I have HP J3640 all in one. The printer is printing extremely slow

I have HP J3640 all in one. The printer is printing extremely slow.

Hi,
Please use the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01080660&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
I would check ink level first and reseat (not reset) the cartridges.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

I have a C4240 All-In-One printer and i am getting an error message Carriage Jam. i hardly use the

I have a C4240 All-in-One printer and am getting an error message on the display panel "carriage Jam". I have not given this printer any kind of abuse. I do leave it turned on but hardly ever print to it. I have replace the cartridges probably twice since i have owned it. Can you help me out as to what I should do with the printer

Can't really help with your Internet issues, but I can put you on the path to leaning more about Macs.
If you're a former Windows user, there many resources on Apple's web site to get yourself familiar with how Macs and OS X work.
Here ard a few areas to spend time with
http://www.apple.com/support/macbasics/
http://www.apple.com/support/imac/intel/
http://support.apple.com/videos/
http://www.apple.com/support/lion/
http://www.apple.com/support/osx/
For the video tutorials, in the video search box, just type in OS X. You'll get a list of OS X video tutorials to watch as you learn to use your iMac.
Start with the Anatomy of a Mac video first, Then the Finder Basics video second. After you have watched and put to use these two videos, you can watch any other OS X video you want in any order.
Here is a free eBook download of David Pogue's OS X Snow Leopard The Missing Manual here. While OS X 10.7 LIon and OS X 10.8 Mountain Lion work a bit differently than OS X 10.6 Snow Leopard, there are many things that still apply.
http://it-ebooks.info/book/337/
Good Luck!

Why do I get a dent in the paper in the photo tray. I have 6280 all-in-one photosmart? not print

I have a 6280 all-in-one printer and it will not pick up the photo papar from the photo tray. It has a message that says load paper glossy side down. I have paper in there. when I examine the photo paper it has a dent in the end that is inserted first. Please help and thank you.

This is a user forum I feel you need to deal with Adobe customer services or support chat did not work in you case.

I have 5 devices all on one itune account.i have not activated icloud because i dont want it to sync all our information together. is there a way to set it up to only sync the music together and not the contacts photos messages etc

i have 5 devices all on one itune account.i have not activated icloud because i dont want it to sync all our information together. is there a way to set it up to only sync the music together and not the contacts photos messages etc

Unless you subscribe to iTunes Match, iCloud doesn't sync music. Just set up every person's devices on a separate iCloud account and your iCloud data and photo stream will remain separated. Each iCloud account will need a separate ID, but it does not need to be the same as your iTunes ID. You can continue to share the same iTunes ID and maintain separate iCloud accounts with separate IDs for iCloud.
You'll also want to use separate IDs for each person for iMessage and FaceTime. This will keep your text messages and FaceTime called separated as well. The easiest way to do this is to have everyone use their iCloud ID for these two services as well.

I have a new all in one computor and I can't open E mails once I save them to Documents file.

I have a new all in one HP computor which has windows 7. When I save a E mail to Documents I cand open it back up.I have charter internet and the E mails are HTML>

Typically this is a problem when the sender creates the file with an extension that you, as the recipient, can not open. What is the file extension?
Is it .docx? If so, that requires MS Office Word 2010 or newer. MS Office Word versons circa 1997-2003 used .doc as the file extension. The default in 2010 is .docx There is an option within the save-as to select the older .doc extension.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Hi I have a Lexmark all in one printer how do I get it to work with my ipad mini

Hi I have a Lexmark all in one printer how do I get it to work with my mini ipad

It depends upon the model. It's wifi-enabled ? And is it listed on this page as supporting AirPrint : http://support.apple.com/kb/HT4356 ?
If not then do Lexmark have their own app in your country's store that supports that model ? If they don't then there are a number of third-party printer apps such as Print n Share and PrintCentral Pro which might work with it.

HT1595 I have 2 Apple TV's one the oldest works fine the 2nd one refuses to recognise the MacBook Pro its connected to but I can play media from the MacBook on the Apple TV from iTunes, help?

I have 2 Apple TV's one the oldest works fine the 2nd one refuses to recognise the MacBook Pro its connected to but I can play media from the MacBook on the Apple TV from iTunes, help?

Sorry, content bought with one Apple ID cannot be merged or transferred to another Apple ID.

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in one. Does anyone have printer suggestions that you know will scan wirelessly?

Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Do i have to activate all channels one at a time

do i have to activate all channels one at a time with Apple TV or is there a global activation

There are no global activations.
There is also no need to activate all apps... not all apps require activation.

