I have iPad2. I have lost utube, I have been to setting/restrictions and I still cannot find it. Any help out there. Please
I Am unable to find utube, I have been to settings/restrictions and still I cannot find utube. Anyone out there can you help? Thanking you in advance
The YouTube app is not included in iOS 6. You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google), or try accessing it via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)
Similar Messages
-
I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated
Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.
-
I cannot get my 'pages' to work. I have re-installed i-work as well as downloaded a newer version of OS-X and still...nothing. I have to be able to finish papers and open attachments from email. Any help?
I downloaded OS-X '09 yesterday
Okay, so iWork is version 09 - but I'm not sure what you are referring to with the above - there is no OS X 09.
Did you download Lion? That would be 10.7. Or did you update Snow Leopard (which is 10.6.x)?
What needs to happen is: you need to delete any remnants of iWork (including a free trial if there was one on the computer when you bought it) and reinstall iWork 09 from the disk before you update the OS. After updating the OS and before opening iWork, run Software Update to download/install any updates to iWork. Then repair Permissions (Disk Utility in Applications > Utilities). Then try to open iWork. -
I have a iPad two . Update was ios7.1.1 so I updated to it .when done up dating on the screen appeared a pug and a blue circle that said iTunes . and that's how it is staying .. I try to shutdown did not work anybody out there can help me ????????? ;-(((
Hello Mamoe1,
This screen indicates that the iPad is in recovery mode, and must be restore, as detailed in the article linked below.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Allen -
Just trying to restore my phone, and i have followed all the steps yet none of them have worked. any other ways to do this?
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.
If the above doesn't work, then take it in to an Apple retailer for help. -
I have a dvd in my desk top and cannot eject it any help out there
How do I eject a dvd when there is no icon on the screen?
A couple of other possibilities here:
http://osxdaily.com/2009/08/28/eject-a-stuck-disk-from-your-mac-dvd-super-drive/ -
Hello I have lost my serial number for adobe photoshop elements 13. Bought from John Lewis last month. I did have it installed but had to uninstall but cannot find the any of the packaging etc plus did not register. What is the best way of getting it installed again/replacement? Thanks
Do you have the receipt? If you have proof of ownership, you _may_ be able to persuade Customer Support to help you out. I imagine you would need to scan and email that proof if it works at all.
-
I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!
The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying. -
I have installed a new harddrive, and now I cannot find my adobe programs, like photoshop creative cloud lightroom, bridge and reader
Did you install them on the new hard drive?
-
I have an iphone 4s and there is a prompt that shows the itunes icon and a connection cable i plugged it in and itunes is saying im not connected to the internet but i am....any help out there???
If you are getting a message that iTunes is not connected to the Internet, try looking at this article: http://support.apple.com/kb/TS1490
-
Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?
Is the HDD in the 2009 15" MBP dead? (The original source of your data) If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it. It should show you all of the files you have on your MBP and enable to locate them.
Ciao. -
I have just upgraded to Maverick and now I cannot find certain JPG 's . These files do exist however I can find them manually . I rely on the search facility and this is slowing me down, I am having to trawl through stuff to find the file I want , before I would put in part of the title and the machine would find it.
In addition to what Allen says, you may find these search tools helpful:
http://apps.tempel.org/FindAnyFile/
http://www.devontechnologies.com/products/freeware/ - EasyFind
http://www.osxbytes.com/ - iFileX (note the MacUpdate link provided on osxbytes page has a Malware advertisement forMacKeeper, do not download).
Note: you posted to the Classic operating system forum. That refers to Mac operating systems from 2005 and earlier in Classic mode, and Mac operating systems as boot systems on certain 2003 and earlier Macs. Mavericks forum questions normally get answered here:
OS X Mavericks -
My contacts on my iphone haven't synchronised with my address book on my MAc. Have done every remedy listed and it still doesnt work. Any ideas?
The way iCloud works is that it isn't actually 'syncing', though this is how it's often referred to. The data lives on the iCloud server and is read from there by the various devices (just like webmail). Therefore when you make a change on your iPhone you are actually changing the iCloud website (there is an internal procedure to allow you to make the changes while you are offline, and they are then changed on the site when you next connect).
Therefore any device whose changes appear on the iCloud site, and who can read changes on the site made by other devices, is working: and any device whose changes do not appear, and which cannot receive changes made by other devices which have appeared on the site, is failing to connect. This appears to be the issue with your Mac.
When this happens, sometimes signing out and in again resets the whole setup and corrects the problem. If another device such as your iPhone is connecting to the iCloud server correctly then nothing you do on it will affect your Mac. (In fact even if it isn't connecting it has no effect on your Mac, only on its own ability to transmit changes to the iCloud server). -
I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...
I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...
-
I have an iPhone 4S. I'm using a Belkin tune-cast F8Z498 FM transmitter. Has worked fine for several months. Now I'm getting an "accessory not supported" message. Any help out there?
people repport dirt in the connector can cause this
guess a broken connector could too
Maybe you are looking for
-
How to relate IDOC generated in sap through ALE from legacy system
Hi all, can any one tell me how can relate an idoc generated in SAP with the new idoc generated in a legacy system. I mean how could I identify, which idoc is generated for a particular idoc in legacy system and vice versa. Thanks, Nilanjana
-
Isync will not login with new mobile me, need to change from .mac
I have been trying to sync but my old .mac user name and password are not working now with mobile me. Shows that login is valid but I get an error message - There was a problem with the sync operation. .Mac login failed. I assume that I need to chang
-
Hi Friends, Kindly give me sample programs, for ABAP Memory and SAP memory. TIA. Regards, MARK K
-
Problem in reloading the .lsb file
Hi All, We are using a CIN function to interface an external C code and created the LSB file with required parameters. This was integrated to our LabVIEW code succesfully. Later during the progress of the code development, we've created an additional
-
How to install puppet agent on solaris 10 sparc
I would like to know how to install and configure puppet on solaris 10 sprc