I have intel mac 10.411, want to access iTunes, won't let me unless upgrade tp itunes 10, but it needs OSX 10.5. I just want to download some music, not upgrade my operating system. It's not THAT old. Ideas?
I have intel mac 10.411, want to access iTunes, won't let me unless upgrade tp itunes 10, but it needs OSX 10.5. I just want to download some music, not upgrade my operating system. It's not THAT old. Ideas?
As long as you don't need all the bells and whistles of the iTunes Store such as Ping, and don't need to sync an iOS device running iOS 4.x, then iTunes 9.2.1 should work for you. It should be available via Software Update, but if not, you can still get it here:
http://support.apple.com/kb/DL1056
but it would be best to upgrade your Mac to Mac OS X 10.5 or 10.6, since it's probable that eventually the iTunes Store will no longer support iTunes 9.x.
Regards.
P.S. Mac OS X 10.4 was discontinued three and a half years ago, so yes, it's getting rather long in the tooth. Cheers.
Similar Messages
-
My iTunes won't let me connect my iPhone because it says I need an updated iTunes, but when I try to download the new iTunes, it says that my Mac software (10.5.8) is too old. However, there are no software updates available. What can I do?
It depends on what iPhone you have.
If it's an iPhone 4S or earlier, click here.
If it's an iPhone 5, you need to buy a Mac OS X 10.6 DVD, and that requires an Intel Mac with at least 1GB RAM.
(73384) -
I'm Lost!!! I Downloaded Music and now its not on my phone or computer!!! What have I done or need to do!?
I think you can still save that music that you imported from CD to your computer and later suscribe to iTunes Match so that content is also sync in the subscription. I found this article that show you how to transfer those purchases from the iPad to the computer :
Re-download or transfer your iTunes Store purchases from an iPhone, iPad or iPod to a computer - Apple Support
Hope it helps at least a little. -
Help please! Question is in topic. I haven't been able to figure this out.
i guess i just wasn't waiting long enough. after about a half-hour, songs began to update. i hope this is not normal and is only happening the first time.
-
I wanted to use verizon hotspot wifi with my ipad (it searaches for hotspots when ur on the go) but verizon states not compatible with operating system. States that it needs windows 7, Vista, or windows XP. Any ways around this? Any ideas?
Thank you everyone for reaching out and apologize for being unclear. Let me rephrase. There is NO MiFi.
I have an ipad3 and a PC
I am trying to connect the iPad3 to the PC for HotSpotting reason (the ability to use the internet on the PC)
Turning on HOT SPOT on the Apple ipad works GREAT when using it through WI-Fi and through Blue Tooth. But connecting it directly through the included iPad 3 USB Cable to the USB side of the PC does NOT work. I tried several PCs, and several Cables. Any other ideas -
Satellite R830-143 - BIOS update does not support this operating system
Hi,
I received a notification via Tempro that a BIOS upgrade was available. I downloaded the ZIP file (bios-20120209125153.zip), extracted the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.
The package runs, gives the "Extracting files..." progress bar then displays a dialogue entitled "TOSHIBA BIOS Package Ver.4.1.2" that says: "This BIOS package does not support this operating system."
I am running Windows 7 Home Premium 64-bit on a Satellite 830R-143 with the short part no. PT32LE
Does anyone know what the problem is?
Thanks in advance for your help...Notebok Satellite R830-14U (part ? PT32LE) with BIOS 2.70 & EC 1.10
after upgrade Intel Management Engine Interface v.7.1.52.1176 i can not update BIOS - error "This computer is not supported"
http://ru.computers.toshiba-europe.com/innovation/dodriverLanguage=42
The ME Interface provides thermal management for Intel Mainboards. The Intel Management Engine Interface (Intel ME Interface) is the interface between the Intel Management Engine firmware and the host. Drivers and applications on the host that wish to interact with Intel Management Engine through host interface would use the Intel ME Interface host windows driver.
