I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

Similar Messages

I have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?

i have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?

Without knowing what you have tried please open System Preferences - Sharing - File Sharing and select File Sharing. If you still have trouble you can call AppleCare in the morning when they re-open. You have 90 days of telephone support if you haven't already bought AppleCare.

I can log into Connect Central, but I can't log into a specific meeting. How can I fix this?

I can log into Connect Central, but every time I try to log into this specific meeting it gives me the "Invalid User/Password" error even though I'm using the right password.

In Connect Central, you should see a My Meetings tab on the home page. Any meetings that you have pre-defined permissions to (Participant, Presenter or Host) should show up there. If you have permissions, you may be able to browse to the meeting location on the server and enter it there, but that may not be a possibility for you.
Additionally, if you are logged into Connect Central, then clicking on the link for the meeting should just pass you into the room.

My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
http://www.apple.com/retail/geniusbar/

HT1349 I have been using an app ( cheat with words qith friends) that I have been using for a long time. One day it just won't read the screen shot. It still works on my iPhone Please help!! The trouble is on my iPad. Thank you!!I

I have been using an app cheat with friends with my iPad for a long time. One day it just stopped reading the screen shot. I have tried deleting a few times and starting over. It works on my iPhone perfectly fine. Please help !!!!!!! Thank you

@Colin Robinson
Thanks, I did it hundreds of time!!!
Anyway here's what I did:
I'd wrote an email to Apple America, even if I'd purchased the item in Europe and the US support usually should not be involved in any European case.
They wrote me back that a European office will have call me in 48 hours.
After a couple of days I've received a call and a new iPod is coming from US...
Don't ask me if I can find any kind of logic behind it, but at least I can state that the US support has been decisive.
Thanks to everybody.

I love new updates; I read the information, but missed that Dashland, as with last update, does not work. Can't live without it. I've updated. Now, what to do?

Last update clearly informed me that Dashlane did not work with the update. I read the information this morning before downloading and did not see that once again, Dashlane will not work. I must have access to my passwords. Do I have any recourse other than re-installing the last version of Firefox? Or, using Safari in the interim so I can use iCloud to reveal passwords?

See this Dashlane support page - http://support.dashlane.com/customer/portal/articles/390903

Bought iworks family via download. Apple told me to copy onto usb and then i could transfer to other family members. However, when gragged off usb onto desktop it will not work. Checked system requirments and everything fine. anyone know what the problem

Hi. Bought iwork family as a download rather than on DVD. Want to transfer to other macs in household. Apple told me to transfer to USB stick and then put on other macs. Doesn't work and get message saying "keynote cannot be opened due to a problem". Same problem for .pages and .numbers. I have reinstallled but same problem. Have checked system requirements and everything seems fine.Any one have any ideas how to solve this. Thanks

I'm an applications developer and also run a part-time videography business. As such, I require more than 3.12GB of RAM. That is the physical limitation of a 32bit system. Pointless to stay on 32bit if you plan on having more than that much RAM.
I'm also not about to pay someone to fix my PC when I can do it myself. I was originally hoping for someone who had experienced the problem before to point me in the right direction so I didn't have to spend so much time trying to figure out what the issue was for myself.
Basically, in the end the problem was caused because right at the point in time when I chose to uninstall, and reinstall; Apple released a new version of iTunes. This version in turn had a requirement of iOS 4.2 to sync with the iPhone. This is a pretty embarrassing for Apple that they would release software reliant on other software before said software was released.
Had I realised I was downloading a newer version at the initial point of installation, this wouldn't have been an issue. I could've easily have rolled back iTunes to the previous version and gotten on with my life.
Another issue is that iTunes is not actually a 64 bit application. It masquerades as one to allow installation on the 64 bit platform.

Bridging WiFi and ethernet cards not working

My setup is that I have a laptop with both a wifi card and an ethernet card that can connect to the network via wifi. I also have a desktop with no wifi card that I want to use on the network. I have the two connected via an ethernet cable. I want to bridge the wired and wireless connections on my laptop so that my desktop can be on the same network. When I do this, however, problems arise on the wifi. According to iwconfig, it can connect to the network, but when I run dhcpcd on the wireless interface it times out on waiting for carrier. The bridging in WIndows works fine, but I'd rather not reboot just for this task. Does anyone know a solution to this problem? I am running a bcm4312 wifi card if it helps.
Last edited by correnos (2010-03-14 18:43:51)

ifconfig eth0 down
ifconfig eth1 down
brctl addbr br0
brctl addif br0 eth0
brctl addif br0 eth1
ifconfig eth0 up
ifconfig eth1 up
wpa_supplicant -B -Dwext -i eth0 -c /etc/wpa_supplicant.conf
# wait 10 seconds or so
iwconfig eth0 # shows it's connected
dhcpcd eth0 # times out

My MacBook Pro's USB ports will not work. Is there anything I can do to fix this?

