I have had Aperture since 1.0 and bought every upgrade. Now I want to transfer the software to my new iMac but I have to enter the original Serial number that I cannot locate. Any ideas what i can do, please?

I have had Aperture since version 1.0 and bought every upgrade. Now I want to transfer the software to my new iMac but I have to enter the original Serial number that I cannot locate. Any ideas what I can do, please?

The original serial number should be in the box with the installer disk.
If you cannot locate the serial number, contact Apple for a replacement serial number. You will need to provide a proof of purchase.
See: Pro Application Replacement Serial Numbers
Regards
Léonie
P.S. The menu command "Aperture > About Aperture" will show you your Aperture 3 serial number on your old mac, but not the previous serial numbers.

Similar Messages

Hello I'm upgrading my iPhone 4S tmw to a iPhone 5c , I also have a iPad which I've used iCloud to get pics from phone to iPad, obviously if I delete my phone pics there gonna go from iPad too. Any idea what I can do please?

Hello I'm upgrading my iPhone 4S tmw to a iPhone 5c , I also have a iPad which I've used iCloud to get pics from phone to iPad, obviously if I delete my phone pics there gonna go from iPad too. Any idea what I can do please?

In addition to the very sound and useful information posted by Lawrence Finch, there is also a way to save the photos from the photo stream to the camera roll on the iPad so that even if the photo stream is turned off, the photos will remain on the iPad.
Launch the photos app and them open the Photo Stream album. Select every photo that you want to save by tapping on them, then tap in the action/sharing icon and select - Save to Camera Roll.
Having said that, the information that Lawrence shared with you is very important and the instructions in both articles are very useful. Make use of them.

TS1389 I've purchased an album through the itunes store and every track plays except one which continually asks me to authorise my computer. I've tried all the steps suggested above but still no joy. Anyone have any ideas what i can do next? Thanks Pa

I've purchased an album through the itunes store and every track plays except one which continually asks me to authorise my computer. I've tried all the steps suggested above but still no joy. Anyone have any ideas what i can do next? Thanks Paul

Sounds like you have a "damaged track" or "damaged file".
This worked for me today downloading Kendrick Lamar's new Album "good kid, m.A.A.d city".
My situation: I bought the album today for my Mac, MacBook Pro, iPad 2, and iPhone 4S devices.
Issue: One song (only on my MacBook Pro) would not play, instead display "
EX: left"
Solution: 1. Manually delete the song (giving you the error) permantly from the authorized computer.
2. Open iTunes, Click iTunes Store (left sidebar), and locate Quick Links and then click Purchased to proceed.
3. Click "Not On This Computer", find the song that wouldn't play, and re-download it again.
4. Check your Music Library for your song (Should download inside the associated album) and hit play.
EX: (Song I purchased that wouldn't play because of authorization, playing)
Enjoy!

My mac air is re-starting several times during the day, anyone have any idea what I can do to fixed it

My mac air is re-starting several times during the day, anyone have any idea what I can do to fixed it?

I was having this problem while still using Mavericks -- it started after a Mavericks update last spring. During the initial Yosemite beta runs over the summer, it seemed to be fixed, but after the official launch in October, I had all sorts of problems keeping connected. Its gotten a little better, but still happens to at least one of my devices every day. Weird that we still cannot figure out why the connection keeps dropping on some devices, but not others, and then the next day, one of the devices that didn't disconnect the previous day will disconnect, but the ones that did disconnect, stay connected. It's just sloppy, poorly written software for technology that isn't working the way it should. If you turn off Continuity and Handoff on all your devices, you will probably see that everything stays connected. With those turned off on all devices, TC stayed connected to everything for over a month. The day I turned Continuity back on, all the problems started again. It had something to do with the bluetooth version being used, the wifi routine, and Apple's AirPlay technology not quite getting along with each other.

I recently reset my phone and I have been asked to activate my iphone but I don't know either my email or password and I cannot get on to my phone any ideas what I can do

I recently reset my phone and I have been asked to activate my iphone but I don't know either my email or password and I cannot get on to my phone any ideas what I can do?

Hi Meganmay22,
Welcome to the Apple Support Communities!
It sounds like the iPhone is in a status called Activation Lock. Please use the following article for information on Activation Lock; it includes information on locating your Apple ID.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Have a great day,
Joe

I'm trying to sync a new i phone to i tunes. I get message that says cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?

I'm trying to sync a new iphone into i tunes. I'm getting a message that says that this iphone cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?

See Here...
AMDS for Windows
http://support.apple.com/kb/TS1567
AMDS for Mac
http://support.apple.com/kb/ht1747

HT4759 I just updated my iPad to the new ios and now it won't let me use iCloud. I have been in my settings and it says I need to agree to the new t&c's but when I click to do it my device freezes. Any Idea what I can do as I can't download new app either

I just updated my iPad to the new ios and now it won't let me use iCloud. I have been in my settings and it says I need to agree to the new t&c's but when I click to do it my device freezes. Any Idea what I can do as I can't download new app either

Sorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
Maybe it's time to buy yourself a new iPod Touch.

