I have imported my I photo library into Aperture. all the old i photo events are now in the aperture library showing number of photos but when clicked none display. I can see the photos if i run the cursor over the project. Help please.

I imported my i photo library into aperture.
I can see the i photo events in aperture library as events with the number of photos in each event.
When you click events in the aperture library no photos appear although if you roll the cursor over the event icon it show the photos. If you click on the event either on the event icon or in the library no photos appear.
Help

Check, if you have any filters set. The search fields in the Insector panel and the browser should be showing "All items" or "Showing All".
The Browser search field could be set for each project and album individually, so you have to check it for each project.
Regards
Léonie
For example: The projects count shows "20 items", but the browser is empty, because the project's filter is set to show only rejected items.

Similar Messages

Firefox won't start,but when I shut my computer down it says that it is running. What is the problem?

Firefox will not open, but when I shut my computer down it says that it is running and must be forced quit. Once I rebute the computer it opens but is very slow and hang up on many web pages. I have reinstalled it with little help. In contrast, Windows Internet Explorer works fine.

Did you check your security software (firewall)?<br />
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.<br />
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.<br />
See:
* [[Server not found]]
* [[Firewalls]]
See also (Hang at exit):
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]
* http://kb.mozillazine.org/Browser_will_not_start_up

Where can I see my camera roll's photos which already backup into the icloud on my win7 pc ? I tried open in icloud control panel but only can see my photo's stream

Where can I see my camera roll's photos which already backup into the icloud on my win7 pc ? I tried open in icloud control panel but only can see my photo's stream

leonsee94 wrote:
Where can I see my camera roll's photos which already backup into the icloud on my win7 pc ?
You cannot see photos backed up in iCloud on your computer.
Camera Roll photos backed up to iCloud are still in your Camera Roll on your iPhone.
You need to regularly sync the photos to your computer. (then you can see them on your computer).
-> http://support.apple.com/kb/HT1296
then delete them from your Camera Roll.
You can sync the photos you want on your iPhone back to your iPhone using iTunes.
-> http://support.apple.com/kb/HT4236

I have photos on a cd which I'm trying to open . If I click on them I can see the picture in the preview, but when I double click it doesn't recognise the picture. They are all in .jpg format. Tried copying them but it said some data cannot be read.

I have photos on a cd which I'm trying to open . If I click on them I can see the picture in the preview, but when I double click it doesn't recognise the picture. They are all in .jpg format. Tried copying them but it said some data cannot be read. The files exist but I just can't seem to view them

Select one and hit the Space bar to view it in QuickLook. Use the forward arrow keys to move from file to file. If the file can't be viewed in the QuickLook mode then the file is damaged and probably can't be copied or moved.
You could try a photo file recovery application like MediaRECOVER which can scan the memory card and tell you what files, if any, can be recovered before you have to purchase it.
OT

I keep losing entire events in iPhoto on my iMac. Where an event was, there is a light gray event box displaying a dark gray palm tree and when I hover my cursor over the box, it shows 0 photos are there, where there were once photos.

I keep losing entire events in iPhoto on my iMac. Where an event was, there is a light gray event box displaying a dark gray palm tree and when I hover my cursor over the box, it shows 0 photos are there, where there were once photos. I am operating a 27 inch iMac running OS X 10.9.4. It has a 2.7 GHz Intel Core i5 processor, and its memory is 4GB 1333 MHz DDR3. Is there any way to retrieve the lost photos?

WHat version if iPhoto? Where is your iPhoto library located?
TRy
BAckup your iPhoto library, depress and hold the option and command keys while launching iPhoto until the first aid window comes up and repair permissions and if necessary rebuild your database
LN
Edit

Why can't I get the same photos and videos I have taken and edited in photos or I photos when I see them in my laptop the photos are unedited in laptop I can see edited photos on in my iPhone not in laptop

Why can't I can see edited photos and videos. On my laptop why only the original version of the photos are maintained

Have you copied those pictures from the iPhone to the computer?
If PhotoStream is enabled on the iPhone and computer, they will sync between all devices with PhotoStream enabled. And if that is the case, are you editing the photos in PhotoStream or in Camera Roll?

I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album.

I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album as a proper image. Besides, I have also experiences the camera working a bit wiered (slow and often blanks out the moment I am ready to take a photo). Any help on this pls?

