I have imported my FAVORITES from IE, but don't know how to bookmark a page and move it into the FAVORITES specific folder. in English
After having imported my FAVORITES from IE, how do I bookmark a page and move it into a specific folder?
Since I also use IE, will my FAVORITES still be there?
see analytical information:
[https://support.mozilla.org/en-US/kb/how-do-i-use-bookmarks
How do I use bookmarks?]
"Since I also use IE,...... there?" yes it is(if you do not delete it).
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.
Similar Messages
-
Why cant I buy a single song for a ring tone but can buy the whole song? I have two that I got with an ap on my phone but it was transferred to my e mail and i don't know how to get it on my phone as a ring tone !
BJ4Ever wrote:
Why cant I buy a single song for a ring tone but can buy the whole song?
Because not all songs are licensed (by the label) to be used as a ringtone. -
I recently broke my 2008 macbook. i was able to use an external hardrive to back up my data onto My Passport. I was going to buy a new computer but a friend told me sher had an older version of the iMac. (not sure how old but it doesnt have a camera if that helps) i was able to hook it up and turn it on but i ran into a few problems. 1) the "authentic" user or whatever it says is someone who previously used the computer. i added me as a user but im not sure how to make me the main user. 2) after hooking up My Passport, i was able to drag my files and copy them to the desktop.(i think i did it correctly) now, i dont know how to make my hard drive and applications and iformation the "main " info. The current apps on the iMac are super old versions of iTunes and iPhoto and such. 3) while trying to open the apps from my macbook on the iMac, it said it didnt have the right software to open these apps.
I am so computer illiterate so someone please help!!! Also, i do not have internet in my new apartment yet so if there is a way to make this happen without using the internet that would be preferred. sorry for the horrible spelling and poorly written paragraph.
THANK YOU!!You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one. -
I have pictures on a usb card but don't know how to transfer them to my mac
I have taken pictures from my camera and put them on a usb card. I can't seem to transfer them to iphoto...can someone please give me step by step on how to do this.
tkssame exact answer except to mount the USB card to a USB port
if iPhoto does not open then launch it and use the file menu ===> import command to import them
LN -
I went online and in the original content booklet that came with my mac. Ive tried starting it up holding shift, option, and control option P and R. I put in the original startup/install cd but I want to avoid re-installing everything and losing all my content. (files, songs etc). How can I get past the leopard installer to see if I've lost everything? And not sure what leopard I'm running but its about 4 years old.
See Kappy's going back to SL from Lion guide.
-
I downloaded ringtone from the app store,but then i had to change my phone. I thought i had backed up all of mydownloads but the ringtone did not load to the new phone. I have the receipt number in my e-mail but don,t know how to retrieve it
I downloaded ringtone from the app store,but then i had to change my phone. I thought i had backed up all of mydownloads but the ringtone did not load to the new phone. I have the receipt number in my e-mail but don,t know how to retrieve it
-
I have purchased my first smart phone, an iphone 5. I would like to use some of the sounds from text messages for ringtones but don't know how to move them over. Any help would be appericated.
I'm sorry, had you already pointed out the rules which stated that lines from 2 separate accounts were eligible??? I don't see anywhere in the advertisement specifically stating that lines from 2 separate accounts would be eligible, so THAT is not what's advertised, either.
As far as I know Verizon's BOGO offers have ALWAYS been for lines on the same account. Possibly someone could chime in where they have received this offer on 2 separate accounts? The ONLY exception to this was someone getting the offer with 2 eligible lines on their account, reactivating the old phone on one of the lines and then giving one of the new phones to someone on another account.
Sorry if you think simply because someone disagrees with you, they are being condescending. That is certainly not the case. Good luck. -
I have a new iPhone for work, set up on a new iTunes account (PC). I was told i can associate it to my home iTunes account (iMac) but don't know how. I want to save the work related apps as well. Any advice? Thanks
Thanks. I messed up with my husbands iphone because I was told the wrong thing. Now everytime I sync his phone it makes it look just like the other phone I had. Do you know how I can fix taht for his phone? Any settings I can turn off that will prevent all of my apps/contacts, etc from auto populating his phone?
-
when i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it help
Hello Todd:
I had this very same problem when trying to activate iMessage and Facetime on my iPad. When I signed into my account, I actually wasn't even presented with the option of a phone number - notwithstanding the fact that I was contacting others (and being reached by others) by my phone number on my iPhone. Having both the iPad and the iPhone on, I kept trying to turn off and on both iMessage and Facebook in Settings on both my iPad and iPhone, hoping that that they would eventually sync. But this proposed solution by others was unsuccessful for me.
Then, I found out what the problem was: When my iPhone was activated, it automatically registered my phone number for contact purposes. I was using iMessage on my iPhone for quite some time without actually being signed into my Apple ID account. When another device - such as an iPad or iPod - is being used for iMessage or Facebook, you are prompted to sign into your Apple account, using your username and password. These two devices will not register your phone number as an option for contact unless your iPhone is signed into your Apple account as well. In other words: your phone number will not be synced.
