I have Illustrator CC, but I can't open some eps files.

It is giving me the "this file was created in a newer version of Illustrator" error. But that can't be, right? I am up to date on updates for CC. I can place the file in a new Illustrator file and then embed it, but I shouldn't have to do that. Any ideas?

Give this a try:
https://discussions.apple.com/message/15224241#15224241

Similar Messages

I have Lightroom 3.6 and Camera Raw 6.6 but I can't open my CR2 files from my Canon eos 6D

Hi,
I have Lightroom 3.6 and Camera Raw 6.6 but I can't open my CR2 files from my Canon eos 6D
Lightroom doesn't show a thumbnail image and when trying to import it says the camera format isn't supported. But normaly Camera raw 6.6 should cover the Canon eos 6D
All help is welcome,
Thanks

No, the older versions are not free. If you upgrade you will have to get Lr5 unless you can still find Lr4 for sale somewhere as it has been discontinued by Adobe. You can also use the FREE DNG converter to convert the 6d files for use in Lr3.6.

I have downloded ilife , but now can't open iPhoto

i have downloded ilife , but now can't open iPhoto

Give this a try:
https://discussions.apple.com/message/15224241#15224241

I've upgraded to OS X10.8.2 but I can't open power pc files and applications

I've upgraded to OS X10.8.2 but I can't open power pc files and applications

Note that there's no such thing as "PowerPC files." PowerPC applications won't work on OS X 10.7 or higher, but the files created by those apps can still be opened if there is an updated version of that app. For example, if you have MS Office 2004, you cannot open any of those Office apps, and thus cannot open any of your Office documents. However, if you upgrade to Office 2011, or some other substitute (such as Apple's iWork suite or the free OpenOffice or LibreOffice), you will be able to open those documents again just fine.

I have acrobat pro but I can't open pdf files now.

I have acrobat pro But since a few days ago I can't open any pdf file anymore.If I try with reader I do,but not with acrobat pro.
I need help please.

Do two steps and then retry. Open Acrobat and then
1. Help>Repair
2. Help>Updates
Since it had been working, I assume there was no change in OS or Acrobat.

I have panasonic 3g but i can't open it on my mac os

I have just brought a panasonic 3g but i can't open photos my mac os 10.1?

You didn't say which iMac and which camera you have, but it should work. 10.1 came out in 2001. I assume you are connecting using the USB cable that came with the camera. What if any error messages are you getting? Does the camera show up as connected when you check About This Mac under Hardware and USB?

Photoshop CS Extended can't open some PSD files

Hi,
Yesterday I have created a new PSD file and worked on it and finally saved the file, but now i can't open the file any more. PS always fails to open the file, because of an internal error.
I have tried to open some other PSD files, but 3 of 4 files (on my current HDD) didn't work to open and i don't know why. All of those other PSD files are at least 1 month old and PS could open these files. The last time i have opened these files was two weeks ago. The one PSD file, that worked has the following properties:
image: 1179x1528, 72ppi,8bit,RGB, 15,04 MB
and the files that don't work have the following properties:
image1: 454x340, 71ppi, 16bit, RGB, sRGB (profile), 1,17 MB
image2: 1280x1024, 71ppi, 8bit, RGB, sRGB, 1,92 MB
image3: 1191x1644, 71ppi, 16bit, RGB, sRGB, 12,02 MB
I have got, the meta-data out of Adobe Bridge. I can see the preview Image and the thumbnails in the open-dialog of PS. I tried to open the file with other applications like Paintshop Pro and PhotoImpact and both couldn't open them. Paintshop Pro quits, because it doesn't support the "color model".
I don't know, what else i can do to open these files. I looked around the forum but couldn't find any solution for my problem.
Does anyone know a solution for my problem ?
evangelion2100
PS: I have deleted the pref-file of PS and still it didn't work.