I bought it in late May of '12. The USB ports stopped working a couple of months after I bought the computer. I did not spill anything on it or drop it. I went in and had them fix it and they worked for about a month. They will work occasionally and it takes me removing and entering the USB connector multiple times before it recognizes that anything is there. The computer is no longer under warranty and I don't want to have to pay a bunch of money to have it fixed. Is there anything that I can do to fix this or am I going to have to have someone else do it.

Maybe a PRAM reset will work:
http://support.apple.com/kb/ht1379
If there is no change, bring the MBP to an Apple store genius bar for a free evaluation. Bring the recalcitrant devices with you. This should at least determine exactly where the fault lies, with the MBP or the externals. Any repair costs quoted you may accept or reject.
Ciao.

I have big problem with battery, It's not working good just two hours and stop without any warning when the battery in 50% then reach 30% in the same moment, then the iphone stopped,what I can do for that and I live in Egypt???any help

My Iphone 4 is very good until last Thursday, I used it from sep 2011 without any problems, My problem is the battery is down without any warning and working after 100% then 82% then 50% then 30% and down these things throw less than two hours
what can I do with that??
Also, I live in Cairo,Egypt
waiting your recommendations

Hi,
"But it didn't work it's just turning them to black gray scale colors not what i was thinking about."
If you want it to be colored, you'll need to create a color-palette for the 8bppIndexed bitmaps. The keyword for this process is "Color-Quantization".
The whole yellow-green pie you get is from the wrong format. If you convert the 32bpp bitmaps to 24 bpp bitmaps, you loose the alpha channel ("transparency"). You can manually set one color to "transparent" with the mMakeTransparent-method
of the Bitmap class, or simply use gif-images (they are 8bpp with a transparent "key"-color)
Regards,
Thorsten

Business Contact Manager 2013 Issue with drop down menus not working correctly and BCM disappearing.

We upgraded from BCM 2007 to BCM 2013. Now the BCM disappears from Outlook occasionally and the drop down menus are confused. for instance when accessing the drop down for phone numbers, the user selects company - but the field for TTY/TDD comes up.
Shows fields that don't exist etc.
The client is using Office 2013 Pro Premium from Office 365 Small Business Premium subscription and BCM downloaded from Microsoft website.
Please let me know what the support avenues are for this product.
Chris Smith

Hi,
This issue may be caused since the BCM was not installed properly.
Please go to Control Panel -> Programs and Features, find Business Contact Manager for Microsoft Outlook and Uninstall it.
Then go to
http://www.microsoft.com/en-us/download/details.aspx?id=36513, download the right version of BCM(32bit or 64bit) and install it.
If issue persists, you may provide the screenshots of the issue, post them to SkyDrive and share it via a link:https://skydrive.live.com/, then we will have a better understanding on the issue.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Runtime error R6025 message after log on to Vista - Flash Card not working

Hi
I'm a newbie & would appreciate any advice.
I am getting a runtime error message R6025 when I log on to Windows Vista.
When I click out of the box I then get a message saying Toshiba Flash Card not working.
I cancel that and my laptop is ok except I don't know if the flashcard is working or not because I don't know what it does.
Sorry if I sound thick
Thanks
Neelie

Hi
I found this MS knowledge base article:
+Description of the R6025 run-time error in Visual C++\+
http://support.microsoft.com/kb/125749
But I doubt this description would be useful for you or anyone here. It describes this error in Visual C++ and this is programming language.
However, I think you should simply reinstall the Value Added Package which you could download firstly from the Toshiba European page.
At first you have to remove the old Value Added Package from the system, then reboot the notebook and follow with new VAP installation.
Bye

Can log into Yosemite server (4.0) VPN service with a Mavericks client, but not Yosemite client

