I have installed Final Cut Studio 3 on my laptop. I want to sell it, how do I transfer ownership?

I have installed Final Cut Studio 3 on my laptop. I want to sell it, how do I transfer ownership?

Ownership of what? The laptop, Final Cut Studio, or both? If you mean FCS, either with the laptop or separately, you need to give the purchaser (this from the End User License) "all of the Apple Software, including all its component parts, original media, printed materials and this License".  You don't need to transfer ownership of the laptop, per se, though if you have AppleCare on it you should transfer that coverage to the new owner of the laptop.
Regards.

Similar Messages

  • I have an academic version of Final Cut Studio on my laptop and recently purchased the most recent Full version of Final Cut Studio. Do I need to uninstall the academic version before installing the new version?

    I have an academic version of Final Cut Studio on my laptop and recently purchased the most recent Full version of Final Cut Studio. Do I need to uninstall the academic version before installing the new version? I ask because this is not an upgrade, but a completely new version.

    I'm with Jim on this.  It always seems to work out better if you do not install over another version.  You can use this app (freeware - thanks to Jon Chappel) to completely remove ALL Final Cut Studio apps and components: http://www.digitalrebellion.com/fcsremover/
    Once that's done, install your newly purchased version.
    -DH

  • I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

    I am using a macpro 12 core computer
    I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

    You can have them both on the same computer as I and many others have done for years.
    Just go ahead and install FCS 3 normally.
    There will be absolutely no problems.

  • Do I have to uninstall Final Cut Express 4 to Install Final Cut Studio 3

    Can I leave Final Cut Express 4 on my machine at the same time install Final Cut Studio 3. I have some unfinished projects on FCE I want to finish at some time but not necessarily in the next few weeks.
    Are these programs going to conflict with each other or is it best to just uninstall FCE? Also...is FCE uninstall just a straight delete? I don't see an uninstall app.
    Thanks
    Bryan

    FCE and FCS can live quit happilly together.
    Sticking to FCE for FCE stuff is a wise move.
    Al

  • Why Can't I Install Final Cut Studio?

    I have a MacBook Pro which is about 12 months old. It has a 2.66GHz Intel Core i7 Processor and 8G of RAM. I have been trying to install Final Cut Studio 5.1. Yeah I know that is an OLLLLLLLLLLLD version. Why I chose not to update is neither here nor there. I was about to update when Final Cut Pro X was realeaded and FCS vanished into the ether. I really only wanted DVD Pro but when that wouldn't install I went back to Square 1.
    The specificationa as stated are:- "These discs contain the files required to install Final Cut Studio 5.1 on either PPC or Intel based Mac computers."
    The error message that shows up on the screen when I click on the install package is:- "You can't open the application Final Cut Studio pro.mpkg because Power PC applucations are no longer supported."
    This is despite the stated specifications and the fact that there is a Universal Icon on the discs.
    I am also having a simillar but not the same problem with iLife '06 but i'll start another thread on that.
    I'm confused, thanks for your help in advance.

    Your problem is you are running Lion as your OS (10.7) and Lion does not support Rosetta which is required to run the INSTALLER of FCS 2. If you were running Snow Leopard, you would have been able to do the install.
    MtD

  • How can I install Final Cut Studio 2 on my new MacBook Pro with Lion?

    I just purchased and received a new 15" MacBook Pro (non-retina) last week. I need to install Final Cut Studio 2 on this computer. I have researched this and found that I need to install Rosetta from the Snow Leopard DVD in order to do this. This is the first Mac I've bought ( although I've been working with them for years), so I don't have a Snow Leopard DVD. I am a high school teacher and we use FCS 2 for my classes so buying FCP X is not a viable option for me since I teach FCP 6. The iMacs we use in school run Leopard and were never upgraded to Snow Leopard (budget cuts and all), so I can't even borrow one from my district.
    Does anyone know how I can obtain Rosetta? Or another way to install this without it?
    Thank you ! :)

    There is no way to add Rosetta support because it is not supported by OS X Lion at system level. This has been documented before the release of OS X Lion by itself.
    If you really need Final Cut Studio 2, I would return your computer if possible, and purchase a Mac that is capable of running Snow Leopard (all 2010 models, early 2011 MBP and some other 2011 models)

  • How can Install Final Cut Studio in my Mac Pro Early 2009 ??

