I have iPhone 4 factory unlocked. I was using it. But today suddenly it's showing no service. From 2 or 3 days. Pls help me!!! I m in trouble
Pls apple expert help me. I was using iphone4 factory unlock.
But today it's showing no service suddenly. From 2 or 4 days. Pls help I m
In trouble!!!
What do you mean by Factory unlock ?
Unlocked iPhones are either sold by Apple with no carrier lock or the original carrier has agreed to unlock the iPhone from their network
Similar Messages
-
Hi
My iphone became dead apple not verifying its serial no not the imei so should I throug in dustbinIf it was officially unlocked by the carrier it was originally locked to, then it should have been fine.
If it was hacked in any way to make it function as if it were unlocked, then upon restore the iOS firmware failed to re-install correctly and it is now a brick - so in that case, yup, might as well toss it in the trash. -
Please help!
You'll have to get the SIM card first, you can't set it up without a supported SIM.
-
Plz solve this problem
Hi Chiragsolanki,
If you are having issues accessing your iCloud account, you may find the following article helpful:
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
Regards,
- Brenden -
I have a factory unlocked Iphone 4S, it worked fine but it was often lossing signal and going into search, I decided to restore, but now can not activate it, a message can not be activated because the server is temporary unavailable try again later, I have tried this for 3 days, any suggestions?
yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries -
HT201328 If I have a factory unlocked iPhone 4, can I use it overseas?
If I have a factory unlocked iPhone 4, can I use it overseas? Do I need to change anything in settings?
Your SIM from the US will work regardless of whether it's locked or not so long as you're happy paying the international roaming rates from your carrier.
"Factory unlocked" is a meaningless term. Apple does not use that term at all. Unlocked iPhones can be purchased directly from Apple in the US. Locked iPhones can be unlocked by the carriers.
If you're purchasing a phone from someone other than Apple that's advertised as "factory unlocked", then you are most likely purchasing a hacked/jailbroken phone. Don't do it. -
I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?
I thought that, but I put the sim card in another device that is not Apple and works. Definitely the sim card work, but no longer in my iPhone 5 or maybe in any other Apple device, i dont know why!! But i gonna get a replacement to see what happen
-
I have a factory unlocked 4s I'm having trouble with the mms with straight talk I've been useing the sim swap system with tmobile i have put the settings in five times. The setting won't stay it works for a while and then it's gone. I'm not in a good coverage area but when i put the settings in i make sure i'm getting a good signal or near wifi. any suggestions would be great.
Congrats on your recent upgrade actionkatie! I am sorry to learn of the difficulties you are experiencing with your Samsung Galaxy S4. Let's get to the bottom of this because we want you to love your phone.
I understand you have done all necessary troubleshooting steps that should have enabled you to send messages to iPhone users without them having to disable iMessage. Have you tried contacting Apple Support regarding the inability to send a text message to iPhone users? Apple can be reached at (800) 275-2273.
In addition, do you get a certain error message when your WiFi stops working? Have you verifed that Auto Switch network is disabled? To disable this setting simply to go Settings > Wi-Fi > Tap the Menu Key(to the left of the home button) > Select Advanced and it is called `Auto network switch. If you are still experiencing difficulties, please feel free to reach out to us for further assistance.
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT -
Hi, cant update IO6. After downloading the update and processing it through Itunes on my mac.... and I have a factory unlocked Iphone 4S. Cant update the software. Waring message is say this devise is not eligible for build. Please help.
Download iTunes using the tab at the top of this page. Then run the update with iTunes closed.
-
Hi, How can I delete my icloud account on my iphone? I don't have that email address I was using before anymore and I already tried deleting the account but it is asking for the password and I don't remember it.