Hi my iPhone does not have reception. I have tried the sim in a different phone and it has reception. Any ideas what I can do

Hi my iPhone does not have reception. I have tried the sim in a different phone and it has reception. Any ideas what I can do

try these things
-reset your network by going setting> general>reset>reset network setting
-toggle airplane mode on and off
-then back up your information and then restore as new.
-still no service then if your within your limited warranty apple can replace it for nothing if not it is 199$ for replacement

Updated to Oct 2014 version of photoshop CC. since that time cannot save ANY work. I can work on files but when I hit 'save as" every time it says "photoshop has quit working and needs to close."

Updated to Oct 2014 version of photoshop CC. since that time cannot save ANY work. I can work on files but when I hit 'save as" every time it says "photoshop has quit working and needs to close." Need solution now.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I recently updated to IOS 5.1.1 and now my iPod touch won't sync music from my pc. It will sync apps though. Any ideas what I should do please?

I recently updated to IOS 5.1.1 and now my iPod touch won't sync music from my pc. It will sync apps though. Any ideas what I should do please?

- Have you tried a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- NextI would restore from backup.

I have an ipod touch 5th gen and when connected to itunes i get a message saying itunes was unable to load data class information from sync services. reconnect or try again later. anyone got any ideas? i've tried most things on most forums but still no jo

i have an ipod touch 5th gen and when connected to itunes i get a message saying itunes was unable to load data class information from sync services. reconnect or try again later. anyone got any ideas? i've tried most things on most forums but still no joy

Try here:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
If not successful see the previous discussion on the right side of this page with the green checkmark.

Hi! I've just installed mountain lion and I find one of the programs I need for my work is crashing all the time. any ideas what i can do?

hi! I've just installed mountain lion and I find one of the programs I need for my work is crashing all the time. any ideas what i can do?

Ah!
Factuur Bright x
part of errors:
Process:         Factuur Bright X [1476]
Path:            /Applications/Factuur Bright X/Factuur Bright X.app/Contents/MacOS/Factuur Bright X
Identifier:      ???
Version:         ??? (2.0.0b20)
Code Type:       X86 (Native)
Parent Process: launchd [184]
User ID:         501
Date/Time:       2013-07-10 22:35:39.180 +0200
OS Version:      Mac OS X 10.8.4 (12E55)
Report Version: 10
Interval Since Last Report:          2118 sec
Crashes Since Last Report:           1
Per-App Interval Since Last Report: 24 sec
Per-App Crashes Since Last Report:   1
Anonymous UUID:                      47D641A2-4625-7590-369C-8BAFE1439551
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000010

I am trying to open my Preview application to view a PDF. However nothing opens and an error message, "Error -1712" pops up. Any ideas what I can do to resolve this?

I am trying to open my Preview application to view a PDF. However nothing opens and an error message, "Error -1712" pops up. Any ideas what I can do to resolve this?

Restart. If an application won't quit and prevents restarting, select
 ▹ Force Quit...
from the menu bar, then select the frozen application from the list and press return. As a last resort, force a shutdown by holding down the power button for a few seconds. Then press it again briefly to start up. Test.

Hello I went to wipe my 1st generation iPad and then tried to update the iOS now the iPad won't work at all any ideas what I can do?

Hello I went to wipe my 1st generation iPad and then tried to update the iOS now the iPad won't work at all any ideas what I can do?

You can't update the original iPad beyond iOS 5.1.1 so if you were already running that version, there was no reason to wipe the iPad to try to update.
Won't work at all, doesn't tell me the whole story. Does it power up but not respond to anything? Does it not power up at all? Some detailed information in context would really be helpful.
IF the device will not start up, try a reset. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple Logo appears on the screen.

I purchased as a Download Lightroom 5.5, My pc got a virus. I saved Lightroom on ext. drive. I am trying to reload onto pc BUT it's asking me for a serial number..I cannot find receipt. Please help. I registered when I downloaded purchase.

I purchased as a Download Lightroom 5.5, My pc got a virus. I saved Lightroom on ext. drive. I am trying to reload onto pc BUT it's asking me for a serial number..I cannot find receipt. Please help. I registered when I downloaded purchase.

Find your serial number quickly
You might want to develop a more secure system of saving your serial numbers and other critical information.

I have had Aperture since 1.0 and bought every upgrade. Now I want to transfer the software to my new iMac but I have to enter the original Serial number that I cannot locate. Any ideas what i can do, please?

Similar Messages

Maybe you are looking for