Sever Info:
Yosemite Server 4.0 running on a late 2009 Mac Mini with 8 GB RAM with vpnd service enabled
The server was upgraded to Yosemite - not clean install - this may not matter (see below)
Airport extreme router with standard VPN UDP ports for L2TP forwarded to server (500, 1701, 4500)
Client info:
MB Air 13" early 2014 with 8 GB RAM
Yosemite
Mavericks 10.9.5 running as a Parallels virtual machine (don't ask - I need it to run an app for work that is not yet compatible with Yosemite)
OD service is NOT running - no VPN connections ever occurred from ANY client with this service running - OD is not needed in my case fortunately
With the OD service off, I can connect via the Mavericks virtual machine just fine, but not with Yosemite. With Yosemite, the ppp connection appears to occur, but server config requests appear to fall on deaf ears (client side doesn't appear to respond) until the connection times out. Can't figure out what triggers the client response to a server config request. Client side complains about no route to host and IP addresses don't get assigned to the connection.
The connection happens successfully in an eyeblink with the Mavericks client. Same username/password/shared secret in both instances.
Tried a generated .vpnconfig from the server, this also did not work.
It's possible that it is an auth problem, but can't figure out how the process occurs or what may be going wrong. There does not seem to be an obvious way to increase the granularity of the logging such that it might give other hints - at least that I can find. I found plenty of references to VPN issues when people upgraded from Mountain Lion to Mavericks as well as work arounds for this. I tried the most promising looking of those - no love. I reverted everything back to stock install since I could at least connect with Mavericks.
If log entries would be helpful, they are included below. I've stared at them long enough - perhaps a new set of eyes can provide a hint.
In addition, I can find no documentation regarding the VPN service in Yosemite server so as to get a clue as to whether there have been changes in racoon since Mavericks.
Thanks in advance for any suggestions. I would be glad to supply any other info needed for an accurate diagnosis .
Pat
==
Regarding the Yosemite client connection in the Yosemite server VPN Service log:
2014-10-21 12:18:30 MDT
Incoming call... Address given to client = 192.168.1.228
Tue Oct 21 12:18:30 2014 : Directory Services Authentication plugin initialized
Tue Oct 21 12:18:30 2014 : Directory Services Authorization plugin initialized
Tue Oct 21 12:18:30 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:18:30 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:18:30 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:18:30 2014 : L2TP incoming call in progress from 'my.dotted.quad.address'...
Tue Oct 21 12:18:30 2014 : L2TP received SCCRQ
Tue Oct 21 12:18:30 2014 : L2TP sent SCCRP
Tue Oct 21 12:18:30 2014 : L2TP received SCCCN
Tue Oct 21 12:18:30 2014 : L2TP received ICRQ
Tue Oct 21 12:18:30 2014 : L2TP sent ICRP
Tue Oct 21 12:18:30 2014 : L2TP received ICCN
Tue Oct 21 12:18:30 2014 : L2TP connection established.
Tue Oct 21 12:18:30 2014 : using link 0
Tue Oct 21 12:18:30 2014 : Using interface ppp0
Tue Oct 21 12:18:30 2014 : Connect: ppp0 <--> socket[34:18]
Tue Oct 21 12:18:30 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:33 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:36 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:39 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:42 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:45 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:48 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:51 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:54 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:57 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:19:00 2014 : LCP: timeout sending Config-Requests
Tue Oct 21 12:19:00 2014 : Connection terminated.
Tue Oct 21 12:19:00 2014 : L2TP disconnecting...
Tue Oct 21 12:19:00 2014 : L2TP sent CDN
Tue Oct 21 12:19:00 2014 : L2TP sent StopCCN
Tue Oct 21 12:19:00 2014 : L2TP disconnected
2014-10-21 12:19:00 MDT
   --> Client with address = 192.168.1.228 has hungup
==
Client side log for this connection using the Yosemite client:
Tue Oct 21 14:32:08 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 14:32:08 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 14:32:08 2014 : L2TP connecting to server 'myserver.com' (my.dotted.quad.address)...
Tue Oct 21 14:32:08 2014 : IPSec connection started
Tue Oct 21 14:32:09 2014 : IPSec connection established
Tue Oct 21 14:32:10 2014 : L2TP connection established.