Hi ale.vica,
You need to go to Manage your Apple ID, https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/, and sign in with your current Apple ID and password and do the following:
1. Edit your current Apple ID and change it back to the ID which is displaying for your iCloud account. You do not need to verify it - this is only a temporary change
2. Go into Settings>iCloud on your device and delete the iCloud account. Use your current password when your are prompted for a password
3. Once the old iCloud account is deleted, go back into Manage your Apple ID and change your ID back to the current one
4. Go back to Settings>iCloud and sign on with your current ID and password
That should take care of your issue!
Cheers,
GB -
Hi there
I ha
Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.Shame you had the iPhone hacked as O2 usually unlock their customers iPhones happily.
We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
However hint ....you have probably trashed it -
I have a factory unlocked iphone 4s ios 5.1 and let me know if I can upgrade to ios 6?
I have a factory unlocked iphone 4s ios 5.1 and let me know if I can upgrade to ios 6?
The conclusion I have arrived at during the limited time I have been reading indicate that there is a growing number of people complaining about the iOS 6 upgrade. According to Apple tech support they currently have no fix for any of the issues and they indicated that there are a large amount of calls coming in.
-
I've bought in Manassas #356 one IPHONE 5S UNLOCKED to be used in Italy but it doesn't work. HELP ME
On 3/6/14 I've bought in Manassas #356 one IPHONE 5S UNLOCKED to be used in Italy with the italian provider. I've paid it US$ 649. Back in Italy, the phone doesn't work with any provider. I've sent one email to the store not receiving any reply. I've called the store but none accepted to read this e-mail or gave me any solution. This problem has been caused by a mistake done from Best Buy employees and as customer I expect a quick solution from Best Buy.
Hello MassimoMastrocola,
When traveling, it’s essential to have an unlocked phone as each country has different carriers. I’m sorry to hear that you may have received a phone that was tied to a carrier local to the United States. This must be the last thing you want to be worrying about while in Italy, and I’m sorry you’ve had a difficult time trying to receive assistance.
Because of this, I’d like to take a closer look into your predicament to see if I may help. I’ve sent you a private message which may be viewed by logging into the forum and clicking on the envelope icon in the upper right-hand corner.
Thank you for posting!
Alex|Social Media Specialist | Best Buy® Corporate
Private Message -
When I tried to sync my 4G iphone factory unlocked to iTunes I got this message "An update to the carrier settings for your iPhone is available. Would you like to download it now?" Should I hit "Download and Update"? or "Learn More" ?
I have a factory unlocked iPhone 3GS (eg: purchased from Apple). I received the same message at some point and eventually (after reading a bit more) accepted "Download and Update". No problem. No apparent bad effects. It just seems to update things specific to the carrier (Bell Mobility in my case).
-
i have iphone thet he has an apple acount but i don't now her acount and i need help to find a person who was this iphone before me to ask her for a apple acount and password.please help me acount start k,,,,,@k,,,,,.uk if anyone now this person tell me please
Welcome to the Apple community.
Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.
If you have this persons email address, try sending them an email and asking them to remove their ID as described above.
Maybe you are looking for
-
just got an iphone 4 and the registration page is blank. it also says there is a new version available but says network keeps taking time out
-
HT201343 how can i get airplay mirroring
My mac is MACBOOK PRO 15-INCH and how can i get airplay mirroring. It is 2010
-
Search for BAPI to access it throw Java pro gramme
dear all Iam search for a BAPI to be used in search for particular customer using one of its attribute wich is stored in kna1 table and also search in its details stored in ADRC taple if possible. and also BAPI for search for equipment using one of i
-
Hi guys column(below in the SQL) is a Varchar string column. COLUMN has values like ('312049D','312CF45','EDC0645','EDC5679'). Why does SQL2 take more than twice times it takes to return SQL1 . I am learning ways to tune SQL. Please provide your sugg
-
Open from scanner Acrobat 9 pro fails
I am restricted to scanning with Preview because Acrobat 9 collapses every time I try to open from scanner and that causes my Mac to give me a black screen until I unplug the scanner (a simple Lide Canon 70) from the USB port. Any suggestions?