I have installed bootcamp and thereafter parallels, I now need to reduce disksize of bootcamp partition. Q is how?

I now need to reduce disksize of bootcamp partition. Q is how?
Parallels does not allow this function as I have checked with them

I don't know of any way to do that without removing it completely, using the Boot Camp Assostant program again, or maybe by using some third party software. But I have no idea what that third paerty software is.
Simply fact is once you create a BCA partition you really can't change it or your OS X partition and expect the Windows side to still work.

Similar Messages

  • HT4818 I have installed bootcamp that worked properly.  Then I have partitioned the OS X 10.8.2 and installed another OS X 10.8.2 and I have got two MAC boot options and Bootcamp disappeared from the Option menu. How can I boot Windows again and keep both

    I have installed bootcamp by the bootcamp assistant and worked properly.
     Then I have partitioned the OS X 10.8.2 and installed another Mountain Lion System and I have got two MAC boot options and Bootcamp disappeared from the Option menu. However, Bootcamp still remained in the Startup Disk in the System Preferences. When I tried to boot Bootcamp using the Startup Disk it did not boot and received a message that there is no bootable device. I have not lost any data and can read Bootcamp partition from both OS X systems. Please advise how can I boot Windows / Bootcamp again? Thank you. 

    Recommendation 1: Use a VM for this. It's essentially a giant C.F. to do this with native booting, and is potentially fragile.
    But if you're going to ignore that and do this anyway, realizing that it can break anytime in particular with OS upgrades, and that it's very difficult to impossible to resize the three volumes once you've installed the systems:
    1. create three partitions, setting each to be the size for OS X copy 1, copy 2, and Windows respectively. The Windows partition needs to be set to MS-DOS format (actually FAT32) which later in the Windows installer you'll reformat as NTFS. Do not use Boot Camp Assistant to resize/partition the disk, it simply won't work for this use case.
    2. install OS X copy 1
    3. install OS X copy 3
    4. Use gdisk (available at sourceforge) which is a command line only application, to create a new hybrid MBR adding only the last partition (Windows) to the hybrid MBR and setting it to be bootable. As a concequence you will not be able to see/share either OS X volume from within Windows. The Windows NTFS volume will be visible from within OS X.
    5. Install Windows to the only partition its installer should see (confirm size), you'll need to format it NTFS first, and I suggest using the fast format option if available.

  • I have a Bootcamp partition on  my Imac with Mavericks which I can't delete because the Partition Layout is greyed out and is stuck on 'Current'. What can I do?

    I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout in Disk Utility is greyed out and is stuck on 'Current'. What can I do? I was trying to install Windows 8.1 but apparently, this is not yet possible.
    I was originally able to restore to my original Mac OSX partition using Boot Camp Assistant but then after entering Disk Utility and re-RAIDing the default RAID 1 to RAID 0 in the BootCamp partition (I suspect this is the cause of the problem but why was it defaulted to RAID 1 in the first place?!!!!), forever afterwards, I couldn't restore the single OSX partition.
    Whenever I used BootCamp Assistant my choice to 'Install or remove Windows 7 or later version' was greyed out. Finally I went to Disk Utility to repartition but the Macintosh HD and BootCamp disk partition functions were also greyed out (even if I started up from Recovery mode holding down option, command and 'R' and choosing Disk Utility). BootCamp Assistant gives the error message 'The startup disk cannot be partitioned or restored to a single partition' with additional small script 'The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows', and DU gives the error message 'The full size of the Fusion drive is not available for repartitioning'.
    What can I do to fix this problem? How can I make the Partition Layout button active in DU so I can change the partition to all OSX? I'm prepared to wipe off all my data etc to repartition and have backed up all to disk using Time Machine.

    My problem is fixed now, thank you. It was caused by my changing the Boot Camp partition's 'RAID1' to 'RAID0'. If I hadn't done that, Boot Camp would still have been able to 'restore' back to the one partition. It was fixed with the help of Applecare by using a terminal and typing a command to erase the IP of the Macintosh disk (not the volume) as well as the IP of the Bootcamp partition (if I remember correctly), but then I had to restore the OS and all my applications and data etc which I had previously backed up using Time Machine. I haven't taken note of the exact command terminology used. It would be wise to speak to Applecare about this if possible.
    Two words of warning, 1. According to the cause of this problem, it might be wise, after reinstalling the ops system to reinstall all extra applications one by one, manually, in case a similar problem arises again. Then manually copy back all data. Or the Mac user could use the Time Machine backup and then uninstall all the added apps then re-install them one by one manually. 2. Beware as after all this the user might not have the 'Recovery partition'. There is a small recovery partition (a few 100 Mb is size) which comes with all later Macs. After all this is done this tiny partition might not be there anymore and the user might have to re-install Mavericks again to get it back, or just install the upcoming update of Mavericks due in a month or so.

  • HT1766 I have installed Proloquo2Go and need to know if everything I put into a new folder in this app will be saved automatically or how do I do this and not lose photos and folders?

    I have installed Proloquo2Go and need to know if everything I put into a new folder in this app will be saved automatically or how do I do this and not lose photos and folders?

