Run feature by holding down the Windows button and R on the keyboard. I typed in msconfig and System Configuration opened. I went to the Services and Startup tabs, and disabled all programs there except:
Apple Mobile Device
Bonjour Service
iPod Service
Quicktime
iTunes
All of these programs belong to Apple. After restarting my computer, I found that iTunes still wouldn't open. I know that there is also a program called iTunesHelper or something like that. It wasn't in the list at the time I tried this.
I then left iTunes on my computer, but deleted all traces of Quicktime. I also uninstalled a program called the Ace Mega Codecs Pack. Apparently it has been known to upset Quicktime and iTunes a lot. I downloaded the latest standalone version of Quicktime, installed it and then rebooted. Quicktime now runs perfectly after uninstalling the Codec pack, but iTunes still refuses to open. I do not know whether I have any other Codec packs on my system. I don't think so.
I tried disabling my Norton Antivirus/Protection Center entirely. I don't know how to use it, to be honest, but there didn't seem to be a list of blocked programs there. Although Norton was off, iTunes still would not open.
As a last attempt, I tried turning off System Restore. I can't remember where I read this, but for someone it worked. After finding that iTunes still would not open, I gave up.
So now I've tried just about everything I can think of and find on the internet. It's hopeless, and I know that many, many other people have this issue. When I connect my iPod to the computer, it attempts to open iTunes. However the same error appears. Please could somebody help me? I'm stuck.
Thank you so very much!

Go through these articles for troubleshooting vista:
http://support.apple.com/kb/HT2292 Using MSCONFIG to troubleshoot conflicts in Vista
http://support.apple.com/kb/TS1717 Troubleshooting Vista
http://support.apple.com/kb/TA23565 Background processes
http://support.apple.com/kb/TS1567 Apple Mobile Device Service
http://support.apple.com/kb/HT1923 Uninstall iTunes, QuickTime, and other essential software components from your Windows Vista PC
http://support.apple.com/kb/HT1926 Trouble installing itunes
I know, it's a lot to read, but maybe you missed something
Good luck

Flash player says its installed but is not working- please read

Hey everyone!
the past few days I have easily spent several hours working with my flash player. First- it was saying I needed to put in the latest version, so I did, it said it worked but when I tried to watch videos or play a game etc I got an error message saying I needed flash player 11. and I went through that process countless times. I restarted my computer, ran my virus software, etc. when none of that worked I just disabled and trashed ALL of the software I had downloaded since I had had the problem including my current flash player and adobe. Just now, I tried to install the flash player again. It seemed to work great- it said it installed and I clicked finnish... but, behold, I go to watch a video for school and I have the same problem. I tried to change the computer type to the otehr windows 7 option for the download, again it seemed to work fine and downloaded and told me it was finished... but I still can't view my video or do any games etc online. I have worked with the IT department at school and with family... no one can figure it out. it should be working as far as we are all concerned...but it is not and I have school work to do.
If someone could please help me I would much appriciate it! if this is a glitch with some adobe thing- PLEASE fix it asap. I have work to do!
Thanks!
Maggie

What web browser do you use? If IE, check
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

Cannot get itunes to work please help

When I double clik on ITunes it takes ages to start then when i plug my ipod or shuffle in the window opens showing the drive ie. E:\ for my shuffle and i get the following message in itunes " The software required for communicating with the Ipod s not installed correctly. Please re-install ITunes to re-installthe Ipods software"
I have uninstalled and re-installed, clean out the registry tried selective startup.
Been without itunes for over a week now any help would be much appreciated.
I also installed Itunes on my works laptop and this operates fine and sees the ipods, all be it without my library.

this is what i get when i run diagnostics in itunes with shuffle connected
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gericom Ego
iTunes 7.7.0.43
QuickTime 7.5
CD Driver 2.0.7.3
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.0.0.33
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number 00C44CCC186A10D9
Current user is an administrator.
The current local date and time is 2008-07-30 10:56:04.
iTunes is not running in safe mode.
Video Display Information
ATI MOBILITY RADEON 9700
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 7.7.0.43 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 2.0.28.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 . Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 . Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 . Device is working properly.
Intel(R) 82801DB/DBM USB2 Enhanced Host Controller - 24CD . Device is working properly.
FireWire (IEEE 1394) Host Controllers:
OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod shuffle (2nd & 3rd Generation) running firmware version 1.0.4
Serial Number: 5E643ZULVTE

Data DVD from iTunes not working - please help

I burned a 4 GB playlist as a data DVD from iTunes 7.
I am trying to put the files on a PC running iTunes 7, and NOTHING is happening. The drive in the PC is DVD-rom and all other DVD's work fine.
What's the deal?

What is "Adding to library"?
Huh?
This is how you get songs into iTunes.
Open iTunes.
Inset the DVD.
Go to File -> Add File (or folder) to iTunes and select the files/folders on the DVD.
The DVD is not going to show up in iTunes because it is not an audio CD. It is a data DVD.
Do not try to Import the DVD because Import is used for audio CDs only.

Itunes wont work please help me

My itunes wont update because of the quicktime how can i fix it???

Usually when this happens either quicktime is not installed properly OR you have the Qoologic adware on the PC.
So first we will scan the system for adware. A good program for catching the Qoologic adware (Which affects iTUnes) is Ewido. You can download and install it here http://www.ewido.com Just scan the system and if it finds adware, have it remove it.

