I have installed an evaluation version of lightroom 5.6 64 bits on my Pc windows 7 64 bits sp1. Technical capacities are Ok. When I try to run lightroom I Read tue following message "lightroom exe. application failure 0xc000007b". Thanks for your help
I have installed an evaluation version of lightroom 5.6;64 bits on my windows 7 64 bits pc sp1. Tecnical capacities of my pc are ok. When I Try to run lightroom i read the following message :"lightroom exe. application failure 0x000007b" Thanks for your help. Pasc39
I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.
Similar Messages
-
Hi few days ago I bought a second hand iphone 5 white 64 gb, and when I try to activate it I see the following message: "This iPhone can not be activated for service.please contact your carrier or AppleCare"
So then do what it says...contact Apple or your wireless carrier.
However your phone is probably locked to another carrier and cannot be used on yours. -
I have purchased the Adobe program that allows you to convert PDF documents but I can't figure out how to convert the PDF to a Word document. Does anyone know how the do this?
Thanks.
AndrewWhich of these things did you buy?
- ExportPDF
- PDF Pack
- Acrobat Standard
- Acrobat Pro
- Acrobat Plus -
When I make a video with my iPad, is it sent to the Cloud? Thanks for your help!
When I make a video with my iPad, is it automatically sent to the Cloud? Thanks for your help!
Welcome to the Apple Community.
No, it's not automatically sent to iCloud.
What do you mean by 'make a video', what are you trying to do. -
I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?
try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
When I try to run iTunes I receive the following error message: "Apple Application Support was not found. Apple Application Support is required to run iTunes helper. Please unistall iTunes, then install iTunes again". I have done this twice and continue to get the error message. What now?
Hi texasslagle,
It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
There is an article that you may want to use to try to complete your install here -
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Thanks for using Apple Support Communities.
Best,
Brett L -
Somehow my application icon in the dock has disappeared. I have no idea where it went but it contains all my applications that i use. How do I get the application icon to return to the dock. Thanks for your help. I am not computer literate by any means. Thanks
Goto your application folder, find your app then drag/drop it back to the dock.
-
Hi, I have an iPhone 1 that is blocked (because of wrong passwords) and isn't recognized by iTunes. How do I fix this? Thanks for your help!
By the way I'm using a MacMini and all operating systems are up to date including iTunes.First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download -
When I try to open ITUNES I get the following messages: Runtime Error R6034 - "An application has made an attempt to load the C runtime library incorrectly" . I have 15,000 songs in my library. Will I lose them if I uninstall as suggested by Apple??
Exactly the same problem. But it gets worse. iTunes has now disappeared from my list of installed programs so I can't uninstall anyway. Appalling problem. This update clearly didn't get proper testing before release.
In answer to your question about your song library, I seem to remember uninstalling and reinstalling iTunes a few years ago and the uninstall didn't remove the library then - I can't see why it would. Of course there have been a lot of updates since then, so it is definitely worth asking the question. Personally, I would be inclined to make a copy (if you have the space) of the iTunes folder just to be sure.
I certainly hope they get this fixed soon. I use iTunes mainly for podcasts on my iPod and I can't download anything right now. -
In mail, my attachments, both photos and documents, appear in the body of the message. How can I get my attachments to appear as a separate attachment and not as part of the main message???? Thanks for your help, Karen.
softwater wrote:
...and costs $14.99
Yep! And if you absolutely need (or think you need) that functionality, it is worth every penny.
As Don already pointed out, exactly what the recipient sees will depend on how they've set up their machine and what unnecessary 3rd party apps they might've installed to display attachments the way they want.
In theory, that is true. In practice, Attachment Tamer will cause more of your messages to show up as plain-jane icons on the other end. The problem is, after all, people running Outlook 2003 and 2007. These people likely aren't doing many system modifications.
If I were you, I'd use the free solutions provided above, save my money and let my recipients decide how they will handle their mail.
I completely agree. -
Does anyone know what the latest Photoshop Elements version is that will run on Windows Millenium? Thanks for your help!
PSE 2, I think. I know that's the last one with ME listed in the sys reqs. PSE 3 might have worked, but adobe never said it would.
-
Hi there.......I have a Mini...1.33GHz Power PC G4..memory=512MB and OS=10.4.11. I'm wondering whether I would be able to upgrade the OS to 10.5? Thanks for your help.
Yes, you can. You may want to install more RAM first.
(62045) -
I have forgotten my "restrictions code" passcode. How can I get a new passcode? Thanks for your help. Paul
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
Hello,
I had to re-initialized my iTouch (ios5.0.1) and since then I have no longer got the contacts symbol. However my contacts are still there when I want to send a email for instance, but I can't add any like before when this app was in.
Thanks for your help
BrunoSorry, but I don't know of any other way. Perhaps you can leave feedback to Apple on this.
http://www.apple.com/feedback/ipodtouch.html
B-rock -
All of a sudden I am getting a background picture of angry birds in my e mail. I can view the mail but it is annoying.
I have cleard the history an still it appears. Any ideas on how to get rid of this garbage? Thanks for your help.Bettina:
Do you see the color in Designer, or only Acrobat. If it's only in Acrobat, try changing the menu item Forms >> Highlight Fields. This toggles entry field highlights on and off.
Mark
You can shut off or change the highlight with this
app.runtimeHighlightColor = color.red;
if (app.runtimeHighlight)
app.runtimeHighlight = false;
Maybe you are looking for
-
The process gets to the NIVISA\SETUP.INI step, then I get this error. I've tried with installing the MDAC and not, and it happens both times. The drive I'm trying to create the file to has 7.4GB open on it, so I'm not sure why this is happening. Than
-
Hi, How to create sale tax paid gl account with open item management or without open item management? Thx & Rgds Ravi Moderator: Please, avoid asking basic questions
-
IPod battery problem I think?!?
When I plug my iPod in with a Firewire cable into my G4 it comes on and can play songs etc. As soon as I eject and then take the cable out of the iPod it switches off and won't come back on until I plug the Firewire cable back in. I have tried resett
-
Need help sending e-mail a mobile messages
hi! i'm a n00b in Java. Can you please tell how can i send e-mail and mobile messages in java? thnx!!
-
XML parser in JServlet cartridge [OAS 4.0.8.1]
i'm deploying XML-aware servlets on Oracle Application Server 4.0.8.1 using JServlet cartridge. I wondered if anyone did this before, especially in the light of rather crippled JVM of OAS [JDK1.1.6 only]. any input would be appreciated. thanks, alan