Tue Oct 21 14:32:10 2014 : L2TP set port-mapping for en0, interface: 4, protocol: 0, privatePort: 0
Tue Oct 21 14:32:10 2014 : Using interface ppp0
Tue Oct 21 14:32:10 2014 : Connect: ppp0 <--> socket[34:18]
Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0, interfaceIndex: 0, Protocol: None, Private Port: 0, Public Address: 3fe4b3e8, Public Port: 0, TTL: 0.
Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0 inconsistent. is Connected: 1, Previous interface: 4, Current interface 0
Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0 initialized. is Connected: 1, Previous publicAddress: (0), Current publicAddress 3fe4b3e8
Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0 fully initialized. Flagging up
Tue Oct 21 14:32:25 2014 : write: No route to host
Tue Oct 21 14:32:25 2014 : write: Host is down
Tue Oct 21 14:32:28 2014 : write: Host is down
Tue Oct 21 14:32:28 2014 : write: Host is down
Tue Oct 21 14:32:31 2014 : write: Host is down
Tue Oct 21 14:32:31 2014 : write: Host is down
Tue Oct 21 14:32:34 2014 : write: Host is down
Tue Oct 21 14:32:34 2014 : write: Host is down
Tue Oct 21 14:32:37 2014 : write: Host is down
Tue Oct 21 14:32:37 2014 : write: Host is down
Tue Oct 21 14:32:40 2014 : LCP: timeout sending Config-Requests
Tue Oct 21 14:32:40 2014 : Connection terminated.
Tue Oct 21 14:32:40 2014 : L2TP disconnecting...
Tue Oct 21 14:32:40 2014 : L2TP error sending CDN (Host is down)
Tue Oct 21 14:32:40 2014 : L2TP clearing port-mapping for en0
Tue Oct 21 14:32:40 2014 : L2TP disconnected
==
Pertinent client side log for connection of Mavericks client to Yosemite server:
Tue Oct 21 13:29:13 2014 : Connect: ppp0 <--> socket[34:18]
Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0, interfaceIndex: 0, Protocol: None, Private Port: 0, Public Address: 3fe4b3e8, Public Port: 0, TTL: 0.
Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0 inconsistent. is Connected: 1, Previous interface: 4, Current interface 0
Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0 initialized. is Connected: 1, Previous publicAddress: (0), Current publicAddress 3fe4b3e8
Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0 fully initialized. Flagging up
Tue Oct 21 13:29:21 2014 : local IP address 192.168.1.229
Tue Oct 21 13:29:21 2014 : remote IP address 192.168.1.2
Tue Oct 21 13:29:21 2014 : primary   DNS address 192.168.1.2
Tue Oct 21 13:29:21 2014 : secondary DNS address 8.8.8.8
Tue Oct 21 13:29:21 2014 : l2tp_wait_input: Address added. previous interface setting (name: en0, address: 10.0.1.38), current interface setting (name: ppp0, family: PPP, address: 192.168.1.229, subnet: 255.255.255.0, destination: 192.168.1.2).
Tue Oct 21 13:29:21 2014 : Committed PPP store
Tue Oct 21 13:29:21 2014 : Committed PPP store
Tue Oct 21 13:52:32 2014 : [DISCONNECT]
Tue Oct 21 13:52:32 2014 : Hangup (SIGHUP)
Tue Oct 21 13:52:32 2014 : Connection terminated.
Tue Oct 21 13:52:32 2014 : Connect time 23.4 minutes.
Tue Oct 21 13:52:32 2014 : Sent 2674664 bytes, received 10680854 bytes.
Tue Oct 21 13:52:32 2014 : L2TP disconnecting...
Tue Oct 21 13:52:32 2014 : L2TP clearing port-mapping for en0
Tue Oct 21 13:52:32 2014 : L2TP disconnected
==
Regarding the Mavericks client connection in the Yosemite server VPN Service log:
2014-10-21 12:09:48 MDT Incoming call... Address given to client = 192.168.1.226
Tue Oct 21 12:09:48 2014 : Directory Services Authentication plugin initialized
Tue Oct 21 12:09:48 2014 : Directory Services Authorization plugin initialized
Tue Oct 21 12:09:48 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:09:48 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:09:48 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:09:48 2014 : L2TP incoming call in progress from ‘my.dotted.quad.address’…
Tue Oct 21 12:09:48 2014 : L2TP received SCCRQ
Tue Oct 21 12:09:48 2014 : L2TP sent SCCRP
Tue Oct 21 12:09:48 2014 : L2TP received SCCCN
Tue Oct 21 12:09:48 2014 : L2TP received ICRQ
Tue Oct 21 12:09:48 2014 : L2TP sent ICRP
Tue Oct 21 12:09:49 2014 : L2TP received ICCN
Tue Oct 21 12:09:49 2014 : L2TP connection established.
Tue Oct 21 12:09:49 2014 : using link 0
Tue Oct 21 12:09:49 2014 : Using interface ppp0
Tue Oct 21 12:09:49 2014 : Connect: ppp0 <--> socket[34:18]
Tue Oct 21 12:09:49 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x4bc40d9f> <pcomp> <accomp>]
Tue Oct 21 12:09:49 2014 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x71598937> <pcomp> <accomp>]
Tue Oct 21 12:09:49 2014 : lcp_reqci: returning CONFACK.
Tue Oct 21 12:09:49 2014 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x71598937> <pcomp> <accomp>]
Tue Oct 21 12:09:49 2014 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x4bc40d9f> <pcomp> <accomp>]
