I have installed an Windows Partition, and now my keyboard won`t run and it only starts Windows

I have installed Windows with boot camp, now my MacBookAir starts only with Windows and the keyboard and the trackpay don`t work
Please i need some HELP

Have you installed the support drivers that Bob mentioned above?
If you used a USB to install Windows (I take it you're on Windows 7) and it's at least 8GB download the support drivers to the same USB then boot in to Windows with the USB plugged in and the automatic install process should start. Maybe

Similar Messages

HT1338 I have updated my Imac to Mavericks and now my parallells won't work and I have reinstalled as per the instructions. Please help as all my data is on a hardrive that is formatted for PC

I have updated my Imac to Mavericks and now my parallells won't work and I have reinstalled as per the instructions. Please help as all my data is on a hardrive that is formatted for PC.

Yes I just discovered that this morning but I have purchased another external harddrive and formatted it for both and am in the process of transferring the files across it and then I will erase the old harddrive and reformat it so I can use it.
I have learnt to format harddrives from this experience but am happy to see the back of parallells.
Thank you for your help though it is much appreciated.

I had to change my payment information on my apple account and now my purchase won't download and my payment information won't save in i tunes...what do I do? I have an ipad 2

I had to change my payment information on my apple account and now my purchase won't download and my payment information won't save in i tunes...what do I do? I have an ipad 2

What id shows in Settings > iTunes & App Store ? If it's the old one then tap on it and log out of it and then log in with the updated version

I have a MackBook Pro I updated to Maverick and now my internet won't work and all my programs freeze and I have to restart my computer.

I have a MackBook Pro I updated to Maverick and now my internet won't open and all my programs freeze and I have to restart my computer. The only program that doesn't freeze is Microsoft Word.

Back up your documents and everything else important to you, not that there is any reason to believe your hard disk may be failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

I accidentally turned off bluetooth and now my keyboard won't connect. I already tried to reboot the computer. I can't use the mouse because I ca't get past the user log-in screen. Please help

I accidentally turned off bluetooth and now my keyboard won't connect. I already tried to reboot the computer. I can't use the mouse because I ca't get past the user log-in screen. Please help

http://www.cultofmac.com/247979/whoops-reconnect-your-bluetooth-keyboard-and-mac -after-logging-out-os-x-tips/
had the same problem and it worked!

I just installed ios 8 update and now my email won't open and I can't receive calls. All of my apps have been updated. How can I fix this?

I have an iphone 5 and I just installed the latest ios update and now I can't open my email app and I can't receive calls. All of my apps have been updated. How can I fix this?

Try a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. If it still isn't working, then restore the phone.

I upgraded to Lion and now my iPhoto won't open and I don't know where my pictures are

I upgraded to Lion and now i don't have Iphoto anymore. Where did all of my pictures go??

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

I got the iphone iOS 7.1.1 update and now my music won't play and I can't download apps. Can I fix it?

When i got the update at first the music would play while my headphones were in. I restored my iphone and now it won't play at all. I have tried to go in the settings for itunes and app store but it also won't load.

Hi Jackson,
Since you have already done a restore of your iPhone, I would suggest that you now try restoring your iPhone to factory settings, set it up again and test before you restore your content. This article describes the process -
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Note - It is important that you follow this stop:
Use iTunes to back up your device and transfer and sync any additional content to your computer.
Thanks for using Apple Support Communities.
Best,
Brett L

I have installed adobe acrobat XI pro, now when i want to run it, i give in the serial number, but they keep saying " we are unable to validate this serial number for Acrobat XI Pro. please contact customer support."

how can i run the adobe acrobat?

Contact Adobe Customer Care - click on the Still need help? button to chat or talk with an agent (phone support is only available Mon-Fri during US daytime).

Just upgraded to leopard and now new keyboard won't work

I just upgraded my system to Leopard, and everything went smoothly. When I installed I had my old keyboard attached as I didn't want anything to got wrong. Now since trying to use the new white key Mac keyboard that is out now, it won't work. I tried to go into preferences under keyboard and mouse but there was no choice there to change keyboard. What can I do?

Apple's download search function is pretty messed so that may not be the right file. The one that Software Update offered for my MacBook Pro when I had the Al board attached is "Aluminum Keyboard Firmware Update" and is v1.0. It was in my Utilities folder.
I had to Google to find the other link, but it's here:
http://support.apple.com/downloads/AluminumKeyboard_Firmware_Update_10
See if that helps. It looks like this and Leo go together, so could explain why you the board doesn't like the change.

I updated the Reader on my Mac OS 10.8.5, and now my .pdfs won't open. I only get a little popup in Chinese.

Please help.
I was prompted to update Adobe Reader when trying to open an interactive document on a government site.
Since updating it, I cannot seem to access any .pdfs online.
Very frustrating.

There were several similar topics recently, where a Japanese message pops up when trying to view online PDFs.
But yours is Chinese; can you post a screenshot of that message: https://forums.adobe.com/thread/1070933

HT4818 I want to have an exFAT parition in addition to the Mac OS X and Windows partition. If I create it before running BootCamp, it wants me to delete it. If I create it in either Windows or Mac OS X afterwards, I can no longer dual boot.

I want to have an exFAT parition in addition to the Mac OS X and Windows partition. If I create it before running BootCamp, BootCamp wants me to delete it before continuing. If I create it in either Windows or Mac OS X after running BootCamp and installing both OSes, I can no longer dual boot. What is the magic sequence to get this to work?

I've got the same quandary.
After upgrading my hard drive to a Momentus XT Hybrid and doing a clean install of Mountain Lion, I was surprised that I couldn't format partitions separately and then restore from my clone of the old Windows 7 Partition. I found that I had to use the BootCamp Assistant to manage it all, which essentially meant getting rid of the partitions and starting again...
I now can't get my Windows / BootCamp partition to boot, after adding a 3rd, ExFat, partition, when it was working perfectly fine before. I just get a lot of dos booting failures and a final message that "No boot device is available, press Enter to continue".
See the attached message, that I get when trying to boot the bootcamp partition, through Parallels 7; which also worked perfectly fine before.
Be good to know if there is a work around this in Mountain Lion as, if not, I'm thinking I might skip Bootcamp altogether and just install a machine drive via Parallels. As suggested here:
http://forums.macrumors.com/showthread.php?t=1420754
I might even keep the virtual windows machine on a separate hard drive and then I'll have no need for the ExFat partitions altogether as that was designated for sharing between Windows and Mac.

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Paragraphs help the reader, just saying.
What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
It makes no difference at all.
How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
You can export while writing the metadata to the file in most cases.
Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size.
HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
You're somewhat confused and you need to
1. Decide what exactly you want to do
2. Then go about it.
If I understand you correctly - and there's no guarantee that I do - the easiest thing is to bring all your Photos into iPhoto and do everything from there.
You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
Regards
TD

I have Acrobat pro on an old pc with windows 7, and now want to download it on a new pc with windows 8. i found the serial number, but I don't know how to download it.

I have Acrobat pro on an old pc with windows 7, and now want to download it on a new pc with windows 8. i found the serial number, but I don't know how to download it.

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I use to have a cc membership which I discontinued and I reinstalled cs6 and now I can not open cs6 without the renew subscription window poping up. How can I still use cs6?

I use to have a cc membership which I discontinued and I reinstalled cs6 and now I can not open cs6 without the renew subscription window poping up. How can I still use cs6?

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

I have installed an Windows Partition, and now my keyboard won`t run and it only starts Windows

Similar Messages

Maybe you are looking for