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

HT5824 i have a few hundered photos on my ilcoud but when i sent up my PC to recieve photo streeming of my photos i only got 89 what can i do to get the rest

I have a few alot of photos on my Icloud but when i set up my PC to recieve photo streaming i only got 89 how do i get the rest to down load

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

How can I delete a file? At the moment I delete each pic and it takes ages! I tried select all and managed to delete all my 2300 photos!! I've got them back but I've also got back 980 which I had already deleted 1 by 1 over the past 6 months! Help!

Please help! How can I delete a file without deleting all my photos? I have just managed to delete all my more than 2000 photographs by choosing' Select all' and then delete. But I thought only 'all' the photographs in the file I had open would be selected! I have got them back, but I've also got back more than 800 others that I'd deleted SINGLY over the last 6 months! HELP!

Put a Photo in the iPhoto Trash.
iPhoto Menu -> Empty Trash
This removes the photo from iPhoto and the Hard Disk (in every version of iPhoto except iPhoto11)
In iPhoto 11 the file goes to the System Trash, you need to empty that too.
Regards
TD

IPhoto won't open due to the not being updated but when I check to upgrade to iPhoto 11 it tells me it is installed. The photos in the library were modified using 9.1.5 and the iPhoto is said to be 7.1.5 (iPhoto 8). Any ideas?

iPhoto won't open due to the not being updated but when I check to upgrade to iPhoto 11 it tells me it is installed. The photos in the library were modified using 9.1.5 and the iPhoto is said to be 7.1.5 (iPhoto 8). Any ideas?

How do you know the library was modified with iPhoto 9 (11)? If you've never had iPhoto 9 on your Mac it could'nt have. It sounds like a damaged library. Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Hello After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

Hello
After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

I found this other thread discussing this topic, no fix, I will revert to 9.1.1 from Time Machine and wait for a new update.
https://discussions.apple.com/thread/3023160?

Running latest Audition CC on Yosemite. Audio track is displaying, I can see the levels as I scrub but NO sound to headphones. WHY?

Hi,
I am Running latest Audition CC on a 2009 MacPro running the latest Yosemite. I can see that the audio Audio track is displaying, I can see the level rise and fall as I scrub but I can hear NO sound to headphones. WHY?
I have checked the MacPro's system preferences and clicked through the Audition settings but I can't see where the output to device ( headphones) might be muted. What am I missing?
Thanks

TexasPengr wrote:
The signal level input registers on system preferences>sound>input source, but no matter what I do, I can't get Garage Band to recognize a signal input.
set it in GB:
http://www.bulletsandbones.com/GB/GBFAQ.html#selectinterface
(Let the page FULLY load. The link to your answer is at the top of your screen)

I can see a photo in Finder but not in iPhotos

Sorry to be a pain, i am sure the answer tothis question is simple, but as a new convert to Apple i am not familiar with the wrinkles.
i can see a photo in some view but not in iphoto.
Finder gives the file name, all details about the camera etc and even say it is in the Library :- Users/rosedayjo/Pictures/MacB iPhoto Library/Originals/2010/Last 12 Months
But of course when i go to the directory to which it refers i cant import this photo from there to reestablish it in the library because it says it is already in the library!.
So,
1. how does a photo seem to be in a library but is not.
2. how to i get to the file to return it into the library,
All help welcome

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Regards
TD

HT4890 who can see my photos on i cloud

who can see my photos on i cloud if i make photo stream???

Your photo stream is not visible on icloud.com. It is only visible in the photo stream album created on your devices when they are signed into the same iCloud account and have photo stream enabled. Also, only photos taken after turn on photo stream are uploaded. Previous photos are not added to your photo stream.

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RA

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.

I never notied that icon before, and I've been using Bridge for 7 years.
Usually, when you have no image previews for raw files, this means that your Camera Raw plug-in is older than your camera. People always come across this problem when they use a new camera with older software.
To be sure, we need to know which camera you are using, and which version of Camera Raw. To save typing this out for the three-thousandth time, please follow this page which I wrote earlier:
http://yphotography.co.uk/articles/get-adobe-camera-raw-acr-open-photos/
This covers the subject, which is by far the most commonly asked question about opening raw files by a country mile.
If everything checks out fine, let us know. If not, give us more information and we may be able to fix this for you.
PS. Please just open one discussion per problem. There are three threads on this now. It makes it difficult to follow.

I have imported my I photo library into Aperture. all the old i photo events are now in the aperture library showing number of photos but when clicked none display. I can see the photos if i run the cursor over the project. Help please.

Similar Messages

Maybe you are looking for