I have inserted an image into my form that does not reflect when i save it a a pdf

I have insetred an image into my form that does not reflect when i save it as a pdf - please cna you assist?

Hi leannedatel,
There was a possible answer to this posted previously. Try this thread for a solution:
http://forums.adobe.com/docs/DOC-4144
Cheers!

Similar Messages

  • (ES4) How to create a flowable form that does not overlap when pushed to a new 2nd page

    I have a form that involves text insertion boxes, plain text, and checkboxes.  I successfully made my text insertion boxes a flowing expandable layout, but once it gets too big and it has to push the subforms below it onto a 2nd page, all that information overlaps eachother on the 1st line of the new page like the subforms disappear. How do i get it to flow like the original 1st page? I can post a pic if its confusing, but its so frusturating!

    I have a form that involves text insertion boxes, plain text, and checkboxes.  I successfully made my text insertion boxes a flowing expandable layout, but once it gets too big and it has to push the subforms below it onto a 2nd page, all that information overlaps eachother on the 1st line of the new page like the subforms disappear. How do i get it to flow like the original 1st page? I can post a pic if its confusing, but its so frusturating!

  • How do I insert an image into a Form

    I want to insert an image into a form. This field will change each time I start a new form. I'm creating an invoice for a customer and they want to insert an image of the house they are working on. Each time they start a new job, they need a new invoice, needing a new image. Can the client inset a jpeg that they have on their computer? Please help!!

    If they have a full version of Acrobat, then you could set up a button field from the Forms menu and set it to accept an icon only. They would need to have some knowledge of Acrobat but it could be done.

  • How can I restore a single image from an aperture time machine backup, do I have to restore the entire library? that does not make sense

    I hope there has been found a more efficiant solution for this,  how can I restore a single image from an aperture time machine backup, I really hope I don't have to restore the entire library? that does not make sense
    any suggestions?

    Did you try browsing your backups in the Finder ?  That is, do not go and "Enter Time Machine".  Instead, navigate to your Time Machine backup via Finder and then manually go to the time period (by folder name) you are looking for ... when you find your Aperture library you can then "Show Package Contents" and find the Master you are looking for.

  • Why doesn't the image from my fillable form not appear when I save it as a PDF?

    I created a fillable form and when I save it as a PDF and view my image at the top does not appear. How can I fix this?

    Never mind. Apparently it was just that image.

  • Why won't cells autopopulate when using numbers on the ipad? Anyone have a fix? Have also created a dropdown menu, but that does not translate from excel to numbers either.

    Why won't cells autopopulate when using numbers on the ipad as they will in excel? Anyone have a fix? I have also created a dropdown menu in excel, but that does not translate from excel to numbers either.

    Glad you got it sorted out.
    Diane123456 wrote:
    > Thanks Vix, Joe, and Mad Dog for responding, the site is
    in
    > development so it's behind a password, which I probably
    could share
    > but MD is right, it was a margin issue. I didn't think I
    needed to
    > set a margin but I had to put a left margin of 2em on it
    for the
    > numbers to display on IE7 or IE6
    >
    > This is actually a rather common issue with CSS layouts
    (it is not an
    > issue with designs using tables) - there are several
    posts for ULs
    > which you may be interested in - see
    >
    >
    http://www.adobe.com/cfusion/communityengine/index.cfm?event=showdetails&postId=
    > 1981&productId=1&loc=en_US
    >
    > -- and once I got the numbers to show I ran into the
    same problem as
    > the commenters on the above thread, which noticed that
    the vertical
    > alignment doesn't work well with IE, and which noted
    that apparently
    > IE has a stutter because it just kept repeating "1" "1"
    "1" -- so I
    > finally went with a hanging indent and just put the
    numbers in there
    > manually - fortunately it's not a long list.... if you
    have a fix
    > for the stutter, or know of another place to get help
    with CSS layout
    > browser quirks please share -- if I find another one
    I'll share also
    >
    > thanks again, Diane

  • Itunes does not open,everytime i try it says "The itunes application could not be opened. The required folder cannot be found" I have tried the shift key option but that does not work. help!!

    I cannot open itunes. Everytime i try it says "The itunes application could not be opened.The folder cannot be found." I have tried the shift key option but this does not work. Please help.!!

