I have installed airport express and it lights steady green. But when I use the airport tool, nothing can be found.
I have installed airport express on my Window 7 and had problem to find the airport express.
I solved the problem by turning off my AVG firewall and the airport tool found the airport express and it went steady green.
I then turned on the AVG firewall again and it continues ok.
But when I turn off and restarted my laptop I have to follow the same procedure.
The AVG firewall is set to All Allowed for the airport express.
Is there anybody out there that can give assistance to solve this problem?
Hi,
I solved the problem myself by updating the Wi-fi driver.
Now it works perfect.
Similar Messages
-
I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.
The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
Temporarily disable wireless encryption.
If you are hidding the SSID, disable that feature.
Change the Mode Select setting to: 802.11g Only
Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11 -
I have Photoshop CS5 Extended and it says updates available but when i download the updates it says updates failed please try again later, i have tried a few times and get the same message any help would be great i am running 64bit on windows 8.
I am running Windows 7 64 bit ultimate and have the same problem. My hard drive crashed, installed a new one and then reinstalled CS5 extended. Installation went fine, but can no longer open my camera RAW files from Photoshop (camera is a Canon EOS T2i. The message also tells me I am not eligible for the update. I am... and I cannot open my files and I could before. I can find nowhere to contact Adobe to tell me how to proceed. My daughter is all a registered user of the same product and she had no problems upgrading... we purchased ours each at the same time. I do know the difference is that I had to reinstall and she did not. If that means anything.
-
I do not need another wireless network but want to use the airport express for printer access only. Can this be done and how?
You can configure the AirPort Expess to "Join a wireless network" and enable the Ethernet port so that Ethernet devices will be able to connect.
In order to print from the iOS devices, you will need to have an application like Printopia installed on your Mac. The Mac must be active when you want to print.
More details here: Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
There is a free trial available for Printopia, so make sure that it will work before you buy the AirPort Express. -
I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?
Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?
-
I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.
You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.
-
Hey guys i was wondering if i could downgrade my iphone 5 from ios 7.1.1 to 7.0.6 or .0.4 i have 7.0.6 and .0.4 shsh blobs but when i try to build a custom ipsw using ifaith it loads and never stop loading is there any way to downgrade to older ios 7 ?
No, you cannot downgrade your iOS device. That's not supported by Apple.
-
When I use the type tool or the selection tools, my photos blink between the photo and a black screen. Anyone else have this issue?
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
-
When I use the "snapshot tool" some images are very light. how can I adjust the brightness....
I have windows 7 and Acrobat X Pro.
When I use the snapshot tool I cannot figure out how to adjust the brightness on that image? On my old computer a picture tollbar would pop up. A lot of images are very light and I need to darken them.My not be much you can do. However, I would just clip them into my favorite image tool (in my case IrfanView) and adjust there.
-
Illustrator (CS6, Creative Cloud) crashes when I use the move tool. No help here in the forums that I can see.
As far as I'm concerned this is a ridiculous problem that is so basic - it should not happen for the price Adobe charges.
Completely ruins workflow.
Please help.Emily,
Just to make sure, are all the faces of the Verdana and Tahoma fonts installed and enabled/activated through the OS (not font mangement) as TTF (not OTF)? -
When I use the selection tool to move vector points and bend edges, I only see the change in wire frame. Once I commit by letting go of the mouse button, the object does change. It just previews with a wire frame. I would like to see the preview change on the solid object. Is there a setting somewhere?
I sure hope I am explaining this for people to understand .
Thanks
EdHi Ed,
What do you mean by wire frame??And are you using selection or sub-selection tool since you have mentioned about vector point I doubt if it is sub-selection tool.Could you please attach a video demonstrating the issue where we see the mismatch in the preview and the output, so that we can understand the problem better and try to resolve it.
Thanks,
Sangeeta -
just buy my macbook last week, and the problem is i cannot start my macbook and is making are beep beep sound. And is become warm. But when I connect to a charger is can start like normally. What I'm need to do so? Thank You.
Since you are covered by warranty, I would take it to your nearest Apple store immediately. There might be a problem with the RAM. And, you have 14 days to return the machine, so if it is not an easy fix, you might want to consider returning it for another machine.
-
I have a site published that i need to change, but when i publish the new pages it dosen't change the old site.
See if this helps you any further :
The concept of Sites in iWeb
Also, clear the browser cache and reload the page(s). -
Hello,
When I use the pattern tool via the window which is here : object / patter / create --> and I choose in the mosaic style by brick columns I have this result : http://bit.ly/1nozEl3
I don't understand why do I have those lines ? thanks for helping.Hello Jacob,
Thanks for responding.
Yes, it's seems to be a screen artifact, when I zoom they seem to move or disappear but they're still here.
With SVG, it's the same.
When I untick Anti-aliased Artwork, the artifact disappear, but my designs change, no more precision ! Have a look here : http://bit.ly/UyGoVe
Any other solution ?
Thanks -
how do you get your old scores on your games when you transfer the games between devices ive signed into game center and my scores are there but when I open the games Im at 0 again
Did you do this?
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
Maybe you are looking for
-
How do i create a new category in iBooks
When I select the Categories view in iBooks for Mac OS X I can see several categories listed in the left pane of the window. How do I create a new category, and how do I move a PDF file into the new category, or any existing category?
-
I have one movie that will not sync to my iphone, I get error message that says that file can not be read or written to. My other movies and what not sync fine. is there a problem with movie file? Any suggestions
-
BT Broadbands awful set up service
Hello, I have a problem both with my broadband and my phoneline so am unsure where to post, but the issues have arisen out of signing up to BT Broadband. I asked to be switched to BT Broadband in the middle of August, and was told that my switchover
-
MOV 68A and 68E (intra company) duplicate freight cost
Hello, We are currently in version 702 with EP5.0. We activate BF LOG_MM_SIT and we are using scenario N6 for intra company process and N3 for inter. Process: We add a freight cost in the Intra PO header to be charged to a third party (intra company
-
I have a parser program which queries a online shopping comparison web page and extracts the information needed. I am trying to run this program with different search terms which are created by entering a sentence, so each one is sent separately, how