Model: Tecra R850, Portege R830, Satellite Z830, Qosmio F750, Portege Z830, Satellite Pro S750, Tecra R840, Satellite R830, Satellite Pro R850, Satellite R850
Downgade Intel Management Engine Interface to 7.00.02.1164 and/or reinstall Value Update Pack (vap-2011-614162421.zip) does not solve the problem.
What else can I do to fix this problem? -
Biometry not allowed by operating system policies
I have a Dell XPS M1330 with clean Windows 7 Build 7100 using UPEK TouchChip Fingerprint Coprocessor (WBF Advanced Mode), Driver version: 1.2.0.147; Driver Date: 4/23/2009. The hardware is working properly, and I have tried with and without Protector Suite 2009 and receive the same error message: "Operation is not allowed by operating system policies. Try to logon as a different user. I am only using the built-in administrator account with no other accounts; I have looked through GP and biometry is enabled, CLT+ALT+Del is also set correctly. Any assistance would be greatly appreciated.
The built-in administrator account is not supported by Microsoft WBF and in their policy guidance FMAs are advised to inform organizational admins that biometry is unavailable for built-in administrator and guest accounts. However, there is a work-around to the ever annoying:
Error Code: E7210005 "Operation is not allowed by operating system policies."
First, you have to understand how Fingerprint Software works, at least UPEK, Inc. in this case. Put simply, the UPEK software takes your username and password and links that data to a biometric fingerprint which is given its own unique identifier.
Every username created in Windows is also given a unique identifier, a numerical "fingerprint." This is by design and is separate from the Biometry that comes later. Because the UPEK software does not record this unique user identifier or process it in any way, its fairly simple circumvent Microsoft's Built-In Operating System policy:
1. You will never be able to enroll fingerprints in a built-in admin or guest account directly, you must import them.
2. If you are going to use this feature in contravention to Microsoft operating system policy you are going to have to come up with some renaming conventions.
3. Use Windows Key +R (Run) and type "control userpasswords2"
4. Create a new user with a password and admin rights, choose a username that you will want to rename the built-in Administrator account to, i.e. SysAdmin, or Admin etc.
5. Log Off Administrator and log on to the new account. Enroll all the fingerprints you are going to want to use. Then use the application to "Export" to a file in the root of C or some commonly accessible area.
6. Once this file is exported, log off the new user, log on to the built-in Administrator, first delete the newly created user via Run: "control userpasswords2";
7. Next you want to rename your built-in Administrator account in the Advanced tab to the username you just deleted. It must be the same username exactly.
8. Once you have renamed your built-in Administrator account. Log off. Then Log back on.
9. Start your UPEK suite or Biometry application, and go through the Import process. Once you select your exported file for import, you will generally need to enter the password you created for it when you exported it, but its important to remember that you will only be able to use the fingerprints you enrolled under the other user, you will never be able to add new fingerprints to enroll, or otherwise edit the enrolled fingerprints.
10. For office environments, there are 10 slots so a maximum of 10 users could theoretically have biometric access to the built-in Administrator account in direct violation of operating system policy, a very dumb operating system policy. -
Windows 7 Client Operating Systems (Aggregate) reports not working
Hello All,
We are using Windows 7 Management pack in SCOM 2012.
We tried running reports in Widnows 7 Client OS (Aggregate) MP.
There is no data in the report. Do we need to enable any rules to collect data for these reports?
We need Memory related reports in this MP.
We have windows 7 agents and we can performance data in OPS console for those agents.
Thanks!!Verify that you install windows 7 management pack from below link
http://www.microsoft.com/en-us/download/details.aspx?id=15700
You can also check below link to resolve your issue
http://social.technet.microsoft.com/Forums/en-US/54efc509-cbb0-407c-b826-17694cd5f0bc/windows-7-client-operating-systems-aggregate-reports-not-showing-any-data?forum=operationsmanagerreporting
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer" -
Why am I suddenly getting the following error message: "The specified location is reserved by the operating system and is not permitted. Please choose a different location." I've been recording all night and I haven't changed any of the parameters.
