I have iPad2 and original iPad. After upgrade to iOS5 neither will connect to wifi network. Network is working as I have connectivity with iPhone and Mac Airbook. What's the problem?
I have downloaded iOS 5 to both iPad 2 and original iPad. I cannot get wifi to work on either. It's not my wifi as I have connectivity with other devices, just not with the iPad. Any ideas?
I'm having the same problem. The iPad has never roamed particularly well between access points, but under IOS6 it doesn't seem to roam at all, it simply sticks with the access point it first connected with.
I don't have a solution for you, unfortunately.
Similar Messages
-
After upgrades Windows 8 to Windows 8.1 my ITunes doesn't work. I have the version 11.1.3
After upgrades Windows 8 to Windows 8.1 my ITunes doesn't work. I have the version 11.1.3, if i start ITunes, i have next window:
iTunes
[Main Instruction]
The iTunes program doesn't work
[Content]
The arisen problem led to program termination of work. Windows will close this program and if there is a known way of elimination of a problem, will notify you on it.
[To close the program]
What i can to do?Hello Lynn,
The article linked below details a number of troubleshooting steps that can help get iTunes to properly recognize your iPhone.
iPod nano: Error message saying that iPod could not be identified properly
https://support.apple.com/en-us/HT203350
Regards,
Allen -
Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1. Win 7 64bit. 2 other users in our office with iPhone 4 and iPhone 4s aren't having this issue. They didn't upgrade to 6.0.1 though. Mail that is deleted or read on the iPhone 4 is deleted or marked read in Outlook 2010. So it's a one-way problem.
Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1. Win 7 64bit. 2 other users in our office with iPhone 4 and iPhone 4s aren't having this issue. They didn't upgrade to 6.0.1 though. Mail that is deleted or read on the iPhone 4 is deleted or marked read in Outlook 2010. So it's a one-way problem.
-
After upgrading to Mountain Lion my 2009 (early 2010) iMac mutes audio when awaking or when it goes to sleep. Anybody else having the problem? My other iMacs are not having that problem. I'm not sure if I am missing an option somewhere or what is going on.
http://www.reedcorner.net/understanding-upgrade-nightmares/ (Thomas)
See if you have supported applications > http://www.roaringapps.com -
I have a non intel G5 and would like to download i-tune songs that I have recently purchased. I have tried everything and can't find the downloads. Did this G5 just become obsolete with itunes? If not what is the problem?
You can do it with Leopard but it depends upon the iTunes version which you did not reveal. Also make sure you are looking in the right place for purchases.
Consider buying a backup drive so you do not need to do this again. If you are going to run old hardware and software you need to live differently because yes, at some time you will find your version of iTunes no longer works. You're lucky it still works with Leopard. As you can see, some versions still work with the iTunes Store but not for repeat downloading.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud, iTunes Match, and iTunes Radio availability by country - http://support.apple.com/kb/HT5085); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple recommends, "... back up your iTunes library. " (http://support.apple.com/kb/ht2519).
Additional tip at https://discussions.apple.com/message/24176756#24176756
Select the iTunes Store on the left side of iTunes if you have the sidebar displayed, or with the button at the top right.
Click on Purchased on the right side under Quick Links (see https://discussions.apple.com/message/26364186#26364186)
You can re-download your available previous purchases. -
My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??
i plugged it and pressed the home button for a few seconds. the connect to itunes screen appeared and the moment i disconnect the cable from the electric plug, it switches off. when i connect the cable to the PC, nothing happens, its as if nothing has been done.
-
Why don't I have my App Store apps after upgrading to iOS5?
I just upgraded my iphone to iOS5. Before upgrading I created a backup in iTunes. After upgrading I restored from backup. All of the apps I downloaded/purchased from the App store are now missing on my iPhone Only the core apps that come preinstalled on iOS5 are present.
However, all the music, contacts, and photos that were previously on my iphone are still there (ie the contents and settings in the core apps have been restored). Also, folders that I had previously put core apps into have been recreated.
Does this point to any error I made in the upgrade process? I didn't transfer purchases from iPhone to iTunes when prompted before the upgrade, nor do I sync apps between iPhone and iTunes. I assumed all this content would be included in the backup.To answer my own question. Yes, the steps I took prior to upgrade were insufficient to have my apps restored after the upgrade. I should have checked sync apps in iTunes or manually transferred purchases from iPhone to iTunes prior to upgrade.
This thread helped with my understanding
https://discussions.apple.com/thread/2681580 -
After upgrading to LION, preview refuses to print out documents to our Ricoh and Canon printers. All other apps work fine with no problems.
Does anyone have similar experience or an answer to resolving this problems.I had the same problem when attempting to print to my Canon ImageCLASS multifunction laser printer. Canon have acknowledged the problem by saying:
"Cannot print from Preview or TextEdit; causes applications to crash. For PDF documents, Canon recommends that the free version of Acrobat Reader is used."
