I have internet service on iMac but cannot get connection for Blu ray with airport express.

Why am I not getting internet connection for blu ray on tv with airport express?

Which exact model of the AirPort Express do you have?
Did the Blu Ray player connect wirelessly to the Express before or has it never been able to connect to it at all?

Similar Messages

  • We have a Lexmark Pinnacle Pro901 and cannot get the printer to work with airport express - any suggestions?

    Can anyone give us suggestions on how to get our Lexmark Pinnacle Pro 901 to work with airport express? We cannot get airport express to recognize the printer.

    Refresh all your devices before reconfiguring printer to connect to your computer.
    a Shutdown computer
    b Pull out printer power cord from the socket. Let it stay for at least 30 seconds then plug it back.
    c Powercycle your router (unplug your router for at least 30 then plug it back. This will not change the settings of the router. This will just refresh the device)
    d Once router is ready , put back brick at the back of the printer to turn it on
    e Wait one minute
    f Turn on computer
    Repair your disk permission: http://bit.ly/OeD7U3
    Run Cleanup tool http://bit.ly/vnukXY
    Download updated driver from Lexmark website http://bit.ly/ToA1fo
    Run firmware update http://bit.ly/AcNqbg

  • I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network.  I select Extend Wireless network but have no success. Ideas?

    I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal.  The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available.  I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play.   I got the plug, but no play.  I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status.  I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times.  Then wait 45 seconds and the default settings will return.  I did all that, only to find out that after the initial flash of green, green never appeared again.  I got a fast flashing yellow light, followed by the light going off.  Apparently this didn't reset it properly.  So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
    highFly376

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • I have set up apple tv and airport express but cannot get apple tv to recognize the airport express wireless. Any solutions?

    Airport Express set up a wireless network in my classroom.  Apple TV is working but only recognizes the school network.  I would like a solution other than connecting the two with a cable. That would require hanging cables since I am using apple TV to run a video projector.

    Hi there,
    I would recommend taking a look at the troubleshooting articles below and verifying that you have the Apple TV and Airport Express configured properly.
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    -Griff W.

  • My itunes wont let me download podcast to my ipod, and i have a podcast account for bob and tom,  i have them download to itunes but cannot get them to the ipod.

    My itunes wont let me download podcast to my ipod, and i have a podcast account for bob and tom,  i have them download to itunes but cannot get them to the ipod. I dont know if its my my computer or my ipod.

    From a Kappy  post
    The Three Best Alternatives for Security Questions and Rescue Mail
       1. Use Apple's Express Lane.
    Go to https://expresslane.apple.com ; click 'See all products and services' at the
    bottom of the page. In the next page click 'More Products and Services, then
    'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
    ID security questions' and click 'Continue'. Please be patient waiting for the return
    phone call. It will come in time depending on how heavily the servers are being hit.
    2.  Call Apple Support in your country: Customer Service: Contact Apple support.
    3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • I have re-installed ILife '09 but cannot get IDVD to work because it states 'no themes installed', I have re-installed ILife '09 but cannot get IDVD to work because it states 'no themes installed'

    I have an IMac 27".  Had my old HD migrated to my new machine, but cant get IDVD to work. I have re-installed ILife '09 but cannot get IDVD to work because it states 'no themes installed', I have re-installed ILife '09 but cannot get IDVD to work because it states 'no themes installed'

    Did you install the iDVD Extra Content on the iLife 09 disk when you installed iDVD?
    Check in your HD/Library/Application Support folder for an iDVD folder.  In it will be the iDVD themes. 
    Make sure that folder is selected in iDVD's Advance preference pane.
    Also run Disk Utiltiy to repair disk permissions.
    OT

  • I HAVE SUBSCRIBED TO ACROBAT PRO, BUT CANNOT GET IT TO WORK ON MY PC AFTER THE DOWNLOAD

    i HAVE SUBSCRIBED TO ACROBAT PRO, BUT CANNOT GET IT TO WORK ON MY PC AFTER THE DOWNLOAD

    Windows 7 operating system....constantly pops up with a window that says I am not on the internet and can't register my product....obviously I am on the internet at this moment because I am posting on an online forum.   I downloaded the software four times now, after uninstalling it three times.  I downloaded XI Pro. 

