I have iPhone 4, i updated to IOS 7.1 than my Front Camera (Face Camera) when I switch to it, it just blurs the screen and hangs. Any Help please?!
When I switch to Front Camera, it just blurs the screen and hangs. Any help?
I had the same problem. After numerous attemps to Restore from Itunes, I decided to use the "Setup as New Ipad" option. It went through a few question on new setups. Afterwards all my apps, data, photo's were still intact. Which shows that the Restore from Itunes worked. There must be a small bug that prevents the Ipad to open after "Restore from Itunes" . Hope it will help you.
Similar Messages
-
i cannot install update for iOS 8.1.1
it freezes after I click that I agree with the terms and conditions.
same happened for iOS 8.1
i restarted several times the iPad but nothing changedHad the same issue... Saw post on another thread.. you have to be conencted to the internet AND logged into your iCloud account.
Once I logged into iCloud, all worked...
Kev. -
I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows the device but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI and i tried all the stuffs that has been written in the manual. Plese give me the Proper suggetion about this issue..!!
If your router is not identified in a national database (don't recall who maintains it or where it is) then there is no location associated with it. Hence your device cannot be located. I suggest you try your test at some public wifi spot, like a bookstore or coffee shop. These places usually have a location associated with their wifi router.
-
I am not able to open any app on my iphone. While i'm trying to open an app it just shake the screen and it does not open and remains in the same screen. It worked fine until I charged the phone this evening. After that suddenly I'm facing this. Please can anyone help me to recover this issue? pls!
This is covered in the basics section.
A restore loses nothing.
A restore does. If you are using the iphone as designed, then everything should be on your computer. -
Hi - I'm trying to sync iBooks on my Macbook Pro with iBooks running on my iPad. I have some pdf's download from the net I want to share between devices and I can't work out how to sync the two devices. Any help please? I'm running Mavericks
Thanks for your help Brij011 - much appreciated. Apologies as I'm a newbie but I've looked at the info for synching and I appear to have all the switches flicked on my iPad. Does the iPad and iBooks only sync in iCloud for purchases as I appear to be doing something wrong. I could sync ok when books was in iTunes but since migrating to Mavericks I think I'm doing something wrong!!
-
I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?
I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?
-
when starting firefox, it flashes for one second on the screen and disappears.
Hey rsmccown,
Have you tried starting Firefox in Safe Mode? Hold down "shift" while Firefox is starting up. If the crash doesn't happen in Safe Mode, you should read [[Troubleshooting extensions and themes]].
There is also a lot of useful stuff in the [https://support.mozilla.org/en-US/kb/Firefox-not-start Firefox won't start] Knowledge Base article. If you've recently upgraded, you might want to check out [https://support.mozilla.com/en-US/kb/latest-firefox-issues#w_firefox-crashes-when-i-start-it this article] as well.
Hopefully this helps! -
I have 3 ipads with ipad 1 and 4 i can see near all videos from facebook but on the ipad 2 is asking for adobe flash player and its the same video that i watch on the other ipads ! Any help please
Adobe has not made a version of Flash for the iPad.
Kappy explains why. https://discussions.apple.com/message/19446567#19446567
5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
Top 4 browsers supports flash player on iPad and iPhone
http://mashtips.com/flash-player-ios/
Cheers, Tom -
hi i am selling my ipad and have erased all content and reset it and now when i switch it on it just shows itunes logo is this correct?
start iTunes,
plug in your USB cable
switch off your iPhone
press holding home button(the round button in front of the Phone)
plug it on to the USB cable
keep holding the button
till iTunes says it found a iPhone in recovery mode
then click restore as a NEW iPhone
then sync!?
http://support.apple.com/kb/HT1414 -
I have iPhone 5S after updating to IOS 7.1.1 my camera stopped working!!!!
After updating to IPS 7.1.1 my camera stopped working, it's just a black screen.
Hello Darth Evans,
The troubleshooting steps below can help get your iPhone's camera working again.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen -
I accepted the latest 8.3 iOS upgrade last night which resulted in my not being able to turn on the iPad.