    I have Final Cut Studio 7  NOT installed yet and Mac Pro Early 2009 with  OSX  10.9.5. I have Final Cut Pro X  Version  10.1.4 installed. Can I installed Final Cut Studio here together with  FCPX ?? Maybe not. What is the best way to install FCP Studio??
    Do I need to make a partition? How? If so, what is the best OSX Version for FCP Studio ??   10.6,  10.7,  10.8, 10.9  ??
    Thanks for any help I can get
    Alberto Marban

    Here is the Best Practice Guidelines from Apple:
    Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
    MtD

  • Imac won't let me install Final cut studio 2..it will let me install the upgrade, but it has no live type and i need it to work on my current projects. How do I get Live type back installed in iMac

    I just purchased an iMac for home and went to install final cut studio 2 and it gave me an error saying something about "PowerPC" not used or something like that. Installed the studio upgrade just fine...but it has no "Live Type" which I need to work on projects I have been using in my Mac Pro at my work place. How do I get "Live Type" to install in this iMac? Downloaded Live Type upgrade but that won't update cause there's no "Live Type" in the applications.

    It sounds like you have Lion installed on your new imac, although your profile says SL 10.6.8 (you may want to change this.)
    If you have the Snow Leopard install disc I believe you can install "Rosetta" from the extras folder which will then, if you have the original FCS2 discs , allow you to select and install Live Type and LIve Type content only from the custom install options.
    I hope this will work for you.
    DM

  • 7 Hours to Install Final Cut Studio 2??

    I just installed Final Cut studio 2 on my Brand New Mac Pro and it took 7 hours... I installed it on my other Mac Pro back in May and it maybe took maybe an hour. I was just going to ask and see if this was normal or if I should be concerned. I have also put a black magic card in the machine and run into some issues with that as well.
    Thanks for any thoughts you may have.

    Here's the trick you NEED to know.
    Once you know how to do this you will never again need to waste an entire evening inserting DVD's.
    1) Make disk images of all your DVD's using Disk Utility. Be sure to save them as DVD/CD Master in the Image Format dialogue box, with no compression added. Save all the disk images to an external drive if possible. Final Cut Pro users all have big external drives, but in a pinch this would work off an internal drive if you have the space.
    2) Mount all of the DVD copies on your desktop, all of them at one time. This assumes you have ample memory, which if you are running Final Cut Pro you'd better have.
    3) Start the install. Select your options. Then watch the magic as your Mac loads the DVD copies on your desktop until the process is done. It's that easy.
    It takes a while to make the disk images, but once you have them saved to your external drive you can use them again when you get a new machine or need to reinstall for any reason. This works with Logic Studio as well as the Adobe suites- I've used this process for years. In the old days we used this process for floppies; works just as well with CD's and DVD's. Once you try it you will be dedicating an external drive to software installer disk images.
    Cool, or what?
    Message was edited by: bigwheel

  • Can't install Final Cut Studio

    I have a MacBook Pro OS X 10.6.6 and am trying to install Final Cut Studio. When individually do Livetype or Motion it works. When I do the Final Cut disc I get this error message.
    "Your computer does not have the hardware required to run this software. See the Read Me for details."
    My computer should have necessary specifications with 2.66 GHz Intel Core i7, 8 GB 1067 MHz DDR3.
    What should I do?

    That could very well be a Pre-Intel version of FCS. It won't install properly on an Intel Mac.

  • Can't install Final Cut Studio 2 because "PowerPC applications are no longer supported"

    Bought a brand new 15" MacBookPro OS X 10.7 2.2Ghz Intel Core i7 and tried to install Final Cut Studio 2. Got the error message "You can't open the application FinalCutStudio.mpkg because PowerPC applications are no longer supported." Oh no, does this mean I have to spend more money!???

    I'd like to provide an update on this situation in case anyone is in the same boat I am.
    I went to the Apple store today. I asked if I could downgrade my operating system. They said no, since it came pre-installed with Lion. I asked if Final Cut Studio 3 was compatible with Lion. They said yes, for the most part. They said there was an issue exporting video in 1080p.
    Of course, conveniently Apple is no longer selling FCS3 and the ones on Ebay I saw have gone up to more than $650 a copy. I am out $400 for stupidly buying FCS2 a few months ago, which is now useless to me. I told the Apple guy that I'm not buying FCS X until they work out all the kinks. This leaves me with this laptop that I bought for video editing with no editing software to use.
    I never thought I'd say this, but I'm actually considering getting Premiere Pro now for Apple, which is supported in Lion and is running a deal for 50% off. (http://www.adobe.com/products/creativesuite/faq.html#lion-os) If Apple doesn't start selling FCS 3 again, they are really not giving me any choice but to switch!