  • I have an iPhone 5 unlocked but cannot get a payg nano sim for Vodafone uk. Any suggestions ?

    I have an iPhone 5 unlocked but cannot get a payg nano sim for Vodafone uk. Any suggestions ?

    If Vodafone does not provide a nano-SIM card, there are no suggestions. Not only is the nano-SIM card smaller, it is also thinner, so cutting a micro-SIM card down to size wouldn't be enough to fit.

  • I have changed my apple ID but cannot get my Mac computer to change it on iCloud.  I have signed out but do not know how to sign back in with my new id.

    I have successfully changed my apple ID and password, but cannot get my Mac computer to change it on iCloud.  I have accessed system preferences, iCloud and sign out.  But now I do not know how to sign in using my new id and password.  I would like iCloud to work on my Mac so that it will sync to my iPhone and iPad.  I have installed all of the latest software.  How do I change this account on my Mac?

    Do you have your Mac backed up?
    If not, you should use Time Machine to back up your Mac to an external hard drive just "in case".
    But if all you did was change your existing ID, then deleting the Calendar infomation from the Mac when you sign out should not be an issue. Since it is the same Apple ID, it is the same iCloud account (just with a different name), so your Contacts, Calendars, etc. are stored in iCloud. When you sign back in, you will have the option to sync Contacts, Calendars, Notes, etc. with iCloud - it should already be checked. Just sign back in, and your iCloud info will re-download to your Mac.
    I just tried this, and all of my stuff showed up when I signed back in. Notes took a couple of seconds to load once I opened them, but they are all there.
    Note: If you are signing on with a brand new Apple ID, then nothing will be downloaded because it will be an entirely different iCloud account. But if it is the same Apple/iCloud/iTunes ID with just a new email, then it will all be restored.
    Cheers,
    GB

  • I have just bought Element 11 but cannot get it to recognize Windows Mail as my Carrier

    Previously I used Elements 7 to send photos to friends, but I bought a Nikon D800 Camera, and elements 7 does not support files from that camera, so I bought Elements 11, but cannot get it to access Windows Mail as my carrier. When I try to e-mail photos it only shows Microsoft Outlook or Adobe Mail to choose from. How do I get the program to understand that I use Windows Mail as my carrier.
    Renzo Valle

    Dear Jeff,
    I use Windows Mail all the time and it is the Default e-mail carrier for all my other programs and is the only carrier that I use in my computer. I use Windows Mail with Elements 7, Wordperfect and Word. The only reason I bought Elements 11 was because I had bought this new camera with 36.3 mega pixels, Elements 7 could not handle these files, and I was advised to buy Elements 11, which works fine with these files. I do not understand why Elements 11 did not recognize Windows Mail as my default, and does not give me any options other that Windows Outlook or Adobe Mail. There must be a way to get into this programs setup to alter this, but I cannot find any way which would allow me to do that. Can You help me.
    Renzo Valle

  • I have a hp 3050a printer but cannot get it to connect to my iPad retina display

    New to iPads, but I cannot get my printer to work with my iPad retina display. Printer is an hp deskjet 3050a, it's on the list as being AirPrint ready. I've tried switching everything off & on again. Please help as its driving me mad!

    It sounds like your router may be the problem. Take a look at the thread here:
    http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/ AirPrint-problems/m-p/1792321#M26193

  • Have synced iPhone to iMac but cannot see any Contacts on  iMac

    Am new to iMac. Have managed to sync iPhone to iMac. But when I then open iMac Contacts, cannot see any.

    Thanks, but I don't and won't use the Cloud. When I bought the iMac I thought I could use it with the iPhone 4S. Now I find that I am expected to hand over a lot of confidential information to the Cloud, if I just want to copy my iPhone Contacts to my iMac Contacts.
    Why does Apple want to put such a condition on what is a normal basic principle, of having a copy of my Contacts file ?