Dear all. After getting the same problem and read all possible solutions online with no success finally I got rid of this problem successfully and Now it is working perfectly again, and I hope It will work for you all.
Here it goes:
BACKGROUND (my case): PS CS3 installed (Premium-Extended), Win Vista 32 Bits. For months it was working perfectly until yesterday, when the app stopped when attempting opening some PSD files. Some other CS3 apps either stopped. 1st I thought it was some kind of file corruption issue.
After 3 uninstall-reinstall attempts of the whole CS3 and still troubleshooting, I went to the Vista Error Log. Regarding PS CS3 there was a DLL file named "CoolType.dll" which was suspicious to be the main cause of this ****.
Making a research, it relates to installed Fonts in Windows, that gave me the clue to all of it.
Yesterday, I installed fonts while working with PS CS3 Im now pretty sure that this process someway altered the Cooltype.dll file, or fonts were not installed properly.
SOLUTION (my case): locate and uninstall recent fonts (which may have been the problem). NOW my PS3 CS3 is working more than PERFECT!!
HOPE THIS CAN HELP. I think this topic regards some kind of failed font installation. Check it out and remember if you have modified something.

Can't open some PDF files

These are probably very basic questions but here they go. I am having some trouble opening some PDF files from my school's website. I can download them just fine but when I try to open them a window pops up saying the file could not be open because there was an error.
The tricky thing is I was able to download and open PDF files from other sources (mainly email).
Because of that I went into Adobe's website and dowloaded and installed both Adobe Flash and Adobe Reader over the copies that I already had on my computer. Is that bad? Does the computer just write the new copy over the previous one I had without a problem or does it now have duplicated files in the program's folder that could lead to future malfunctioning?
Even tough I haven't noticed any changes in performance yet could that be concern for future problems (crashing, computer slowing down)? Should I reformat the HD to factory settings and start from scratch since I do not have almost any info/ files in the computer yet? Or am I better off leaving the computer as it is and not messing with trying to reformat.
When a
The other question I have is can there be PDF files that open only in Windows OS and PDF files that would work on both?
Thanks in advance

Probably you're opening pdfs using Preview. Preview is very good and it'll open almost any pdf but not 100% of them, for that you must use Acrobat Reader.
What you did was fine, just keep using the computer.

Reader 10 can't open some .pdf files

Reader 10 on a Windows Vista system cannot open some .pdf files. Ones that I create within MS Office open fine. An IRS file (Form W-9) opens fine online, but won't open after downloading. The computer response is "Not responding". Uninstall/reinstall hasn't changed anything, nor has rebooting. Does anybody have suggestions how to tackle this problem?

HI,
It is happening to me too! What browser are you using? It happens to me in Firefox on my brand new MacBook Pro. I don't have the problem on my old MacBook Air....
Kind regards,
Becky

Can't Open Some Document Files, Told To Install Pages 5.0, It Is. What Can i Do?

Pages 5.0 Installed. Now I cant open some document files. I'm asked to install Pages 5.0. I have to take additional steps to Open Under etc. What can I Do?

Sounds like some of those may be Pages '08 files.
You need to open and resave those from Pages '09.
Peter

I edited my movie with an iMac. Now I have a Win but I can't open the project

I edited my movie with Premiere Pro CS5 in an iMac. Now I need to make some changes, but I have a Windows station.
When I try to open the project, an error message comes up:
"This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type".
I read similar threads and I tried everything, but nothing worked.
I'd truly appreciate if anybody could lend me a hand on this.
Thank you very much.

Jim,
I've tried, but no luck. In other project files I have in this computer ("good files"), they have different values on those lines. The only one that is common in all is:
<Project ObjectID="1" ClassID="62ad66dd-0dcd-42da-a660-6d8fbde94876" Version="23">
and in the "bad file" the Version is "25".
I tried to changing it...but no luck.
I'm sure in this code there is the explanation/solution for all this, but there are thousands of code lines, and the word sequence appears too many times.
It's first time I heard about XML export and I haven't been able to find any XML file.

I just updated Indesign but still can't open an .indd file.

I just updated Indesign through the Creative Cloud App, but I still can't open a file provided by a client. The error message says the file was saved with "a newer version of Adobe Indesign CC (9.2). Not sure why this is the case since I have a CC subscription. Any advice would be appreciated. Thanks.

Okay, I figured it out. There are 2 versions of Indesign, Illustrator and Photoshop currently released by Adobe: CS6 and CC. Hadn't been paying attention, so it was confusing. It's not immediately clear on the Adobe site that there are 2 versions. Not very good customer support/relations in that respect.

