I have hp 1018 laser printer and windows 7 ,all was working fine, suddenly it stop printing all PDFs
i have hp 1018 laser printer and windows 7 ,all was working fine, suddenly it stop printing all PDFs.i have adobe acrobat X pro installed and adobe X1 reader installed, i searched a lot, nothing i found when i send command to print a PDF it just do nothing , but rest of images or word doc and webpages are beings printed, can any one help me whats going on ?
well i have found that i needed to not just uninstall itunes, but also apple mobile device support, bonjour apple software update and apple application support - uninstall all these and then install itunes - that seesm to have fixed it, though now i am sync fail - that's a different matter perhaps
Similar Messages
-
Premiere Elements 11, Windows 8, Was Working Fine, Now 'Has Stopped Working'
I have just finished a project successfully, burned a BluRay with acceptable result, then shut down for the night. While viewing the BluRay, I saw a couple of glitches I wanted to fix, and the menu did not appear, so re-opened the project this morning. Thinking a stop marker would fix the menu not re-appearing, I inserted one at where I thought the end of my video was. I then found an unnecessary clip at the end that had slipped by me, making the end of the video longer, and likely the problem with the main menu not coming back. I deleted the clip. I rendered, saved, and played, but the playback wouldn't start. I closed and restarted about 5 times, same result. Now, Premiere Elements does not start at all, I get the splash screen, then the Windows box saying the program has stopped working and Windows will be in touch with me when they find a solution. Any ideas? I de-selected a sound device in Control Panel while the program was running, but have undone that action and the program will not start. I appreciate the help.
ATR, thanks for the quick response. I tried some of your suggestions (from another related issue) in troubleshooting this one.
Good info on the stop marker, I will remove it.
Long story short, I have managed to re-install the program and get it to start. After the third time, the combination seems to be to Remove my preferences, Remove downloaded content, and Deactivate Product. I was reluctant to do the deactivation checkbox, I downloaded the program and was concerned about being locked out, Adobe thinking this was another illegal install.
I started the program gently (giving things a long time to load, light on the hard drive being the main indicator) and was able to reload the video that seemed to cause the problem. Rendered, played, edited, no problems at this point.
As to what may have caused the trouble initially, I'm not sure. I have speakers run off the analog onboard sound, with a microphone connected. I also have a USB headset w/ microphone that I use for narration and latenight listening. These devices don't seem to know about each other, and changing their status in Control Panel does not translate to a current Elements session. In Elements preferences, I enabled the analog speakers. From there, things went downhill. The sound wouldn't play, then the play would not start the video in editor, then the program would not start at all.
I really like this program so far. I used Elements 1 and 2 way back when (with a computer to end all computers) to get all of our VHS recordings onto digital media. I did some editing and made some videos, then got away from it for a few years. We started diving and I got a GoPro camera. It didn't take too long to figure out the computer I had wouldn't do it for the new video formats. So, I now have the computer to end all computers to take care of the task. This has been the first glitch I've had in Elements 11. I expected a great deal more trouble with Windows 8.
Anyway, thanks again. If I find a recurring issue here, I will be sure to post it. -
HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures.
HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures. Using the printer completely unconnected from a pc or network, using a SSD memory card to print off. As the printer begins the print, the printer prints only about 3/4 of the image, and clips the rest leaving it blank. Within the options, you can see the whole picture on the LCD screen, and selecting the 4x6 print mode it still clips the picture.
Not sure exactly whats going on, the printer was doing this fine for about a year, and just randomly started to print with the image cut off at the beging and ending abruptly at the end only printing half-3/4's. Also using the same memory card, have not tried a different card though. Any ideas?As far as I know, you cannot scan or perform software-based copying over a Bluetooth connection. Printing is doable. Perhaps that is something that is in the pipe for developement.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
iTunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2 -
I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off
Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.
-
I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try. -
Hi there
I ha
Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.Shame you had the iPhone hacked as O2 usually unlock their customers iPhones happily.
We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
However hint ....you have probably trashed it -
I just got y ipad. It was working fine. suddenly I tried to use it and it wont turn on.
I just got my ipad. It was working fine. suddenly I tried to use it and it wont turn on. The battery is fine.
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. Happened to me once, about 6 months ago, and a reset got it working again.
