I have hundreds of technical drawings on AppleWorks 6 - My present Mac is 10.4.11. I surmise that my only safe option is to buy another Mac to upgrade without loosing my ability to work on these drawings - Please does someone disagree - JN

Peggy wrote:
Any Mac introduced before Lion was released can run Snow Leopard, including the mid-2001 iMacs. So you can still get a current-generation Mac that runs Rosetta & use AppleWorks.
That's actually not true. Snow Leopard will only run on Intel Macs. The situation is this :
Any Mac capable of running Snow Leopard OR EARLIER will be able to run AW - Lion is the first OS that can't.
PPC Macs will run as far as Leopard 10.5.8 - they should have 1GB RAM minimum, but can run with less RAM for Tiger. They will all run AppleWorks.
All but the latest Intel Macs will run Snow Leopard and therefore Rosetta and therefore AW too.
However, current iMacs that come with Lion preinstalled can have 10.6 installed on a separate partition (must be 10.6.6 or later), to run Rosetta.
The current generation of MacBooks, and Air, cannot have 10.6 installed and therefore cannot run AW.
I don't know what the situation is with the latest Mac Pros.

Similar Messages

I have an iMac with 269 songs i would like to transfer music from my macbook with 10917 song s to the imac to free up space on the macbook without loosing my 269 song please help.

I have an iMac with 269 songs i would like to transfer music from my macbook with 10917 song s to the imac to free up space on the macbook without loosing my 269 song please help.

Welcome to the Apple Community.
If both Macs are on the same network, enable homesharing, you can then import music from one to the other without affecting what's already on there.

I was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

i was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

What exactly are you seeing on the phone's screen ? If the iTunes icon and cable then the phone is in recovery mode, in which case it's too late to take a new backup or to copy any content off the phone - you will have to connect the phone to your computer's iTunes and reset it back to factory defaults, after which you can restore to the last backup that you took or just resync your content to it

If i buy a unlocked iphone 4 from the uk would it work if i give it to someone in india

if i buy a unlocked iphone 4 from the uk would it work if i give it to someone in india to use?

Yes. But if it ever needs service, it will have to be sent back to someone in the UK. The warranty is not international.

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

I have two ipods for two children.All apps games and music ect, sync with both which is great.Now how can I give them there own game center IDs without loosing this perk?They would like to play and share games together and with friends.

I have two ipods for two children.They love playing the games.The great perk is there lynced so they share apps.Problem,how can I give them both individual IDs for game center without loosing this perk so that they can play with friends?

I have two ipods for two children.They love playing the games.The great perk is there lynced so they share apps.Problem,how can I give them both individual IDs for game center without loosing this perk so that they can play with friends?

What happen when you sell your computer and buy another one . How can I ahve my Acrobat working in my new computer ?

I have a serial number , and a CD ( DVD ) . But I dont have DVD or DC player in my computer . Also I have no idea about the number of the computers that I could have the same software.
Luciana

Luciana ribas wrote:
Am I in the wrong forum ?
Yeah but that's ok. This is an easy fix.
Uninstall Acrobat from your old computer. Then reinstall using the downloadable installer here --->PDF converter, PDF editor, convert to PDF | Adobe Acrobat XI Pro subscription
Then open it and go to Help and feed your serial number in there.

I have a Mac OS 10.6.7 that will not activate the scanner option on a C7280 HP All in One Printer, Fax, Scanner - the Printer works fine but the scanner does not - any suggestions?

I have a Mac OS 10.6.7 that will not activate the scanner portion of an HP C7280 All in One - prints fine - but won't activate scanner.

I have the same problem with an HP Scanjet 8250 and my Epson Stylus NX400. I have reloaded allegedly updated drivers. I have researched using SANE. Neither scanner wants to work since the OS X10.6 update. I have found very little out there about this problem.
Can anyone help me make these bricks work? Really would like a solution that won't cost me hundreds to replace the equipment. Thanks so much.