    Try the actions here for that driver.
    iOS: Device not recognized in iTunes for Windows
    I would first do this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Inserting images into a movie that are not photos

    Is there anyway to insert images into an iMovie (such as *.gif) files? Alternatively, is there anyway to insert powerpoint slides into an iMovie (because I can easily get the images into power point).
    Can I put an image in one of the title frames or transitions?
    Thanks
    Dan

    I am not sure about gif (but you could easily try it). JPEGS (.jpg) work and .png work for sure.
    It is straightforward to save a powerpoint page as a jpeg.

  • This has never been a problem in the past, but when i insert a CD into my macbook, iTunes does not ask me if I want to import it and it ejects the CD.  I have tried several different CD's and can neither play nor import them.

    This has never been a problem before, but when I insert a CD, iTunes does not ask me if i want to import the songs.  It will not play the CD and ejects it.  I have tried several different CDs and cannot import or play any of them.  I can play songs that are already in my library Suecq5

    Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    and PRAM How to Reset NVRAM on your Mac - Apple Support
    If that doesn't help you can try a cleaning disc, or a shot of compressed air but chances are good that your optical drive has failed. You can either replace it or buy an inexpensive external unit (but not Apple's as it won't work on macs with a built in drive working or not).

  • I have lost my contacts on my IPhone5 and have tried to go into ICloud, but it does not accept my Apple password, I have changed the password many times.  What do I do?

    I completed the updates on my IPhone5, now I have lost my Contacts, I tried going into my ICloud, but the password that I use does not work (Apple Password).  I have changed it many many times and it still won't work.  The ICloud is trying to VERIFY, but stays at that point.

    Andrea Z. wrote:
    I have lost my iPhone on August 27, 2013 at 6:15 a.m. when I posizioned it on the strip for the scanner objet of Linate Airport.
    After about 10 minutes when I was already on the plane my friend tried to call my number but the phone was already off.
    By searching with the "Find my iPhone" system, the device is OFFLINE and does not appear on the map.
    I have already written to the lost property office of the Linate Airport but at the moment they do noto have yet responded.
    I have already forwarded the complaint to the police.
    How can I find out it if my iPhone 5 is offline?
    Thanks in advance for the answer.
    Andrea Z.
    29/08/2013

  • Help! I dropped my external HD and now my Macbook Pro will not recognize the drive. I have tried to repair the disk and that does not work. Please offer help, suggestions, something!

    I dropped my external HD on my hard tile floor and now the drive is not working properly. I have tried a repair in Disc Ultilies with First Aid with no such luck. It started to work then I got a message "Filesystem verify or repair failed" about 3-4 minutes into the first aid repair disk. When I plug in I get the disk you inserted was not readable by this computer message. Please I need help on restoring this drive!
    Its a simple tech pro drive 1TB.

    Unfortunately, a drive that has been mechanically damaged by a drop and can't be repaired using Disk Utility probably can't be fixed any other way either. The best you can hope for is to salvage as much data from the drive as possible using one of the data recovery utilities linked below, and then replace the drive.
    http://www.prosofteng.com/products/data_rescue.php
    http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
    http://download.cnet.com/VirtualLab-Data-Recovery/3000-2094_4-10298807.html
    If you can't recover your most important data using one of these utilities, the only remaining hope is a data recovery service, which is very likely to cost $1000 or more for a 1TB drive.

  • Adobe form script changes not reflected when PDF created by ADS.

    Hello Experts,
    We have done some modifications (UI elements java script) in PDF form in the Development system and tested... everything fine and as expected everything working.
    When we move the same changes to Quality system, the expected functionality is not working. For error analysis we followed below things.
    --1. I have checked the PDF form in SFP TCode is newly added script code is available or not.... Is available in Quality system.
    --2. I have run the application In SAP Portal, where we show this adobe form and saved locally generated PDF form by application. Then we imported  same saved PDF form into ALD  and checked... is newly written java script is available or not....strange is not available...... but in ECC under  SFP TCode i am able to see the newly written script code.
    --3. o.k. we feel that some issue with ADS server so avoid that we restarted the server even though same.... the newly written script PDF form is not picked  by ADS server while generating the PDF in the portal application.
    Can some one throw some torch on this issue?
    Regards
    Malli
    Edited by: mallikarjuna pasupulati on Apr 7, 2011 9:03 AM

    Steve,
    Might M. Kazlow's announcement be relevant?
    Announcement: Mac OS X.7 Lion Compatibility and Acrobat X
    Mac OS X.7 is not fully compatible with Acrobat X.
    Please see http://kb2.adobe.com/cps/905/cpsid_90508.html for more details.
    by MichaelKazlow at Jul 20, 2011 1:17 PM
    Be well...

