I have installed the newest version. Unfortunately, now I only have sounds but no graphs
I have installed the newest version. Unfortunately, now I only have sounds but no graphs
What is your Flash Player version?
One thing to try is to update your graphics driver; see http://forums.adobe.com/thread/945765
Similar Messages
-
I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.
Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy -
I have a windows 8 computer and I installed the newest version of itunes because I used to have an ipod and I have a few purchases that I wanted to listen to. When I try to play them it says it's playing but I can't hear anything. It does not even says it's played the whole way. It just stays at the beginning. It won't let me pause. I checked my computer sound and there is nothing wrong with it. So there must be some software problem but idk what it is. If anyone can help I would appreciated. Thank-you
Hi DJBentley2011,
Welcome to Apple Support Communities.
It sounds like there is an issue burning CD's in iTunes. Is the playback issue only occurring on a specific device and does the disc show up correctly in iTunes? The article linked below should help you resolve optical drive issues, it walks you through identifying potential issues and provides troubleshooting suggestions.
iTunes for Windows: iTunes Diagnostics, CD/DVD Drive Tests
http://support.apple.com/kb/HT1567
I hope this helps.
-Jason -
I would like to install the newest version of Acrobat Adobe into 6 computers. I wonder what tha will cost, for a month and to buy it directly? On one computer we have version 9, and that one we would like to uppgrade to the latest version?
Hi Linafrick,
To install Acrobat 11 on to 6 computers you can purchase Volume License.
But since you want it for only a month you need to purchase Acrobat subscription.
A single subscription is good for 2 computers and the same Adobe ID cannot be used to buy multiple subscription copies of Acrobat.
You can however opt for Creative Cloud for Team license such that you can become the Admin and grant access to the 6 users who wish to install Acrobat on their machines.
Feel free to reach our customer service via chat to know more information: Creative Cloud membership support
Regards,
Rave -
My Itunes wouldn't acknowledge my new Ipod, so i uninstalled it (older version) and now I'm trying to install the newest version. I'm getting this error.
"An error ocurred during installation of assembly. "Microsoft. VC80.CRT type="win32. Version="8.50726195". publickeytoken="1fc8b3b9a1e18c3b" processor architechture="x86." Please refer to help and support for more information. Hresult=0x80070002
I an stumped.....I Think it is telling you your computer operating system is too old for the newest update.
What are you running? -
I'm trying to install the newest version of iTunes but it's saying the version i have isn't new enough for me to update it. This makes no sense to me... how do I get the newest version?
I Think it is telling you your computer operating system is too old for the newest update.
What are you running? -
After downloading and trying to install the newest version of i tunes on my pc, I got an error message telling me: unable to locate component MSVCR80.dll. Now I can't use the version I had and obviously not the newest version. Any ideas about how to fix ?
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
I am trying to delete an old version of itunes in my ibook G4 so I can install the newest version and can not delete the old version because it says I don't have enough privileges, help?
iTunes is not installing because its incompatible with your OS. When installing the correct version the new version will update the older version, there is no need to uninstall first.
The last version of iTunes compatible with OSX 10.4 is iTunes 9.2.1
You can down load iTunes 9.2.1 here:
iTunes 9.2.1 -
I put I TUNES library on my external hard drive.
Then I installed the newest version of ITune - 12.1.0.5.
Now I can;t play the music on the external drive.
What to do?
ThanksThanks, Limnos,
Worked perfectly. -
i have an old macbook, i just installed the newest version of iTunes and it opens but before i can accept on the first screen, an error pops up (-45054), help me please!?
Did you try to uninstall and reinstall the iTunes back in?
-
I have Windows 7 and I just installed the newest version of iTunes on my PC. Now whenever I try to open iTunes an error message comes up that the file is corrupt or wasn't installed properly. How do I reinstall the update or fix the problem?
... and that's a new one that I wasn't expecting ...
Okay ... lets try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I am unable to upload the latest version of iTunes. It worked before and when prompted uploaded the newest version. Now I'm unable to access iTunes..."Error 7 Windows Error126. Insufficient privileges". What do I do?
Hey thomashfrompa,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M. -
I installed the new version thinking it would be the same, It was horrible! uninstalled it... Installed the older version and now it won't open and when I try it says it can't because the library can't open because it was used on a newer version. Come on! I just want my music! How do I open this and get my music back.
I put my Ipod in and it still says the same thing, what's going on? Please help me!I don't know whom to thank first-- b noir for telling me about the Lorraine fix or Lorraine for figuring out the fix. THE LORRAINE FIX WORKED FOR ME!!! (I feel a little like I am advertising "Hooked on Phonics" with that last line!)
Thank you doesn't say it strongly enough, but THANK YOU b noir and Lorraine for your help. I was to the boiling point last night and starting to get there tonight. Now I am resting easy and thankful that there is a community of computer users out there who care enough to troubleshoot problems together and work together to figure out a solution--and then to take the time to post and share information.
I would STRONGLY suggest that anyone who is having the iTunes issues where iTunes just plain won't open at all after downloading the newest version and has a pc with Norton Internet Security 2005 try the "Lorraine Method."
I am so happy I think I might sing. Or not--I will let my songs on iTunes do the singing for me now that I can again!!!!!!!
And to those still looking for answers--be patient--I now know how incredibly frustrating this can be and I hope that you all find your solutions very very soon!!
--Alexis -
I am trying to instal the latest version of iTunes onto my MacBook Pro, but my computer has been "configuring" the installation since 5pm yesterday and now it is 10:30am. It has never done this before. Can anybody help me out?
Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help
Maybe you are looking for
-
Do you have a way that allows you to save attachments from multiple emails at the same time?
I have thousands of emails that I have put into Thunderbird's Local Folders, but now would like others in to access the attachments and don't want to go email by email to save off the attachments, time is prohibitive, so was hoping there is a way to
-
HP OfficeJet Pro 8000 does not print black
Hi We bought an HP office pro 8000 printer which we have had in the box in a cupboard for the last 14 months (never been opened), I have finally got around to getting it out of the box ans setting it up, however it does not seem to print black only t
-
Content management in KM - Read
Dear Sir, We use the content Management in EP 6.0 SP14 , when I setting for the user in "Read" status. Is it prevent the use to save target as or print to? Please kindly advice. Thank you and best regards, Vimol
-
Upload Vendor Classification Data in R3
Hello Everyone, I was trying to get my hand on a Function Module for uploading Vendor Master Classification data in R3. I came across CLFM_OBJECT_CLASSIFICATION. I do not know if this is the right one and also how it works. If someone could just he
-
Query takes much time while sum of yearly bases amount
I have made query on the basis of joing to get payroll data it's woking fine but when we accumulate this on yearly basis while giving parameter from and to date then it takes much time, so how can we optimise this. please advice.