They go on to say:
"An updated driver for each model will be released as a permanent solution. The driver will be an official driver to support Mac OS X 10.7. The target release schedule is approximately three months after Lion is officially released."
Source:
http://www.canon.com.au/en-au/Support-Services/Support-News/Lion-Support
I've followed their advice and have been using Adobe Reader for viewing and printing PDFs. I'll revert back to the Preview app once the updated drivers become available. -
I have just changed my iPad mini password a day ago, and when trying to access it today it worked fine until about 4:30 (GMT) when I could not access the device using the correct password. I am absoloutley 100% sure it's correct.Additional details:I was last using Kik messenger before it stopped working.I was sitting less than two foot away from the PS3 my brother was playing.I'm 14 but I'm not some spoilt kid who gets iPhones and iPads from his parents to mess around with, I have got important coursework and homeworks on there.Any help would be great Thanks.
Hello ConfusedLlama
If the password is not working to get into your iPad mini, you would need to follow the steps to restore it. If you have a back up through iCloud or through iTunes, you can restore from that back up and it would not bring back the passcode unless it is encrypted.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
-Norm G. -
I bought a new macbook pro and now every time i try to buy anything with my apple id it doesn't go through. I tried Ibooks and iTunes but neither one will work. I have registered this computer and even tried unregistering all the other computers but that did not do anything. I also checked my form of payment and that is not the problem either because i have no problems what so ever buying anything on my iPhone or my desktop computer.
It is just this computer.
I try to buy something and something pops up and says... "We could not complete your iTunes Store request. An unknown error occurred (-45054). There was an error in the iTunes store. Please try again later."
And i have been trying later for 2days now.Have you tried repairing disk permissions : iTunes download error -45054
-
I cant seem to figure out how to save pdf's to my ipad in iOS5. I understand they got wiped out with the update but why did the feature go away or if it didnt how do I save a pdf for offline viewing?
Captkenrea-
It probably depends on where you are seeing the PDFs. I had not noticed a change with my iPad.
In Mail, a PDF attachment can be read there, but it also can be "Opened In" some other Apps such as iBooks. When opened in iBooks, it is saved to one of the bookshelves. If you do not see it, press on Collections at the top of an iBooks bookshelf. It may have been saved to a different bookshelf.
In Safari, often you can press and hold on a link or document, and have additional options appear.
Fred -
above
Music is never sync'd back across, its always done manually. Apps should automatically sync back across after you restore from backup.
-
As I select tabs on the Schwab Client Web Site I am kicked out with a message that says I've timed out and must log back in. All version beyond 3.6 have this same problem.
Going all the way back to Firefox 3.0.5 is shear foolishness, it is 14 security versions behind the last 3.0.19 release. And that version is missing at least a dozen security updates that were applied to the 3.5 and 3.6 versions after support for 3.0.x ended.
If you are not happy with Firefox 4, you should have installed Firefox 3.6.17. That is very similar to the 3.0 and has all the security fixes that have been released since support for Firefox 3.0.x ended last year. -
Recently my iMessage has stopped working I don't know for what reason but when I'm connected to my home wifi I cannot sent messages as not delivered pops up in red with an exclamation mark. Other apps like Snapchat cannot be used however it does seem to work when I turn my phone into a portable hotspot using 3G and connect my iPad to it. Regarding my internet browser still works ( safari, chrome, google).How can I fix this problem so I can connect my iPad to my home wifi and having iMessage still work?
*CANT UPDATE
-
my wi-fi has greyed out, how can i fix this?
The WiFi radio has failed. The phone will need to be replaced.
Maybe you are looking for
-
Is there a need to activate Withholding tax functionality when creating or reporting 1099 vendors if there is no tax withheld? Can we just create the 1099 by filling the fields of tax numbers ? Is there anything else that is reqquired for creating 10
-
RRIs in Admin Cockpit do not work properly (only a few)
Hi folks, I'm facing a problem when jumping from a report to a BW transaction. The report "process chain status" redirects correctly to the transaction rspc for process chain maintenance in WebGUI. However the reports "DTP statistics" as well as "Inf
-
I have text file with arabic words. I need to read file (this part is done) and to display some words from file. But it does not shows arabic symbols. How can I make it?
-
I am grabing an image and I am trying to save it. For this I am creating a file and then using IMAQ Write to BMP File but it doesn't work. I suppose that there is something wrong in the way I am creating the file or something like that. Could someone
-
RMAN: -TNS:listener: all appropriate instances are blocking new connections
Hi all, we are trying the some rman recoveries on test machine when we are trying to restore the conrolfile thru rman what they have mentioned in docs id shutdown abort of the target database and then startup no mount thru rman then restore controlfi