Hi Tom,
Looks like we have problem here as we see another blank post from you here. It's probably something to do with your email. Let me send you a PM with my email address and we can communicate that way.
Thanks,
Kevin -
when to install InDesign it says that I am using an operating systam that InDesign nolonger suppor. It is windows XP What shuld I do as I can not change the operating system?
Please answer the question: Will you need to share files with people who have current versions of InDesign?
-
I am selling my Mac Mini. I recently purchased OS X Lion. When I restore to factory settings, how can I ensure that the operating system will still be Lion, and not the original operating system, which I believe was Snow Leopard?
If you bought Lion from the App Store, you can't legally or practically transfer it, because it's tied to your Apple ID. Reinstall the original software from the discs that came with the machine.
-
Hi, I have a mac book pro running mavericks and recently tried to connect to a 3rd gen apple tv but the airplay icon is not showing up in the top bar. I then tried my girlfriends laptop running mountain lion and it showed up straight away. Any suggestions?
How old is the MacBook Pro? AirPlay is only supported on 2011 and newer models, due to the requirements it has in hardware for graphics acceleration.
-
i just got my ipod touch back from a now ex-friend and everything was erased. i mean everything... not even an operating system (or whatever its called) how can i make it useable again?
Connect the iPod to your computer and restore via iTunes.
iTunes: Backing up, updating, and restoring iOS software -
My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?
This is an iPad user to user forum, so you are not addressing Apple. Depending on how many user helpers are on-line, it may take several hours, or longer, to get a response.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
OUI-18001:operating system AIX is not supported.
Hi All,
I am installing my NW 7.0 SR2 system on AIX and oracle 10.2.0.2.
During database installation, when RUNINSTALLER is doing the prerequisite check it is showing me error:
OUI-18001: operating system AIX is not supported.
My AIX system is of version 5300-10-01.
Its very strange that it is giving error for AIX 5.3 ML 10. And in log it is showing that tool is expecting result 5200.004 or 5300.002.
Is it true that for AIX 5.3 ML 10 is not supported for oracle ?
Thanks
SunnyDear Sunny,
As an alternative, you can adjust oraparam.ini file with your operating system version detail.
Please refer the following SAP Notes carefully :
[SAP Note 980426 - Oracle 10.2 Software installation on new operating systems|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=980426]
[SAP Note 833766 - Oracle Database 10g: Software installation problems 10.1.0|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=833766]
I hope this info. will be helpful.
Regards,
Bhavik G. Shroff
Maybe you are looking for
-
How to get value from Thread Run Method
I want to access a variable from the run method of a Thread externally in a class or in a method. Even though I make the variable as public /public static, I could get the value till the end of the run method only. After that it seems that scope of t
-
Query in Order By clause used with UNION
When tryna execute the below qurey I get ORA-01784 - ORDER BY item must be the number of a SELECT-list expression Please help me resolve this asap. SELECT cm_workqueue.WQUEUEID_REF,cm_workqueue.WQUEUEID_CODE,cm_workqueue.mstr_queue_encode,cm_workqueu
-
Please can somebody help me. My iPod keeps saying I need to connect to iTunes and restore. I have done that, but then it says it has been restored and then reverts back again to same message. Any help greatly appreciated.
-
Removal of sub-menus from selection-screen....
Hi experts, When I click on the Test (F8) button in my report. It navigates to the selection-screen. Here in selection-screen, I can see various menus in menu bar like 'Program' , 'Edit' , 'Goto', 'System' and 'Help'. Menu 'Program' has few sub-menus
-
ITunes Connect times out when trying to deploy an iOS app
Ive been trying for the past hour to submit an app via xCode and as it trys to log into iTunes Connect I get a time out error. Is anyone else realizing this issue? Does anyone know whats happening and when we can expect it to be back up? -Scott