-
My Mastercard was working effectively, suddenly it stopped !
it says my payment method is not accepted ! why
I have money in my card but still cann't use itIf it is a debit card, that may be your problem as Apple has
stopped accepting debit cards in many areas.
Click the link below to see current policy re accepted forms of payment:
http://support.apple.com/kb/HT5552 -
iCloud was working fine, suddenly when I try to sync I get this message "you can't use icloud when multiple versions of outlook are installed". I only have one version of outlook installed. Any suggestions?
Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186 -
So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke
Have not heard of that but here is what I would do - test after each step to see if the problem is solved
1. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
2. If that does not work - back up to iTunes and restore to factory settings
3. Check to see if the problem is resolved before restoring from backup -
I have wi-fi in my home and it has always worked fine with my iPad. Then I went to Ireland and used the iPad there. Since I have been home, it won't work in my house. I can't get my wi-fi connecton. I took it to anothe location where I have logged in in the past, and it worked perfectly. Any ideas as to why I can't get a connection at home?
Thank you.Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
PSE9 - problems with tags and Outlook. Was working fine Friday!
I had PSE8. Would no longer print or use Outook on Windows 7. Kept having to revert to a restore point. Purchased PSE9 and installed 2 days ago. Worked perfectly. Used my original keyword tags, printed and sent email via Outlook without a problem. Turned on the computer this moring and tried to send email and the program crashed and crashed and crashed. Also, now I have a bunch of boring keyword icons instead of the one I have chosen on all my photos. They are organized correctly but the icons are not the ones I chose which are listed in the organizer pane. There was some kind of Adobe update and this morning I had to go to a restore point in order to be able to email again. I have been having this issue for over a month now since I started using Windows 7. The only program I have had any problem with is PSE!!!!! After installing PSE9, I deleted PSE8 and things were still working fine 2 days ago. Am not happy and am sick of spending my precious time dealing with PSE on a daily basis.
I did assure that Outlook is set as my default email program before I posted this.
-
I Have a new wifi router and have set up my iPad / iPhone and wireless printer correctly to the new router but I can't print from the iPad and iPhone. It keeps saying ' no AirPrint printer found'. Help please!
Start with the most basic thing that you can try. Unplug the router from power for about 30 seconds, and restart the printer and the iPad and plug the router back into power.
-
I have windows 7 and all has been fine until 2 days ago when suddenly i turned on my laptop and i got some error message about some apple support program error - i didnt tkae notice of it only that i couldnt run itunes, so i uninstalled and reinstalled itunes and it now runs as normal, but now it wont recognise my ipad saying that 64bit version is not installed - WHAT RUBBISH IS THIS? i downloaded and installed the 64bit version from applie and yet the error persists - can some one please tell me how i can get itunes to recognise my ipad again - this seems like such a ridiculous error for these two apple products to be conflicting with each other - please help
well i have found that i needed to not just uninstall itunes, but also apple mobile device support, bonjour apple software update and apple application support - uninstall all these and then install itunes - that seesm to have fixed it, though now i am sync fail - that's a different matter perhaps
Maybe you are looking for
-
Need to Change Result in Transaction QA32
Hi all, Is it possible to change my Result value in transaction QA32 after save all data and post data. Means i can save my data but now i have to change my RESULT VALUE in QA32 so it's possible . And it's possible then please kindly describe me step
-
Need clarification on the Hyperion stuff
I have some clarification on the following question which i came in certification last 2 days back. A calcualtion is performed on a database for which create block on equation is off.The command SET CREATEBLOCKONEQ ON is issued immediately before an
-
HT1212 how do I disabled my iphone i have a message say iphone is disabled connet to itunes
what can I do to disabled my iphone
-
Why can't i update my iPod to iOS 5 it says can't connect to iTunes update server?
ios 5 is supposed to be released today but i keep getting the message saying cant connect to update server?
-
Need to upgrade R12.AD.B.delta.2 to R12.AD.B.delta.3.
Hi, Please tell me which patch or patches requried to upgrade the R12.AD.B.delta.2 to R12.AD.B.delta.3. and R12.AD.B.1 to R12.AD.B.2 and R12.AD.B.2 to R12.AD.B.3??? thanks