The iSight on my mac OS X version 10.8.2 aint working with Skype..please help:)

i just upated to mountain lion and now my cam on skype aint working and it keeps dropping calls..please help

Latest version of Skype?
In Skype > Preferences > Audio/Video, you should see yourself on Camera.
Dropped calls suggests significant Network latency over 70ms. If you camera were working, it would also freeze and jump under these conditions.
You can monitor your call health via the following setting.
Skype > Preferences > Advanced > Display Technical Call Information.

I've deleted app off my iPod and now I have pages that are only half full i was wondering how to fix it by moving apps to other pages? Any answers please help

Any answers will do please help

Tap one of the apps and hold your finger over it until you start to see all of your apps wiggle. You can then tap and drag them to any where you want. To drag it to another page either drag it to the far right or left depending on which direction you want to go. When you are done with the Home button.
B-rock

Can't upgrade without giving up access at work

We still use Tiger at work -- lots of G4s and G5s, Quark 6.5, and old, proprietary (database driven) production system. Any upgrade has to be planned carefully and will be a company-wide hardware and software upgrade.
Unfortunately, we can't justify upgrading an entire company to Snow Leopard so I can sync my calendar at home and at work. And I can't upgrade at home without giving up the work availability.
Sigh. Oh well.

Sounds just like the newspaper I retired from
I have a similar situation at home, with two machines which can't progress beyond 10.4.11. The bad news is that events added to a calendar on an iOS 4.x device will never sync to the Tiger machines. The "good" news is that it does work the other way around, so an event you add at work will show up on your home machines as long as you do not "upgrade" to the new MobileMe.
-dan

Touchsmart 600 1390 - issue after upgrade to Windows 8 - DVDBD wont work.

I successfully upgraded to Windows 8 and although the harddisk ran non stop for about a week, with me dubbing 8 - WindowsWait... It eventually finished whatever it thought it was doing and is about normal now.
EXCEPT the DVDBD that is onboard now can not read any media. I have uninstalled and reinstalled the Windows driver several times but without any resolution. I have searched the HP website but there is nothing i have found there - drivers or advice.
Any ideas?

Hello,
You have used the drive to install windows right? Was the unit working before you have done the upgrade?
Optical drives should not give any problem after an upgrade, other components you might not get a driver due to manufacturer not releasing it, but not the optical drive...
Make sure you have your windows activated and you have all windows updates already installed...
How is the optical drive detected in windows explorer and device manager? Can you tell me how the drive is detected?
Thanks,
I work for HP! Please remember to provide and if this helped click ON

I have imported contacts from Outlook to Mail and they have synced via iCloud to my iPhone 3GS. I can't get my iPhone to make a call using these contacts but if I dial the number of any of the contacts on the keypad, the call DOES work! Help me please!?

I have imported contacts from Outlook to Mail and they have synced via iCloud to my iPhone 3GS. I can't get my iPhone to make a call using these contacts (it tries but then says call ended) but if I dial the number of any of the contacts on the keypad, the call DOES work! Help me please - is there something I need to do to the contacts because tehy came from Outlook? Thanks

Thank you for replying. Yes I deleted the old email address..

Aperture 3.2.4 macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony

We have concerns with Adobe Acrobat DC - document cloud services and how it relates to HIPAA. Has anyone else worked through these issues?

We have questions relating to the Document Cloud services offered with Acrobat DC. We are considering disabling the cloud feature to stay in compliance with HIPAA. Has anyone else worked through these issues?

Hi mikem82897618,
You can refer the following link to know what can be done with Adobe Document Cloud Services when working in Acrobat DC:
Store Files Online, Share & Access From Anywhere | Adobe Acrobat.com
Also, visit this link to know more on how Adobe Document Cloud services are compliant with HIPAA security standards:
E-signatures vs digital signatures | eSign services from Adobe
Please specify more details on the same as why you would need to disable the Cloud feature.
What and where exactly are you facing the trouble?
Let me know.
Regards,
Anubha

I have hundreds of technical drawings on AppleWorks 6 - My present Mac is 10.4.11. I surmise that my only safe option is to buy another Mac to upgrade without loosing my ability to work on these drawings - Please does someone disagree - JN

Similar Messages

Maybe you are looking for