I can not get my iTunes to work, please help

ok when i click to open itunes, i get the window asking me whether or not I agree to the Itunes software license agreement. I click agree and then i get an error message stating that "The itunes application could not be opened. An unknown error occured [-48].
Can somebody please help me or if anyone even knows a number i could call for support regarding itunes, i would greatly appriciate that.
Thank you

Do you have a valid payment method entered in your account? If yes then contact iTunes.
Contact iTunes

HT1349 i have a itunes card and cant read the number after i scratched it off

< Serial Number Edited By Host >

iTunes Support: http://www.apple.com/support/itunes/
Perhaps Cards & Codes: http://www.apple.com/support/itunes/cards-codes/ ?
Specifically the article about Invalid, inactive, or illegible codes may hekp: http://support.apple.com/kb/TS1292
P.S. In the future, you might not want to post serial numbers in these public discussions.
I have asked the Hosts whether your S/N should be edited out.
Message was edited by: EZ Jim
Mac OSX 10.7.3

Can't get my godaddy caldav to synchronize with lightning. Can someone explain how they have got this to work?

all help is appreciated

I have. I access the the calendar settings in Go Daddy Workspace and go into the share calendar tab. From there I publish my calendar and have the URL sent to me via the email calendar function. I then create a new network calendar in lightning and use the URL as the location. Lighting creates the calendar and I see it in my left menu but I am unable to put a check into it. Is anyone else having this problem?

ITunes locked? please help! :(

when i go to open my iTunes it comes up with this error message!
The iTunes Music Library.itl file is locked, on a locked disk, or you do not have the write permission for this file.
Please help me, i sent my iPod nano away for it to be repaired and in that time got a new computer, i couldnt find my CD when i got my iPod back so i downloaded it from the internet, and it kept coming up with this message after i installed it, it worked once but then stopped and now i found the CD, i installed that and it still doesnt work PLease help me i realli need this fixed
Thanks xx

Thank you Thank you! i didnt think i would have got it to work, i just searched my computer to find my iTunes library, right clicked for properties and it was "read Only" thanks so much

Has anyone with an Intel Core Duo got lm_sensors to work?

I keep getting a message about no sensors being found. I've followed the wiki, but I just can't seem to get it to work for my Core Duo.
If you have got it to work, can you please let me know which modules sensors-detect told you to load?

I have it working on my new system.
I tried to just build the driver for beyond but it would not work so I found a patch and rebuilt the kernel. An updated patch has now been sent to iph for inclusion in -beyond.
I then built lm_sensors-svn from the AUR and low and behold:
[lm_sensors-svn]: sensors
w83627ehf-isa-0290
Adapter: ISA adapter
VCore: +1.34 V (min = +0.00 V, max = +1.74 V)
in1: +12.09 V (min = +13.46 V, max = +9.24 V) ALARM
AVCC: +3.23 V (min = +4.08 V, max = +3.82 V) ALARM
3VCC: +3.23 V (min = +4.08 V, max = +3.50 V) ALARM
in4: +1.63 V (min = +2.02 V, max = +1.53 V) ALARM
in5: +1.58 V (min = +2.04 V, max = +2.04 V) ALARM
in6: +5.07 V (min = +4.58 V, max = +6.48 V)
VSB: +3.22 V (min = +4.08 V, max = +4.08 V) ALARM
VBAT: +3.23 V (min = +4.08 V, max = +4.08 V) ALARM
in9: +1.62 V (min = +2.04 V, max = +2.04 V) ALARM
Case Fan: 0 RPM (min = 83 RPM, div = 128) ALARM
CPU Fan: 860 RPM (min = 883 RPM, div = 8) ALARM
Aux Fan: 0 RPM (min = 0 RPM, div = 128)
fan5: 0 RPM (min = 0 RPM, div = 8)
Sys Temp: +33°C (high = -69°C, hyst = -70°C) ALARM
CPU Temp: +44.0°C (high = +80.0°C, hyst = +75.0°C)
AUX Temp: +45.0°C (high = +80.0°C, hyst = +75.0°C)
coretemp-isa-0000
Adapter: ISA adapter
temp1: +42°C (high = +85°C)
coretemp-isa-0001
Adapter: ISA adapter
temp1: +43°C (high = +85°C)
So, yes, it works but it might a little while before all the support is available mainline.

ITunes stopped working,C++ library error, removed iTunes, now iTunes wont download

Have been using iTunes for years on laptop with windows vista (32 bit). recently started getting itunes errors such as C++ runtime library error and R6034 error. Itunes stopped working. Read the boards, I deleted itunes and other products from the trouble shooting directions (e.g., bonjour, mobile me etc), and tried to download itunes again. now itunes wont download (I have 20 MB/140MB available memory). stuck at this point - Itunes not on laptop, but cant download new itunes.....

Sorry for the delay. Tried running the fixit program (1 time via internet explorer, 1 time via firefox), the firefox attempt downloaded the fixit program, but when trying to run it I get a pop up window that indicates that the troubleshooter is not available and that the fixit program is invalid or has expired and a new website is given for the new program (same happened with the internet exploere attempt- it directed me to the same window and to the same website)......the website is:
http://support.microsoft.com/fixit/
there are several buttons to choose from and reviewed them- I found the uninstall fix that you described in the windows button. I tried to download and run the fix from both internet explorer and firefox, however after downloading, when i run the program I eventually get the same window that says that the troubleshooter is not available......

I HAVE GOT ITUNES TO WORK PLEASE READ

Similar Messages

Maybe you are looking for