I have IPhone 3Gs what I should do to increase my recent calls days?
I can not see more then two days older calls and also can not see messages beyond 30 days what is the process to get this both things ?
Dax Munno wrote:
I can not see more then two days older calls and also can not see messages beyond 30 days what is the process to get this both things ?
Simple, stop making so many calls. My call history goes back to October 8th, but I rarely make phone calls.
Regardless, neither of these are user configurable settings.
Similar Messages
-
Your iPhone could not be activated because the activation server is temporarily unavailable." I have iphone 3gs , What is the solution?
That's almost always because the phone was hacked to unlock it.
You can not get help for a hacked or jailbroken phone here. -
I have no signal where i live but a great wifi connection and i still cant activate my iphone 3gs what should i do anf i have tried that one troubleshooting article on this and nothing works
well i have tried restarting it and that didnt work i have connected it to itunes but it just tells me i dont have a sim card in the phone (which i do) and i have tried restoring it and that didnt do anything and my error message said "Your iPhone could not be activated because the activation server is temporarily unavalible"
-
i have iphone 3gs and last days i made upgrade 5.01, but i dont know that this version is not avaliable in brasil yet. than my iphone 3gs 32 gb no more find the wide and it be seaching the sinal. what i need to do to back to before situation. thanks a lot
iOS 5.0.1 has been out for a couple months, if not longer.
There was no delay in releasing it in any country.
So what is your issue? -
have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not be detect to my computer? what can i do? please help me..
You can not install iOS 5. It is no longer signed by Apple. You can only install the current version of iOS. For a 3GS, that's 6.1.3.
However... if you have 4.2.1 on your phone, odds are it is not a 3GS, it is a 3G. If that's the case, you've reached the end of the road for that. It can not run anything higher than 4.2.1. -
i have iphone 3gs and it keeps shut dowm by itself every two minutes idunno if this problem related to the battery life or what? please help me solve this problem
See Here for Device continually restarts...
http://support.apple.com/kb/HT1808 -
i have iphone 3gs problem no wifi,no imei,no blutooth,no moderm firmware any solution without hardware ya u do it what charge
This indicates a serious hardware failure.
Take the device to Apple for evaluation and possible replacement. -
i have iphone 3gs But its verson is old 4.1 i want to update it ,,, How can i update plz help me
You use iTunes. Read here:
http://support.apple.com/kb/HT4623 -
I have iphone 3GS suddenly shut down and showing apple
i have iphone 3GS sudden shut down and only showing apple,what to do,i started do do recovery through itones.error 21
that happened to mine but my battery had exploded so just check if your hasnt you tell by taking the screen off the battery should be straight if not its exploded.
-
I have iphone 3gs 32 GB attempt to Reset-Erase all settings now stuck with Apple logo
I have iphone 3gs, i have downloaded free games and apps from app strore installed and it was working fine. i even updated the games a couple of times. Two days ago I attempt to Reset-Erase all settings & Content of my phone. It was stuck with apple logo. till now. What to do? Now it is stuck there and when I connect it to my PC it does not appear there also.
It is just charging and chargning only. when i disconnect it shows battery low.
Help please. Please... Please...............Force the phone into recovery mode & restore it:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. -
i have iphone 3gs my iphone has been updated 6.1.3 version but it's not activate, how i can active it ?
What exacly happens when you try to activate, including any error messagews
How did you "update" to iOS 6.1.3? The current iOS update for the 3Gs is 6.1.6. -
I have iPhone 3GS and it is updated to iOS 4.1.
but I could not download apps because it should be updated to 4.3 iOS.
So I want to know can I update my iPhone to iOS 4.3 and I am from India Hyderabad. So can 4.3 iOS work in Hyderabad.
Pls help me by emailing me on [email protected] & if I can update it then tell me the process of updating my iPhone 3GS.Updating to iOS 5.0 or higher is an erase/restore deal, so, follow the directions here to update your phone:
http://support.apple.com/kb/HT4972
If you chose to update, iOS 6.1.2 will be installed on your phone. -
I have iphone 3gs. I upgraded its software through itunes but it stopped reading sim. Then I restored but since then iphone is locked with message to insert a carrier compatible sim. I've checked my sim, it is ok. How to restore the iphone?
I'm going to make some guesses here. You bought your phone second hand. In other words, not from Apple and not from your carrier. What you got is a hacked phone that was originally carrier locked, most likely to AT&T in the US. You are NOT in the US. (If I get any of this wrong, please tell me).
What has happened is when you updated the software, it was re-locked to the original carrier. ONLY the carrier can authorize an unlock. If it is locked to AT&T, you're out of luck as they WILL NOT unlock an iPhone for any reason.
If it's locked to another carrier, you will have to find out what carrier that is (you can NOT tell by looking at the model number) and find out if they unlock iPhones. If you can't find out, or if they do not, then your only real option is to sell the phone and purchase one from a LEGITIMATE source.
You can find out who the supported carriers are here: http://support.apple.com/kb/ht1937 -
I have iPhone 3GS, no sim-free, and it locked (tried to update to virsion 6.0). How can I unlock it?
What do you mean how can you unlock it? If it was truly "sim-free" it would not have locked when you updated.
ONLY the carreir the phone is locked to can authorize unlocking it. Contact them if you haven't managed to brick it entirely now. -
I no longer have any contractual obligations, and i have iphone 3GS and iphone 4, I want to change carrier, but my phones are locked. Help
I live in Lithuania.
BRContact the carrier the devices are locked to. Apple has nothing to do with this and will not unlock any iPhone for end users.
If the carrier offers unlocking and you meet their requirements, they will then submit the information to Apple to have the device unlocked.
Maybe you are looking for
-
Unable to open Numbers file in iCloud using Numbers 2.3 (iWorks 09)
Using my iMac (OS 10.8.5) and Numbers (2.3), I am unable to open a Numbers file built on my iPad2 (7.1.1) and stored on iCloud. I get an error message indicating that I need to upgrade Numbers on the iMac. The version available to download on the App
-
I have the MS-6728. The manual says "supports FSB 533 and 800 MHz" The Bios setup says my speed is 133. Am I suppose to change that value in Setup to make the board run correctly? Is it suppose to say 533? I think I'm missing basic info and if you
-
Page Publishing Correctly in Safari but Not in Firefox!
Hello! Question: When I publish my page, it looks exactly like it should in Safari but not in Firefox! Why is this and how can I correct this? Thank you!
-
Hi, Version 10204. Please consider the following case. The application is inserting 58K rows into a table and commit and the end pf the process. In another session after insert complete i am running "select count(*) ... " against the populated table.
-
Hi, this seems quite a simple problem, but i can't see asimple solution, if i want to carry out the calculation of x to the power y, where y is a whole number, labview caters for this in two ways, either through the 'scale through power of two', whic