  • Form button does not work when a program is moved from Windows 8.2 to Windows 7

    Hi,
    I have a few Excel programs which use the ODBC to get data from Access and which have macros which writes data to an external program, MYOB.
    When the macros tries to write the data to MYOB it fails if I am not running the program in administrator mode.   It seems that Windows 8.2 has a different level of security than Windows 7 and must be run in administrator mode for the ODBC to work. 
    I have had issues after running the program in administrator mode (testing) if I simply do a save (in administrator mode) and then send it to the customer.   The issue is that it just will not work on the customer's site.   I have gotten
    around this in the past by saving any changes, going back out of excel, loading the program again (not in administrator mode) and saving it - before sending it to the customer.   This worked until now.
    For some unknown reason, the last time I sent a program to the customer and carried out the above process, the program stopped working.   Originally I thought that the macro just wouldn't work on windows 7, but eventually found that it is the form button
    that will no longer work when the program is moved from 8.2 to 7.
    Does anyone know why there is an incompatibility between 8.2 and Windows 7 and what I should be doing to ensure that my programs work in my customers environment(windows7)?
    In the meanwhile, I have changed the form button to an activex button and the program works fine in both environments.
    Thanking you in advance,

    there is some OP report after Windows update Dec 2014 macro stop responding ( I cant confirm if this is also related to your issue) its because security update for Office maybe conflict with the active-x that you are installed
    try to
    Close Excel
    Start Windows Explorer.
    Select your system drive (usually C:)
    Use the Search box to search for *.exd
    Delete all the files it finds.
    Start Excel again
    Open that file and save it, and try open at Windows 7
    to get more detail about this issue, I suggest also contact Office forum
    this case also will be solve installing kb3025036
    good luck

  • Forms applet does not load when request forwarded from custom servlet

    I have an existing forms app that I wish to call from a newly-developed servlet. The servlet determines which form to call and then forwards the request to the forms servlet using RequestDispatcher.forward().
    The request is forwarded correctly but when it is done all I see is a blank browser (IE7) window. When I View Source I see all the correct HTML code (from basejpi.htm) but it seems my browser does not attempt to load the forms applet. No messages are displayed in the Java Console. This is the same HTML that comes back if I run the forms app directly, e.g. click a link that goes straight to the forms servlet URL, only in that case the forms app starts up fine.
    Anyone know why this does not work?

    Figured out what is going on:
    In basejpi.htm there is "<SCRIPT LANGUAGE=JavaScript SRC=java/forms_ie.js>" that creates an OBJECT tag to load the forms applet. I believe since the context of my custom servlet is different than that of the forms servlet, forms_ie.js is not found when the request is forwarded from my servlet.
    One question answered raises another. There is also an OBJECT tag inside a NOSCRIPT tag for machines where scripting has been disabled:
    <!-- Forms applet definition (start) -->
    <NOSCRIPT>
    <OBJECT name=FormsApplet
    type="application/x-java-applet"
    ...>
    </NOSCRIPT>
    <SCRIPT LANGUAGE="JavaScript" SRC="java/forms_ie.js"></SCRIPT>
    My thinking is to remove the NOSCRIPT tag, and also the SCRIPT tag mentioned above, so all machines will simply see the OBJECT tag, like so:
    <!-- Forms applet definition (start) -->
    <OBJECT name=FormsApplet
    type="application/x-java-applet"
    ...>
    This makes me wonder why the SCRIPT option is there to begin with. Anyone see a downside to this approach?
    Kevin

  • How to make a button on a form that will not appear when printed?

    Hello again!
    I have a rather strange request that I got recently from my employeer regarding a form that we are currently working on:
    We have a form with a Acrobat created button on it that links to an attachment.  She does not want the button to appear when the document is printed.
    Is this even possible??
    Thanks in advance!
    Best Regards,
    Ashley

    You can set the form field to be "Visible but doesn't print" rather than "Visible". This is far easier than the scripting solution.

Maybe you are looking for