  • Can I install Final Cut Studio 3.0 after already having FCP X?

    I have already installed FCP X on one of my computers.  I need to install Final Cut Studio 3.0 on the same computer now. 
    When I tried to install, I get the selection screen and Final Cut is ghosted out and unavailable.
    Is there a way around this?  I know FCP X can co-exist with Final Cut Studio 3.0 if it's installed afterward, but I need to know if I can install Final Cut Studio after FCP X which I imagine is a fairly rare situation.
    I'm on Lion -- in case that matters.
    _Matt_

    I'm not positive, but I believe that FCPX installer is aware of FCS. If you intsall FCPX and FCS is already on your computer, the FCPX installer will move FCS into a folder inside Applications. I'm sure FCS installer is not aware of the existance of FCPX.
    I would guess that you would have to uninstall FCPX, install FCS and then, if you wanted, re-install FCPX, using the App Store.
    I have not actually done this, but I'm guessing that having FCPX already on your computer is what's causing issues with the FCS installer.

  • Re installing Final Cut Studio on my NEW Mac pro?

    I originally purchased Final Cut Studio (on a G5 Power PC), Then installed the universal crossgrade,
    then installed Final Cut Studio 2. Now I have a New Mac Pro (Intel Chips) How do I go about
    reinstalling FCS? do I need the original serial key from the first version or do I just use my
    FCS 2 serial Key?
    J>H<L

    J>H<L
    You'll need both keys, but you only have to do one installation.
    The FCS2 installer will ask for the FCS2 key. If that passes, another window will open asking for the FCS key. If that key passes, then it's just a normal installation.

  • Problems installing Final Cut Studio on my new Macbook Pro

    I just got my new 17 inch Macbook Pro, and am trying to install Final Cut Studio 3.  It installed just fine, and accepted the serial number.  The problem is that every time I open the application, I have to reenter the serial number.  Once I do that, it runs fine, but the next time, I have to reenter the info again.  Anyone have an idea of how to fix this?
    Rob Krampf

    do some searching here.  I remember other people having this problem.  You might also try repairing permissions on your startup drive, deleting your fcp preferences
    https://discussions.apple.com/docs/DOC-2491
    And creating a new account in system preferences:  accounts.

  • Problens with installing Final Cut Studio

    When I am trying to install Final Cut Studio 5.1 I get the error message
    Licensing Error: The license file will not be written to disk because the user does not have enough priviledges.
    I have been through andd made sure that I have admin rights
    Can anyone help?
    Thanks

    don't know if this will help, but the first thing i would do is use the disk utility to "repair permissions" on your hard drive.
    R.

Maybe you are looking for

  • How should I move to a new Apple ID?

    Hey everyone! With lots of problems with my new iPhone 4s, studying Apple's devices and services such as Apple ID and iCloud, it's time for me to create new Apple ID. I have made a lot of mistakes... New Apple ID! :) So here's my question: How to mov

  • IPHOTO EVENTS = NONEXISTANT

    my events tab in iPhoto 08 are the exact same "preview" as the Photos preview tab (on the left side). It's been a long day, trying to fix this, but here is basically what happened 1. i installed adobe reader 8 (it was VERY slow on my mac), but after

  • SQL Query doesn't work coccrectly

    The table includes list of month and years. When I write SELECT MONTH,YEAR FROM MONTH_DETAILS ORDER BY YEAR DESC,MONTH DESC; it works correcty and returns MONTH YEAR 7 2009 6 2009 5 2009 4 2009 3 2009 2 2009 1 2009 12 2008 11 2008 But when I want to

  • How to link LIPS table to VBPA table in infoset

    I have created an infoset z_shipping using logical database 'vfv'. when i try to add table lips into vbpa i have found that the system is selecting single * from lips where vbelm and posnr field automatically. Is there anyway where I can select LIPS

  • XSLT & TBIT44 Certification Exam ?

    Hello, Would u know if I need to know XSLT mapping for giving the XI Certification exam ? Thanks, Bhishma