Go into your "Settings" on your iPhone and click on "Messages". Scroll down and click on "Send & Receive" (which should be followed by your phone number). On the next page, you will be able to determine whether or not your iPhone is using the Apple ID for messaging purposes. (Note: This information applies for Facetime as well.) If it is using your Apple ID for messaging, than at the top, you will see "Apple ID: <your particular e-mail account>" in Blue text. However, if you are not using your Apple ID for messaging, than you will see the words: "Use your Apple ID for message". Even though below this you will see your phone number checked as the contact source, you will want to click the tab that says, "Use your Apple ID for message". Sign into your account (just as you must sign in for iMessage on your other devices), and just choose your phone number as the "Send & Receive" contact. (The option of the e-mail will be there too, but you don't have to check it. And later on, you can delete it as an option.)
Now that all of your devices are signed in using your Apple ID, the other devices should register your phone number as a choice. It may take a little while, however. What I did was sign out of iMessage on my iPad, and then sign in again. If the option didn't appear, I just went back and signed in again, and kept doing this until the option for the phone number appeared.
Again, this will work for Facetime as well. The solution is to sync your iPhone account with the other devices by using your Apple ID for messaging (and Facetime) purposes.
I hope that this works for you, Todd! ~ Brian -
I added items to my iPad calendar yesterday but they wouldn't copy into the calendar on my IPhone. I switched both devices off and on again but to no avail. The calendars were all ticked the same. I have now deleted the iCloud calendar from the iPhone but don't know how to get it back.
My Errands app is also not syncing. If I mark something as Done on the iPad, it's not removing them on the iPhone version.Hi SwimmingMummy,
I have a couple of articles here for you that will help you troubleshoot these issues with Reminders and Calendar:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999
iCloud: Troubleshooting iCloud Reminders and Tasks
http://support.apple.com/kb/TS4000
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and photos?
Heya Katie!!
So, the article you have there, HT4895, is pretty good. Just look at the FAQ section of it.
But basically, you will want to create a backup on your computer through iTunes...Just plug your current iPad into it and make sure your iPad and iTunes are logged in with the same Apple ID. At that point, just create a backup.
When you get your new iPad, and before you plug it in or set it up, follow the directions in this link to change your Apple ID. http://support.apple.com/kb/HT5621?viewlocale=en_US
Once you have that done, plug your new iPad into your computer to sync up with iTunes. Follow the directions for Restore from Backup and it should bring all that info back to your new iPad.
And changing your Apple ID email info will allow you to have your own!!! This should solve all your issues and GL!!! -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Where is the data file for the address book located, I need to restore mine from backup but don't know where it is to do so. Putting my Mac Pro onto icloud synching contacts resulted in duplicate and triplicates of the same cards. I have a few THOUSAND contacts and the last time this happened was on mobile me. that had a function where you could replace info on the mobile me server with info on the computer. I see no way to do that on the new cloud.
In the stupidly hidden user's Library->/Application Support/AddressBook/ labeled as AddressBook-v22.abcddb
For TM restores, see Pondini's TM FAQs for starters, since I don't use TM. -
I bought two films on my ipod tough 4g ( normally comes up on my ipad if i have bought something on my ipod) but i dont know how to get the two films on my ipad without paying for them.
Movies work differant than TV shows, music and apps. With movies, to get them from one device such as an iPod Touch to an iPad, you would need to connect the Touch to your computer first and in iTunes under the file menu, hit transfer purchases. Next connect the iPad and you can sync the movie to the iPad.
While the iPad is connected to the computer, in iTunes, click on the iPad in the left pane and when the screen loads, click movies and from there, you can select the movie that you want to sync. -
I have realised over time I have created multiple accounts. I have bought music on my Iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know how to contact someone in Itune to help me. PLEASE
I don't have the app adn no expereince with it, but it appears basec on teh app description you may need it installed on your MAC as well to download the files.
You might find help on the vendors website: http://www.nfinityinc.com/index.html
Maybe you are looking for
-
Why does deleted email reload on ipad
Frequently and irritatingly, my optimum online email reloads itself onto my mobile devices (ipad, iphone) even when i have deleted them and emptied the trasth. Any solutions?
-
I was order a recovery disc for my computer and I accident type the last letter of the serial wrong and I call HP to cancel that order and they said I can't cancel the order, what do i have to do to cancel the order.
-
Copy data between 2 localisations
My client is using Sap business one 2007A. he has a database with localization "Spain". he created another database with UK localization. he needs to copy the accounting entries from the first to the other one. copy express doesnt allow to copy data
-
How to open IE tab in Firefox on a Mac?
I need to open an IE tab on my Mac, have downloaded Firefox but can't seem to work out how to open the tab/says I don't have the right platform?
-
Can we delete adapters directly from OIM tables?
Hi, Im working in OIM 10g. we have an OOTB adapter create mailbox and we made some changes in the xml file and import that once again.after that we are getting error in the adapter. We again reimport the old one but that also taking the previous ones