I have imported a video from FCP X and there is no volume when I bring it into AE CS6

I am importing a video clip form FCPX into AE CS6 and there is no volume. What happened?

I exported out of FCPX Apple Pro Res 4444  1440 x 1080 vieo and Audio. Then imported into After Effects Pre Set for
HDTV 1080 29.97 frame rate  1920 X 1080. In the project area it shows the volume etc. When I drag it into the composition no sound.
Thanks for responding

Similar Messages

  • IDVD behaving strangely with HDV video from FCP X and FCP 7?

    AVCHD exported from FCP X as ProRes 422 works perfectly in iDVD producing a 16:9 DVD.
    HDV doesn't, even though QT Player plays it perfectly.
    The odd thing is that 4 years ago, using legacy FCP my exported HDV videos had no problems being recognised as 16:9 by iDVD.
    So why are FCP X produced HDV videos not recognised as 16:9?
    P.S.  I know that iDVD never recognised DV in the 16:9 format but it always worked with HDV.
    Incidentally, the old trick of opening it in QT Pro and changing the frame size to 1024 x 576 does not work!
    Even stranger, I have just opened the HDV clips in FCP 7 and exported them as a QuickTime Movie.
    iDVD plays them back in the correct aspect ratio but look at the effect  .  .  .  .  muted colours and green patterns all over.
    This never happened in the past!

    I mentioned several problems so I don't know which one you are referring to. 
    After experimenting I found some workarounds.
    To cure the squashed image I created a ProRes 422 preset in Compressor 4 with a frame size of 1920 x 1080 and exported from FCP X using Compressor Presets.
    Everything now works perfectly except the encoding seems to take  longer.
    I got rid of the moire pattern when using FCP 7 by exporting as ProRes 422 1920 x 1080.

  • I have my serial numbers from original purchase and they do not work when installing Adobe CS5

    Cannot install Adobe CS5 on my MAC, even though I have my original serial numbers. I have been on hold with Customer Support for 51 minutes now and getting very frustrated - please help asap

    What is the error message you are receiving?

  • Importing my video from my event library into my project library, it shows the full width of the clip, but on the viewing section, it's zoomed in and cut the sides of the video off.  How do I stop this from happening?

    When importing my video from the event library to the project library, it's zooming in and
    narrowing the width of my footage.  How do I stop this from happening?

    In the project, double-click on the clip to open the Clip Inspector. In the Clip tab you will see an item about two thirds down labelled "Stabilization". If checked, uncheck the box "Smooth clip motion".
    Stabilizing clips causes a zoomed in effect, with the extent of the zoom dependent upon how shaky the footage is. There is a slider beneath the check-box labelled "Maximum Zoom" - this can be draggged back and forth to adjust the zoom effect if desired, once the clip has been stabilized.
    You may have chosen to analyze clips for stabilization when importing to iMovie (that's a choice provided by iMovie upon import). If so, it's best to turn off an option in iMovie's preferences. Go to this from the iMovie menu item iMovie>Preferences. Click on the Browser tab and deselect (uncheck) the box labelled "Automatically stabilize clips that have been analyzed".
    I prefer to import clips without analyzing, as this speeds up the import process. Afterwards, in the Event you can check for any overly shaky clips, then analyze them in the Inspector. If necessary, once dropped into a Project, you can stabilize them as desired. You can also stabilize clips directly in the Project without having to first analyze them in the Event.
    John
    Message was edited by: John Cogdell

  • Exporting video from FCP scrunches it.

    When I export my video from FCP it gets scrunched. Imagine that you start with a square and you export it and it comes out like a vertical rectangle. It looks correct in FCPs image and wireframe box, but it is not correct according to the title safe boxes. When I play the exported video it includes black space on both sider of the video. What can I do? I set the Motion project presets to NTSC DV (720 X 480) and FCP sequence settings to NTSC DV (3:2) (720 X 480) and I don't have the Anamorphic 16:9 checked. How can I export this without scrunching or squeezing it?

    Welcome to the family.
    You can only go through your settings very carefully, one at a time. If the sequence is DV, the clips are DV, and the export is DV, the resulting file will be DV. Our experience around here is this question is 99.9% user error caused by the fact that FCP's various settings are weirdly conflicting with common sense or other parts of the process.
    Good questions to answer: Why are you exporting out of FCP and where are you viewing this exported file?
    bogiesan

  • IMovie will only import short videos from my camera.

    Hello,
    I recently bought a Sony CyberShot DSC-HX50 camera.   I filled one 8 GB memory card and have half-filled a 16 GB card (I was overseas and couldn't download photos to my MacBook Pro, which was at home).   I have the most recent version of iMovie but this is the first time I've used it.  My MacBook has a new solid-state hard drive and plenty of memory.
    iMovie does not "see" ANY of the videos on the 8 GB card; the videos are all either about one, three, or seven minutes long.  On the 16 GB card, it only "sees" the videos that are under one minute.  I have imported those videos to iMovie, but I can't get it to "see" the other, longer ones.  I've tried unplugging and replugging the camera cable, removing and replacing the memory card, turning the camera on and off, and shutting off and restarting iMovie.   I've gone through all of the options in the toolbar and haven't found the answer, and the "help" option isn't helpful at all.  The videos play fine on the camera screen.
    All iMovie does when I try to "import from camera"  from the 8 GB card is show the little icons that look like a piece of old-fashioned camera film; no indication at all that there are any videos on the camera card.  When I try to import from the 16 GB card, iMovie just shows the three short videos and no indication that the longer ones exist.
    Interestingly, iPhoto can "see" the same movies iMovie can.  I understand iPhoto is not set up to download longer movies (although it has downloaded movies from my iPod that are several minutes long).  But I have no idea why iMovie isn't cooperating.
    Help, please!  Thank you!