Tue Oct 21 12:09:49 2014 : sent [LCP EchoReq id=0x0 magic=0x4bc40d9f]
Tue Oct 21 12:09:49 2014 : sent [CHAP Challenge id=0x73 <074a110a5e0620296b1937345c34090e>, name = “myserver.private”]
Tue Oct 21 12:09:49 2014 : rcvd [LCP EchoReq id=0x0 magic=0x71598937]
Tue Oct 21 12:09:49 2014 : sent [LCP EchoRep id=0x0 magic=0x4bc40d9f]
Tue Oct 21 12:09:49 2014 : rcvd [LCP EchoRep id=0x0 magic=0x71598937]
Tue Oct 21 12:09:49 2014 : rcvd [CHAP Response id=0x73 <dfed1e41e1fb8c1132387c3d7792b1880000000000000000b2b163259cbe410aae792093680ba7 a89da3b46737c0d8d200>, name = "somelocaluser"]
Tue Oct 21 12:09:54 2014 : sent [CHAP Success id=0x73 "S=00EDB07933CE697641E2263A2A76386389512329 M=Access granted"]
Tue Oct 21 12:09:54 2014 : CHAP peer authentication succeeded for somelocaluser
Tue Oct 21 12:09:54 2014 : DSAccessControl plugin: User 'somelocaluser' authorized for access
Tue Oct 21 12:09:54 2014 : sent [IPCP ConfReq id=0x1 <addr 192.168.1.2>]
Tue Oct 21 12:09:54 2014 : sent [ACSCP ConfReq id=0x1]
Tue Oct 21 12:09:54 2014 : rcvd [CHAP Response id=0x73 <dfed1e41e1fb8c1132387c3d7792b1880000000000000000b2b163259cbe410aae792093680ba7 a89da3b46737c0d8d200>, name = "somelocaluser"]
Tue Oct 21 12:09:54 2014 : sent [CHAP Success id=0x73 "S=00EDB07933CE697641E2263A2A76386389512329 M=Access granted"]
Tue Oct 21 12:09:54 2014 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Tue Oct 21 12:09:54 2014 : ipcp: returning Configure-NAK
Tue Oct 21 12:09:54 2014 : sent [IPCP ConfNak id=0x1 <addr 192.168.1.226> <ms-dns1 192.168.1.2> <ms-dns3 8.8.8.8>]
Tue Oct 21 12:09:54 2014 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::021c:42ff:febf:bf66>]
Tue Oct 21 12:09:54 2014 : Unsupported protocol 0x8057 received
Tue Oct 21 12:09:54 2014 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 1c 42 ff fe bf bf 66]
Tue Oct 21 12:09:54 2014 : rcvd [ACSCP ConfReq id=0x1 <route vers 16777216> <domain vers 16777216>]
Tue Oct 21 12:09:54 2014 : sent [ACSCP ConfRej id=0x1 <route vers 16777216>]
Tue Oct 21 12:09:54 2014 : rcvd [IPCP ConfAck id=0x1 <addr 192.168.1.2>]
Tue Oct 21 12:09:54 2014 : rcvd [ACSCP ConfAck id=0x1]
Tue Oct 21 12:09:54 2014 : rcvd [IPCP ConfReq id=0x2 <addr 192.168.1.226> <ms-dns1 192.168.1.2> <ms-dns3 8.8.8.8>]
Tue Oct 21 12:09:54 2014 : ipcp: returning Configure-ACK
Tue Oct 21 12:09:54 2014 : sent [IPCP ConfAck id=0x2 <addr 192.168.1.226> <ms-dns1 192.168.1.2> <ms-dns3 8.8.8.8>]
Tue Oct 21 12:09:54 2014 : ipcp: up
Tue Oct 21 12:09:54 2014 : found interface en0 for proxy arp
Tue Oct 21 12:09:54 2014 : local IP address 192.168.1.2
Tue Oct 21 12:09:54 2014 : remote IP address 192.168.1.226
Tue Oct 21 12:09:54 2014 : Received acsp/dhcp dictionaries
Tue Oct 21 12:09:54 2014 : Received acsp/dhcp dictionaries
Tue Oct 21 12:09:54 2014 : l2tp_wait_input: Address added. previous interface setting (name: en0, address: 192.168.1.2), current interface setting (name: ppp0, family: PPP, address: 192.168.1.2, subnet: 255.255.255.0, destination: 192.168.1.226).
Tue Oct 21 12:09:54 2014 : rcvd [ACSCP ConfReq id=0x2 <domain vers 16777216>]
Tue Oct 21 12:09:54 2014 : sent [ACSCP ConfAck id=0x2 <domain vers 16777216>]
Tue Oct 21 12:09:54 2014 : Received protocol dictionaries
Tue Oct 21 12:09:54 2014 : Committed PPP store
Tue Oct 21 12:09:54 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:09:54 2014 : rcvd [IP data <src addr 192.168.1.226> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
Tue Oct 21 12:09:54 2014 : sent [IP data <src addr 192.168.1.2> <dst addr 192.168.1.226> <BOOTP Reply> <type ACK> <server id 0xc0a80102> <domain name "local">]
Tue Oct 21 12:09:57 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:00 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:03 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:06 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:09 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:09 2014 : rcvd [LCP TermReq id=0x2 "User request"]
Tue Oct 21 12:10:09 2014 : LCP terminated by peer (User request)
Tue Oct 21 12:10:09 2014 : ipcp: down
Tue Oct 21 12:10:09 2014 : sent [LCP TermAck id=0x2]
Tue Oct 21 12:10:09 2014 : l2tp_wait_input: Address deleted. previous interface setting (name: en0, address: 192.168.1.2), deleted interface setting (name: ppp0, family: PPP, address: 192.168.1.2, subnet: 255.255.255.0, destination: 192.168.1.226).
Tue Oct 21 12:10:09 2014 : L2TP received CDN
Tue Oct 21 12:10:09 2014 : Connection terminated.
Tue Oct 21 12:10:09 2014 : Connect time 0.4 minutes.
Tue Oct 21 12:10:09 2014 : Sent 1003 bytes, received 646 bytes.
Tue Oct 21 12:10:09 2014 : L2TP disconnecting...
Tue Oct 21 12:10:09 2014 : L2TP disconnected
2014-10-21 12:10:09 MDT   --> Client with address = 192.168.1.226 has hungup