HP Deskjet all-in-one F4440 will not print

My HP Deskjet all-in-one- F4440 will not print. I have put in a new color and a new black cartridge. It clanks loudly when it moves back and forth. Finally it stops and then pulls plain paper through as though printing on it - does this two or three times. then it pulls plain paper halfway through and stops. I have to tug and carefully pull halfway paper back out towards front to remove.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Are there any error messages or flashing lights? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

All-In-One C4795 won't print straight...! Ugh!

I have a C4795 All-In-One Printer that worked fine up until about a month ago. I tried to print a document, and when the printer pulled the paper in, it pulled it in crooked, even though the guides were aligned to make the paper straight. Then, when the document printed, there was about 1 1/2 inches at the top of the paper that are just gone -- it doesn't matter what type of document I print, it's missing that top section and the entire page is printing crooked.
Here's what I've done so far (and none of these things have helped at all):
I have opened the back of the printer up, looked inside with a flashlight and can't see anything that would be causing a paper jam.
I have taken the old paper out, put in fresh, new paper, and still get the same results.
I have resinstalled my software that came with the printer, but still get the same results.
I have used compressed air to clean any lint / dust out of the inside of the printer, but still get the same results.
I have performed a full/partial reset from the menu on the front of the printer, but still get the same results.
I pushed the paper in a little farther, thinking that it might be "catching" on something inside the printer that I can't see, but that didn't help.
I have cleaned the rollers inside.
I don't know what else to do. I haven't ever had trouble with this printer before and this started happening out of the blue. Any ideas / suggestions / help would be most appreciated.
Thanks so much!
Beth

The compressed air will generally not clean the rollers properly, try the procedure in this page.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Any suggestions for an all-in-one "cable modem router print server" (N)

any suggestions for an all-in-one "cable modem router print server" (N)?

If that's a problem with your cable company, change the company.
If your cable company is not able to provide you with a cable modem which gets you full performance for their service why would you bother with that company or try to make it better than them?
If you subscribe to a 100 Mbit/s service they must be able to provide you with a modem that does 100 Mbit/s and be able to demonstrate you 100 Mbit/s on your cable.
If they are unable to provide you with a modem which does 100 Mbit/s and thus cannot demonstrate that the service they have installed in fact can do 100 Mbit/s but only give you a 50 Mbit/s because that's the best they have, why bother buying yourself a better modem to find out whether or not their service does what it promises or not??
In addition, an integrated device won't get you better performance. On the contrary, consumer devices are generally single CPU (and core) devices. It's usually running some Linux or similar. If a single process gets overloaded it can drag down the performance of the whole device. For instance, let's say there is a bug in the print server software of the router. You print something and it hangs and the print server process on the router runs wild. Now the CPU is fully loaded and the routing performance will go down. If there is a bug in the routing software it will bring down the whole device and you can't even print.
You'll get the best performance if you use dedicated devices because then one device cannot overload another. Get a modem. Get a wireless ethernet router. Get a printer with integrated print server. That's far better.
It's like the all-purpose audio device compared to components...

Error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed? how??? thanks..

error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed? how??? seems to not power up ...thanks..

Hello
Is it possible to do a reset on the unit? Via: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00841912&cc=us&dlc=en&lc=en&product=2512009&tmp...
To try to get it in default mode
Kind regards
Best regards,
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
Although I work for HP my posts and replies are my own .....

IHP F2210 all in one deskjet, need to print in black, but prints in color

My HP F2210 all in one deskjet, is having printing issues. When I set it to print in draft in black ink only, it then prints in color, I just don't understand WHY, can anyone offer assistance?
thank you
miricro

Hi there miricro,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Moving and renaming clips in the Project Window is EXTREMELY slow, but the rest of the program is fine?! PPro CS6

I have Win7 Pro X64 with Core i7 and 32GB RAM...
When I'm editing and doing other things, adding FX etc, the program works fine BUT when I do ANYTHING in the Program Window i.e. renaming clips, moving clips, etc the program acts as if it's bogged down... I can't for the life of me figure this one out...
I don't have a large number of clips/footage items
I've cleaned the cache
What else could be causing this? When I say slow, I mean a good 10 seconds before the program responds to anything I've done, and when renaming clips, I always have to do it twice because the first time it doesn't "take"
Thanks all for any help!
Aza

It occurs with or without clips in a sequence... the problem isn't the sequences, the problem ONLY occurs in the Project Panel, every other panel is as fast as my machine will allow (very fast) only the PROJECT Panel is EXTREMELY slow when moving clips into folders, etc
ALSO, all my drives and preferences are set up the same in every project, only THIS project is moving slowly... I even divided the project up into 4 separate projects to cut down on the number of clips in each project, and it still moves slow... almost as if something has carried over to each project, or something

I have HP J3640 all in one. The printer is printing extremely slow

Similar Messages

Maybe you are looking for