    OK thanks. I downloaded the Simple Transfer app but not too sure how to use it to transfer pics back to PC.  It asked me to go to a website but I couldn't get it to transfer anything - it seemed to only want to transfer from my PC to the Ipad and not the other way around.
    I'm very new to apple products so big learning curve for me.
    Any suggestions?
    Thank you for your help.

  • Importing Digital8 Video from Camcorder

    I am having problems importing digital8 video from a Sony camcorder. The import process starts out fine with each clip tagged with the correct date the video was shot. At some point, the import process results in a clip for each second or so of video, meaning that there is a thumbnail for each second or so. I notice that the affected clips have a errant year code - 65590. Any thoughts on what is causing the problem, and what I can do to fix the problem?

    hey there Beverly,
    i had a similar issue when i got my 1st MiniDV cam & i couldn't import because i hadn't installed the battery to set the clock & calendar. coming from analog cam, i didn't care about superimposing the time & date on my footage. so, then i actually read the user manual, found that little bit of info about the button battery.

  • HT201317 after i import my photo from iphone to pc, there's a video that i can't delete?

    after i import my photo from iphone to pc, there's a video that i can't delete? on my iphone. The video file is from my computer.

    Hi SyahirahS,
    Welcome to the Support Communities!
    If the video was synced from iTunes when you connected your iPhone to the PC, you would have to remove it the same way. 
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/ph12313
    Cheers,
    - Judy

  • Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

    Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

    It is a hard one.. laptops with small drives are a pain.
    What you need is a home media server.
    Some people use a PC running itunes for cost.. but that is nothing like as good as using a Mac mini.. they make great little HTPC device.. you can plug in large hard disks and store all your files and media. And share it with the network.. Read up apple's instructions on home sharing.
    https://www.apple.com/au/support/homesharing/
    For cost you can buy a mini from 2011 or 2012.. I would not recommend earlier ones.. the advantage of 2012 is they have USB3 ports. But you will pay more for them.. new mini is not as useful.. they have soldered in memory and you cannot upgrade.. the old mini was the most easily modified mac in the whole range. Uses little power and can be bought for a $300US for a good one second hand.. maybe less.

  • I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

    i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
    i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
    i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
    now the things i want to use with my mac that i thought would be even simpler...are not even useable...
    help

    That camera shoots H.264 in an .avi wrapper.
    You will have to transfer the files via the Finder.
    Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
    Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

  • Can't import live video from Sony PD 170.

    Just got Final Cut Pro X. In a New Event I am able to import live video from the new MacBook Pro computer's built-in camera and pre-recorded video from my Sony PD-170 camera. However, when trying to import live video from the PD-170, the program only APPEARS to do so--the clips never show up once I close the import window. Any suggestions?

    I think iMovie is corrupted. I would like to try to uninstall iLife 11 but when I put in the disc there is no uninstall option. I tried trashing iMovie from applications and reinstalled all of iLife (I believe wasted space on my HD) but the issue remains. (Maybe because I didn't delete the receipts?) iMovie can not see any devices or use iSight for capture...

  • I have imported a document from my old Windows PC but on the Mac the text is misaligned and the pictures are gobbledygook. It looks fine on the thumbnail. How do I see my documents in Mac as they appeared in Windows?

    I have imported a document from my old Windows PC but on the Mac the text is misaligned and the pictures are gobbledygook. It looks fine on the thumbnail
    on the desktop. How do I see my documents in Mac as they appeared in Windows?

    To view it in an acceptable format, yes.  You can try using an opensource program such as OpenOffice or LibreOffice and see if it yields better results.  However, I'm sure if it would be compatible with a document made with word processing software from 9 years ago, but I would certainly give it a try.

  • Why can I not import the videos from my iPhone 4 onto my desktop (Windows Vista)? When I plug in it imports the photos without a problem but it doesn't seem to import the videos.

    Why can I not import the videos from my iPhone 4 onto my desktop (Windows Vista)? When I plug in it imports the photos without a problem but it doesn't seem to import the videos.

    1.Download the Flash setup file from here: <br />
    [http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
    Save it to your Desktop.<br />
    2. Close Firefox using File > Exit <br />
    then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
    {XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
    3. Then run the Flash setup file from your Desktop.
    * On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). <br />
    See this: <br />
    [http://vistasupport.mvps.org/run_as_administrator.htm]

  • I have imported a csv from my mortgage repayments, my father and I pay seperate amounts. I am trying to show how much I have paid vs what he has paid, how much is owed and what % we own.. We are 50/50 on the property

    I have imported a csv from my mortgage repayments, my father and I pay seperate amounts. I am trying to show how much I have paid vs what he has paid, how much is owed and what % we own.. We are 50/50 on the property.. Help?

    Hi Spears,
    I not sure what your actual question is.
    Does the CSV file include only your payments? Your payments and your dad's payments as separate items?
    Do you want to com[are ongoing payments, or do you want to compare the current totals paid by each? Is the 'we' in "what we own" collective, or individual? DItto for "how much is owed."
    Too many loose ends to tie down a clear answer.
    Regards,
    Barry

  • Can the exported video from FCP X play in WMV?

    (1) Can the exported video from FCP X play in WMV?
    (2) If not, can I convert with the help of Compressor 4 to make it to play in WMV?

    No to both. You need third party software to create WMV. Telestream has tools for this.

Maybe you are looking for