I have InDesign CS 5.5 and my printer does not - can I save it as an older version

I made a document using InDesign 5.5 and sent it as a packaged InDesign file to a printer who cannot open it. Is there a way for me to save it as an older version so I can send it to them?
Thanks

Is there definitely no other solution?  I am having the same problem and I know a pdf is great for print ready documents, but I am an Indesign beginner and need to send a version of my document that my printer can work on.  Will they be able to work on an .idml file?

Similar Messages

  • I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    Thanks for the reply.  I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long.  After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix.  I strongly suggest not to buy this product.

  • I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

    I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

    I'm not clear on exactly what it is you're asking, but if you're referring to changing opacity, you can change the opacity setting for the States of a menu item via the States panel and Control Strip.

  • My iphone 4s will not connect to networks.  the button is greyed out and cannot turn o.  I have reset the network settings and it still does not work - any ideas?

    My iphone 4s will not connect to networks.  the button is greyed out and cannot turn on.  I have reset the network settings and it still does not work - any ideas?

    Thank you I tried the reset again did not fix- I think I am down to calling Apple and paying for a tech - phone company says it is a software problem.  I just updated to 8.1.3  - I thought the update might fix it.

  • HT4623 e while updating iOS. When connected to PC & iTunes get the message in recovery mode, must restore.   I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

    iPad 2 froze while updating iOS 7.0.4.  When connected to PC & iTunes get the message in recovery mode, must restore.   I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

    Sorry if we didn't get to your question fast enough; we are all volunteers doing this in our spare time. Try the steps in this article. If you're unsuccessful, you'll need to take your device to the Genius Bar for an evaluation.
    http://osxdaily.com/2010/12/04/ipad-dfu-mode/

  • Just updated to 8 & now I can't open any web pages & firefox is still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

    Just updated to 8 & now I can not open any web pages as well as firefox will not close out, it still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

    See "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    See "Firefox hangs when you quit it":
    *https://support.mozilla.com/kb/Firefox+hangs
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • My passcode was entered wrong too many times now i have a configue iphone screen and my laptop does not recognise my iphone ... do i have to reconfigure it?

    Please help i don't want to lose all my info and pics from the last week for the 4th time.

    If the computer does not recognize it and you've forgotten the passcode, there is no other option.
    If you've been using the device as designed and syncing regularly, only the data since the last backup will be lost.

  • I have just installed mavericks OS.My epson printer does not want to work with it .What can i do?

    I HAVE JUST INSTALLED MAVERICKS OS.IT APPEARS IT IS NOT COMPATIBLE WITH MY PRINTER WHICH IS AN EPSON WORKFORCE PRO WP-5630 SERIES 2.What can i do about this problem?

    Hello Baldy7,
    It sounds like after updating to Mac OS X 10.9 your printer is no longer working with the computer. U want to recommend these steps from the article named:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Additional Information
    Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB.  For more details, see this article.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I have students whose toolbars "disappear" and global settings does not help.

    As mentioned, I have 2 students that have somehow deleted their toolbars. I've been given 2 solutins so far and neither one has helped.
    I have went into "customize user interface," but it won't let me bring them back. It is only on that student's login and on that particular computer.
    If they use another computer, or another student uses that computer, the toolbars come up. The FAQ didn't help me because; there is no folder titled "electronics workbench"; There is a folder titled National instruments, but there is no folder under it titled "ewb9"; and the only "ewcfg" files I could find were default files, no "ewcfg" files with anyone's user name could be found. I tried going into the global restrictions using the password given, and none of the disable boxes are checked.  I should also calirify that the toolbars do show up, but they are only a small grey square.  You can mov ethem, but you can't "open" them.
    Help