Can only open some JPEG files in Camera Raw through Bridge CS3

I'm running Bridge CS3 version 2.0.0.975. I always edit my JPEG files through Camera Raw in Bridge CS3. I only have to Right-Click on the file and select "Open in Camera Raw...". However, I've come into a situation where some jpg files will not open this way; the option is not even there.
I have made sure to tick the box in preferences under Behavior "Double-Click Edits Camera Raw Settings in Bridge", and also tick the box under Thumbnails -> Performance and File Handling "Prefer Adobe Camera Raw for JPEG and TIFF Files.
These files were originally 16bit Grayscale TIFF files, but I changed them to RGB 8bit JPEG files.
Also, I know the program works because I navigate to an older photo I worked which is a JPEG and the "Open in Camera Raw..." option is there when I Right-Click, but then I navigate back to the image I want to edit, and the option is not there.
Here are links to my screenshots of what I'm talking about. Both images in the last two screenshots are JPEG:
General Prefs - http://img535.imageshack.us/i/prefgeneral.png/
Thumbnail Prefs - http://img716.imageshack.us/i/prefthumbnails.png/
Camera Raw Option - http://img847.imageshack.us/i/option.png/
Camera Raw No Option - http://img852.imageshack.us/i/nooption.png/

function(){return A.apply(null,[this].concat($A(arguments)))}
MapsCollector wrote:
When I open Photoshop CS3, then go File -> Open As and change the Format Type to "Camera Raw", the JPEG files vanish and I can only see the TIF files. When I open them, it doesn't open in Camera Raw, but rather opens like a normal file would.
That's a fundamental problem right there, and a clue in all this. You should be able to see JPEGs in the Open As Camera Raw dialog.
What happens if you type in the name?
I'm almost convinced you have a file named .jpg but with a different image format inside. Can you put one of these files online for others to try to open?
-Noel

Can't open some .mov files

When I try to open some of my older (2007) .mov files with either QuickTime Player or QuickTime Player 7, I get two error messages in series from QuickTime. First: "Searching for movie data in file "NC051large.mov". After a minute or two, Quicktime says the file can’t be found. If I cancel the search before it completes on its own, another message appears: "The movie could not be opened. The operation couldn't be completed. (OSStatus error -128)”. I did Spotlight searches, but the NC file apparently does not exist on my iBook. Many related .mov files of the same vintage open fine in both versions of QuickTime, but many others have the problem I am describing.
When I double click the icon for any of the problem .mov files in the Finder, Snow Leopard tries to open them with QuickTime Player 7, which is the program the movies originally were saved in. In desperation, I’ve tried unsuccessfully to open and/or convert three of the problem files with a variety of video editing applications, including: File Juicer, iSkysoft Video Converter, iSquint, Prism, and MacTheRipper. Nothing can either open or convert them. Attempts at conversion hang the application(s).
The Get Info window identifies all three files as QuickTime movies with the following Codecs: Sorenson Video 3, ACC, and Sprite. Curiously, the Preview section of the Get Info window is able to play one of these movies just fine, but the other two play in this window only as black boxes.
While my searches on the web, Apple’s support site, and this forum have found many problems where QuickTime is unable to open .mov files, none of these problems appear to be like the one I’m having. I’m at a loss at this point and would appreciate any suggestions that might be implemented by a mid-level user like myself.

"Searching for movie data in file "NC051large.mov"...
How large are these files according to the finder? Sounds as if this file is a QT "reference" file which merely "points" to the second file which actually contains the data. If you deleted the file (or did not copy it along with the reference file), then you cannot open/play the reference file. The second message error, -128 (userCanceledErr) is a Menu Manager Error telling you it could not complete the current operation because you cancelled what it was doing.

Printer can't open my EPS file

A bit of an emergency going on here...I'm trying to deliver art to a printer and they are having trouble opening my files. I've got CS5 and they're using Corel X3.
When they try to open my AI file they're getting a 'corrupted' error. I sent EPS versions and they're getting font-related errors - but all of my fonts are outlined (the first thing I confirmed).
Help? Thoughts?
Thanks!

And what happens, if they simply ignore the errors? Many times such stuff is just redundant information and the files will work just fine. Other than that the obvious choice would be sending a print ready PDF, bypassing any work in Corel at the risk of potential issues if you didn't work based on their color profiles and print specs...
Mylenium

I have Illustrator CC, but I can't open some eps files.

Similar Messages

Maybe you are looking for