Following the troubleshooting guidelines I can get as far as the black screen by forcing a restart (holding both buttons) all I can see is the diagrammatic picture of the charger and the iTunes red logo. I cannot move on from here and the instructions indicated that a message should show offering the iOS upgrade - but this is not happening for me!
If anyone can help it would be hugely appreciated - many thanks.
I think we have an iPad 2 (approx. 2 years old)
TraceyThank you for using the Apple Support Communities
It sounds like your iPad is in recovery mode after an error in the update process that may have occurred. The solution to this would be to plug it into a computer running the latest version of iTunes and press the restore button. This will ease the iPad and reinstall iOS. Hopefully you setup an iCloud or iTunes backup for the device. -
when I try to drag icons accross the screen thet are sticking for up to 10 seconds. I have just done a recovery (reformatted and reinstalled the OSX 10.8.5 but no change. The activity monitor shows nothing out of the ordinary. I have a MacBook Pro 2012. I am having perfomance isues with ProTools and I'm wondering if the 2 are connected. I installes TechTools 7 and ran tests on everything and it says all is good. Any idea's? Thanks!
JimIf you haven't already done so, eject the card by dragging its icon to the Eject icon in the Dock (where the Trash icon usually is.) Make sure the write-lock switch on the card is in the unlocked position. Then reinsert the card and test.
If there's no change, and the same happens with more than one card, the card reader is stuck in write-locked mode. I don't generally advise do-it-yourself hardware repair, but one ASC member managed to fix this problem. I haven't tried the fix myself and I can't offer any guidance beyond what's in that discussion. If you cause damage, don't expect your warranty to cover it. I suggest you instead make a "Genius" appointment at an Apple Store. -
water damage iphone 4 was coming on when plugged in but not charging and not holding any power so changed battery it then worked untill battery power ran out and would not charge so changed the docking port and now it comes on with apple symbol and switches back off after 10 to 15 seconds like its rebooting and then just keeps repeating any help please
Help with what? Apple does not repair iPhones, they replace them. Apple does not sell parts. There are no legitimate sources for iPhone parts.
Talk to whoever did the initial repair. Odds are the logic board is damaged. It's probably time for a new phone.
Your phone is no longer eligible for a discounted out of warranty replacement. -
my iphone was charging and turned off and wont turn on now even when it is connected it will just turn on just the apple and turn back off
steps665 wrote:
..., the problem is that my Sleep/mode button does not work.
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is Required...
Be sure to make an appointment first... -
My iPhone 4S after Update to IOS 6 Wi-Fi Not Working
My iPhone 4S after Update to IOS 6 Wi-Fi is Off ( Not Working ) But When i Downgrade to 5.1.1 Wi-Fi is Working. I Could not figure out what is the issue. Does any one Facing the same problem. or Have Solution.????
The iPhone is not JailBroken. what I did is, on Thursday i:e 20th Sept. opened itunes and Restored (Restore + Alt ) By selecting the 5.1.1 firmware file from Itunes LIbrary.
Maybe you are looking for
-
In the last month I have had a lot of trouble with DVD/CD Combo Drive. When I do a Fresh Install from DVD or CD there is no Problem, But when I want to Play DVD then it Stalls usually using Ubuntu and VLC. How can I check it Online? We had severe Dus
-
2011 Mac Mini HDMI only 2Ch Stereo
Wow is this frustrating. I've had my Mac Mini for about a week, and for the life of me, cannot get surround sound working via HDMI. I've read so many posts about people with this problem but I can't find a definitive answer for a fix. All I want is f
-
Using XSL to map and recieve an error in sxmb
hello I have XSL mapping, and I recieve this error in the sxmb. any suggestions? error message: <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!-- Call Adapter --> - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP=
-
Print Preferences - not saving with report in CR2008
I have CR2008 FP 2.7 when I go to print --> preferences and set things like the paper output size and set it to staple the pages these settings do not get saved with the crystal report. The next time I go into designer all of these changes are gone.
-
Hi, I want to make a gallery on my homepage but I get a message telling me I have to pay for the service. I have already subscribed for a year, punched in a username and password but apparently this is different from my Apple ID and therefore it is r