    Hello dancetoday07, 
    Let's see if we can square this away for you. With backing up your iPhone, it will back everything you have using iTunes and if you use iCloud, by default, backs up everything. After you have made a backup you can restore that to put the contents of the backup on your replacement iPhone. If you want to put certain things back on, you will at least need to export the content to your computer, like your photos and videos. If you only want to put certain things back on, then you will need to sync that over with iTunes. All the information you will need are in the articles below. 
    How to back up your devices using iCloud or iTunes
    https://support.apple.com/en-us/HT203977
    Restore your device from an iCloud or iTunes backup
    https://support.apple.com/en-us/HT204184
    Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC
    https://support.apple.com/en-us/HT201302
    Sync your iPhone, iPad, and iPod with iTunes using USB
    https://support.apple.com/en-us/HT201253
    Regards,
    -Norm G. 

  • When i plug in my new ipad, in my windows 7 computer. It tells me to remove Itunes and install the 64-bit version. but it is the 64 bit. version i have installed. i tried it 3 times now. I downloadet from the Apple support site, with 64bit.?? help

    When i plug in my new ipad, in my windows 7 computer. It tells me to remove Itunes and install the 64-bit version. but it is the 64 bit. version i have installed. i tried it 3 times now. I downloadet from the Apple support site, with 64bit.?? help

    did you solve this problem?

  • I have installed Lion and have problems to print PDF from prewiev.

    I have installed Lion and have problems to print PDF from prewiev. When trying to print Prewiev locks. Anyone out there with the same problem?

    Hello David and Nicole
    I just installed Lion on my iMac, which was purchased in 2007, and I cannot print from Preview; it keeps locking up and not responding. So, I have to force quit Preview. I have been sending error reports to Apple. I suggest everyone who has this problem, send error reports!
    I can print from other applications, like Pages, with my Canon Laserjet. I do not think it is a printer issue becasue I can print in other application.
    I took your advice and installed Adobe reader. Now I can print pdf's.
    Thanks
    Ed

  • I'm using windows 7 and working in office 2010. I have installed iCloud and I can't print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.

    I’m using windows 7 and working in office 2010. I have installed iCloud and I can’t print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.
    Geoff

    I had a similiar problem, with my multiple devices.  I open iTunes and when all devices were connected I went to the info section on each device.  Under info I checked the sync calandars. Under that I click all calanders. I then did the apply in low right. I then did the sync function and it fixed it for me.  You have to do this for each device.
    I also checked the device (ipad,Iphone) themselves and change the calander selection to NO Catagory.  Hope this helps.

  • Since installing Yosemite and Photos I can now no longer drag and drop a photo in an email, as I have always done. I repaired permission and restarted a number of times. still not working... Help?! Thanks, Michael

    Since installing Yosemite and Photos I can now no longer drag and drop a photo in an email, as I have always done. I repaired permission and restarted a number of times. still not working... Help?! Thanks, Michael

    What happens if you use the Share button and select Mail?
    What happens when you try? I had to hold there photo there for a short period before it would load.

  • I have installed Lion and the Front Row application desapered!  How do I get it back

    I have installed Lion and the Front Row application desapered!  How do I get it back

    denisefromgreen valley wrote:
    I have installed Lion and the Front Row application desapered!  How do I get it back
    You don't.  Apple no longer ships Front Row... it's part of the OS... so it goes away when you upgraded.

  • HT4623 i have installed ios7 and when 'i agree to terms' etc, with sub menu....nothing happens. please tell me if i have missed something

    i have installed ios7 and when 'i agree to terms' etc, with sub menu....nothing happens. please tell me if i have missed something

    By the way, the safari setting is: private browsing off and accept cookies from visited. Much help is appreciated!

  • Is my iMac now useless as i have installed lion and i am no longer able to run cs2 photoshop and illustrator as this is all i use my mac for they should make this clear before buying it i can't afford the latest version of cs2

    is my iMac now useless as i have installed lion and i am no longer able to run cs2 photoshop and illustrator as this is all i use my mac for they should make this clear before buying it i can't afford the latest version of cs2 and cant believe what a waste of money it is.

    The newest version of CS2 is CS5. And it was made very clear that these applications would not run in Lion. Not only by Apple, but on all sorts of communities and websites. It has been a long time coming - PowerPC apps were outdated six years ago. Lion does not support Rosetta, and therefore not PPC apps.
    you have to options. Go back to Snow Leopard or upgrade your software. (MS Office 2004 and older will not run either).
    Cheers

  • HT1338 For the past 2 weeks I have not been able to open any small video on the yahoo page or face book. I get  Blocked Plug In. I have installed Adobe and that still does not work. Help.

    For the past 2 weeks I have not been able to open any small video on facebook or on the yahoo page . I have installed Adobe and it still dies not work. Help.

    Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
    See "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    See "Firefox hangs when you quit it":
    *https://support.mozilla.org/kb/Firefox+hangs

  • Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution

    Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution?? please...

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • I have installed itunes and my internet is working however it says I am not connected to internet\

    I have installed itunes and my internet is working however it says I am not connected to internet\

    Hi there,
    You may want to take a look at the troubleshooting steps found in the article below.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    -Griff W.

  • I have an active subscription but everytime I open the program it says trial expired.  I have installed, reinstalled, and installed again.  I have also installed the windows registry patch.

    I have an active subscription but everytime I open the program it says trial expired.  I have installed, reinstalled, and installed again.  I have also installed the windows registry patch.
    It wouldn't install for nearly 5 times I tried to do this.  Now it's finally installed again but it won't budge past the trial version.  I click BUY NOW but then it says "error you already have a subscription" then it times out and just stays on the Trial Expired page.

    Hey kushlar,
    Please log out from your Adobe application and login again.
    Once you launch Acrobat and get error saying trial expired, you will find an option saying 'license this software'.
    Select this option and enter your credentials.
    Now check and let me know.
    Regards,
    Anubha

Maybe you are looking for