  • HT201335 I have just bought Apple TV to be able to use from my Mac book pro  I have upgraded to OSX Mavericks but cannot get airplay symbol ? Any suggestions?

    I have just bought apple TV tp use with my Mac book pro  This has now ben upgraded tp mavericks 10.9.1 but i cannot get an airplay simble on my info bar? What am i doing incorrectly?

    You posted in the iPad forum instead of the MBP forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
    http://appletv2.com/airplay-icon-missing-ios-7/
     Cheers, Tom

  • Sharing internet connection using 4200 speedstream with airport express

    I have xp windows sp2 loaded on a desktop with ethernet connection to a modem and have a macbook pro laptop using airport express. I have to reset the modem to full bridge mode to access the internet when using airport express wireless connection,this disables the connection to the internet on my desktop ( the error displayed is low conductivity through the modem). To get my desk top to work on the internet I have to reset the modem and set it to optus bridge. This allows access to the internet but disables my airport express connecton.
    Is there a way to allow sharing my connection to the internet without reseting the modem.

    G'day mate,
    The SpeedStream 4200 supplied to Telstra BigPond customers is a single user device, connect it to a 'Switch' or 'Router' to share the Internet Service or, replace the whole thing with an ADSL2+ Wireless Modem Router and get coverage all over your house.

  • Connecting wireless blu ray with my wireless internet

    I'm exited to get Panasonic wi-fi built in blu ray dvd player, I'd like to use it mainly for Netflix, Pandora and maybe Youtube videos. I wasn't able to connect to internet. I'm stuck half way, Panasonic tech support gave me 3 port codes and suggested that verizon need to transfer them but when I connect verizon to have them transfer those codes they ask for a whopping $40 bucks, I prefer not to be charged for services they should provide without nickle and dime...long story short is there a solution to this before I return the blueray dvd player. P.S. the dvd player comes with wireless adapter and my wireless internet router supports the WEP authentication and it's Westell Versa Link Model 32700. Hope to get a solution, thanks

    If you visit this page, you can download the firmware for your Westell: http://www22.verizon.com/ResidentialHelp/HighSpeed/Troubleshooting/Network/FirmwareUpgrade/123451.ht...
    Be sure to check the sticker at the bottom of your Westell *BEFORE* you install the firmware as you may otherwise render the router unusable. Once you've downloaded the correct firmware file, visit http://192.168.1.1/ and log in using one of the following Usernames and Passwords:
    admin/password
    admin/password1
    admin/admin
    admin/admin1
    Your Verizon Username and Password
    admin/Modem Serial Number
    From there, choose Advanced, click Yes past the Prompt, click Firmware Upgrade and then click on the box prompting you to upload a firmware file from your PC. Choose the downloaded file and press Upgrade. Give it a few minutes and Do not reboot the Westell! It will reboot itself and come back online if the upgrade was successful.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

Maybe you are looking for

  • Atlantic OTC - Schedule at a Glance

    Atlantic OTC, April 25, 26 Washington Convention Center Early registration discounts for the Atlantic Oracle Training Conference expire on Monday, April 15. By registering early, attendees pay just $300, which is a $100 savings off the Late/walk-in r

  • How to overlap datagrid colums line with item renderer

    Hello guys I been stuck for a few days now and I'm wondering if there is a better way to do this. I put an item renderer on a column of the datagrid. The renderer basically expands the column height and shows some controls. Im using a border containe

  • How do I set my mini to continue playing playlists on youtube?

    How do I set my mini to continue playing playlists on youtube?

  • Report Title in FR Report Header

    Hi, I'm creating a Report in FR which has image on the Left side and Title on Right side in Report Header. I'm creting a report Title for ex. ABC company. I've nearly 20 entities in Column. When i view the report in workspace, it looks fine, but when

  • How do I log in to WLS programatically.?

    Hello All, I'm looking to write a simple java program that logs into weblogic server (10.3) and authenticate a user in this process. I've looked at the API's and find methods like login() but also see snippets of code where environments and configura