    I have Version 10 and I am not sure this is the same for Version 9, but here is what I know. In version 10 the config giles are contained in the Documents and Setting folder on the main drive. For example mine is located here: C:\Documents and Settings\Owner\Application Data\National Instruments\Circuit Design Suite\10.1\config.
    You might try to look and see if you have something simular on your machine. Once you do find these config files. Just delete them and re-launch Multisim/Ultiboard and the program will rebuild them and restore them back to the original default settings. This should also restore the toolbars. At least this is what I have read in the forums in the past. I have not had any toolbars disappear, so I have not tried this personally. It will do no harm to your install, but may not help with the problem. The only thing to do is give it a try and cross your fingers.
    I hope this helps as I do not have Version 9 and this is about all I can tell you.
    Kittmaster's Component Database
    http://ni.kittmaster.com
    Have a Nice Day

  • I have an i-pad mini and can not synch my music to the i-pad.  I have attached to my PC, and the music does not show as available on the i-pad.  I have selected to synch all with a check mark ... same as i-phone.  i-pad shows no music avaiable.

    I have a new i-pad mini and I can not get music to show as available on the i-pad.  I have tried to download from cloud and also have physically attached the i-pad to my PC.  Have selected to synch checked songs ... just like my i-phone ....  but no music is available on the i-pad.  Trying to use same synch parameters as the i-phone

    How to use multiple iDevices with one computer

  • My apple id has been disabled. I have set a new password and it still does not work. Does anyone know why this would have happened.  About 6 months ago someone hacked my itunes account  so I set a new password.

    My Apple ID has been disabled.  I have set a new password, but it still is saying disabled.  About six months ago my itunes was hacked. Itunes replaced the money, but now I am cannot get in. Is there anyone who might be able to help me out? Thanks

    What did itunes support tell you?
    If you did everything it says then you contacted them.
    From the article you linked:
    If the issue persists, you can visit iCloud Support, iTunes Support, Apple Print Products, or contact AppleCare for further assistance."

  • How to get indesign from iMac to mac powerbook which does not have cd slot?

    how to get indesign from iMac to mac powerbook which does not have cd slot?

    That will not work!
    You cannot copy or migrate Adobe applications from computer to computer. There are a whole host of files in different locations which have to be installed, and copying will not do it.
    In fact, you'll now have to use the Adobe Cleaner tool to remove the mess you created. You can get to it here:
    Use the CC Cleaner Tool to solve installation ... - Adobe

  • My wife and I have 2 new iPhones and also have a mac book pro and an iMac. How can we share apps, music and contacts between all these?

    My wife and I have 2 new iPhones and also have a mac book pro and an iMac. How can we share apps, music and contacts between all these?

    Use the same Apple ID and password for purchasing in all these devices.

  • My APPLE ID is NOT working properly. I am frustrated beyond belief I have tried time and time again to change my apple ID and it keeps reverting back to my original ID!! I even set up a new email to try to submit a new id and it still does not work

    My APPLE ID is NOT working properly. I am frustrated beyond belief I have tried time and time again to change my apple ID and it keeps reverting back to my original ID!! I even set up a new email to try to submit a new id and it still does not work

    To change your Apple ID, follow these steps:
    Go to My Apple ID (appleid.apple.com), click "Manage your Apple ID", and sign in.
    If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you are unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
    In the "Apple ID and Primary Email Address section," click Edit.
    Enter the email address you want to use, then  click Save Changes. Apple will send a verification email to that  address.
    Open the  email  from Apple, then click Verify Now in the email.
    When the My Apple ID page opens, sign in with your renamed Apple ID.
    If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID.
    After you see a message indicating that verification is complete, remember to update all of the stores and services that you use with your  Apple ID.

  • My wi-fi connection is enabled, however Safari is telling me the server stopped responding.  My laptop is working fine on the same wi-fi network.  I have reset the network settings and still Safari will not open any web pages.  Help!

    My wi-fi connection is enabled, however Safari is telling me the server stopped responding.  My laptop is working fine on the same wi-fe network.  I have reset the network settings and still Safari will not open any web pages.  Help!

    Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding".  I am not able to connect with anything on the Internet.  Frustrating since I am able to connect with my laptop.  Thanks for the suggestion.

Maybe you are looking for