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I can log into yahoo but when I click mail I get a message saying that firefox can't find my address and asking me to check the spelling. Even plugging in the right address doesn't work though my wife can log into her email just fine.

Ever since removing and updating Adobe Flash Player I suddenly cannot get my Yahoo email page to come up with Mozilla 4.0 or 3.6. I can log into yahoo but when I click on Mail from the welcome page I get an error message saying that it cannot find the email address and asking me to check the spelling. I have tried removing and redownloading 4.0 and 3.6. Same problem. With other browsers--Opera, Chrome, and Safari--I don't have this problem. Please help me solve this problem as Mozilla is my default browser.

Its known issue, see;
* https://bugzilla.mozilla.org/show_bug.cgi?id=713014
please open a bugzilla account and add your email in cc list if you want to follow the bug?
Someone having the problem, but when he upgrade Java runtime, his poblem was fixed, make sure your JRE has been up to date?
Also maybe this bug is fixed in nightly?
* firefox.com/beta

I can log into iTunes and App Store but NOT iMessage. What gives?

I'm currently using Wifi with my 3rd gen iPad. iOS 6.0.1. I'm not home so I don't have access to my iMac (actually currently at 30k ft somewhere over Virginia :) ).
Anyway, I can log into iTunes, access the App Store, sign out of those, log back in. No prob. I used my appleID and pass to write this message. But I cannot get into Imessage, and I can't figure it out!
I get an error saying: "could not sign in. Please check your network connection and try again." If I try to make a new appleID, imessage thinks and thinks...nothing happens.
This isn't a new issue, it's been like this for quite a while, since upgrading to iOS 6 months ago. How can I get into imessage on my ipad? For what it's worth, it works fine on my iPhone.
Would appreciate any help!

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note:
Some In-App Purchases require a Credit Card.

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

Similar Messages

Maybe you are looking for