I have Iphone 4s from UK. I am using turbo sim (R-Sim) in it. I was able to surf net on 7.0.4 , But as i updated to 7.0.6 it is not connecting to net , I am able to make calls and messages , my network is also showing VODAFONE 3G
Please help me as I am not able to connect to the net. My I phone shows carrier as EE 15.8 but is working on calls and messages. Do I need to remove the turbo sim while restoring. as I am not getting the option for carries as I use to get it before...
You have hacked your phone with Turbo SIM. You cannot get any help here for hacked phones. Contact the place/person who sold you the SIM. Surely, they have support services, don't they?
Similar Messages
-
In "do not disturb" mode, I need it to never silent calls and messages
Hello,
I'm trying to figure this out, not that I'm on call again. Since "Do Not Disturb" has been out I have had my phone set to auto turn on nightly. Allowing Call and messages to come though. Thinking that was the case I never thought anymore of it. Last night I got a high ticket and miss it because it was in "Do Not Disturb".
So even thought it's set to allow all calls they still get blocked? Is there was to have the IOS7 Silent feature turned off. I have e-mails and other crap getting push to my phone for my pebble so I don't want to turn that off, just make the quite at night.
Am I SOL?
Any info on this would be great.Hi,
You can turn the email arrival sound off in the settings. Thus you can still get phone calls but no email arrival sounds. more over, you can turn the notification for the emails off (at least make it no sound).
And I think do not disturb just mutes the rings for text or calls. it doesn't actually blocking them.
Hope this helps. -
I have iphone 4s from sprint and its motherboard is damaged so please provide me what to do it is not in warranty and i am in India now.thanks in advance.
No, the logic board needs to be replaced. But, here's your ptoblem: No authorized service center, In India, will touch a US iPhone. Thus, your only option is a third-party repair shop. But, since Apple does not sell iPhone parts, many on the market are counterfeit. In other words, if you go to a third-party repair shop, you take your chances as to what you end up with.
If you can't send the phone to someone in the US, that can go to an Apple store for you, & do an out of warranty exchange...cost is US $199...then sell the phone for parts or go to a third-party repair shop & hope you don't end up worse than you are now.
Those are your options.
Good luck. -
If I am connected to Wifi and send an iMessage to a party that is not connected to the Internet then he doesn't receive the message. How do I force my iPhone to send an SMS instead?
It is an interesting option but I am not sure how it works. I disconnected the other party Wifi and 3G on the iPhone, iPad and computer. I sent the iMessage 15 minutes ago and it doesn't give the small foot print "delivered" but equally said I didn't get the RED exclamation mark on the right hand side of the message in BLUE. So we know that the message was sent but not delivered. I don't seem to have the option of sending by SMS when I tap on the BLUE message and hold.
-
Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService
All the Exchange 2013 Prerequisites appeared to install correctly. The installation of Exchange 2013 on Windows Server 2012 hangs at Initializing Setup. Then I find event 4027, source MSExchange ADAccess in the application event log. The
same thing happens if I try to prepare the Active Directory from the command prompt. The old Exchange 2007 server and Active Directory Server are on the same network and all firewalls are off. The entire content of the event is below. Any ideas
appreciated.
Log Name: Application
Source: MSExchange ADAccess
Date: 1/30/2014 12:47:01 PM
Event ID: 4027
Task Category: (1)
Level: Error
Keywords: Classic
User: N/A
Computer: MAILSRV2.sescolighting.com
Description:
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetupUI.exe
3868
Get Servers for sescolighting.com
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.0038715. TCP error code 10061: No connection could be made because
the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient()
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange ADAccess" />
<EventID Qualifiers="49156">4027</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-01-30T17:47:01.000000000Z" />
<EventRecordID>821</EventRecordID>
<Channel>Application</Channel>
<Computer>MAILSRV2.sescolighting.com</Computer>
<Security />
</System>
<EventData>
<Data>ExSetupUI.exe</Data>
<Data>3868</Data>
<Data>Get Servers for sescolighting.com</Data>
<Data>TopologyClientTcpEndpoint (localhost)</Data>
<Data>3</Data>
<Data>System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.0038715. TCP error code 10061: No connection
could be made because the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient()
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)</Data>
</EventData>
</Event>
Tina M. White Boundless DataHello,
Please make sure whether you install exchange 2013 on a DC server. If so, we don't recommend you install Exchange 2013 server and DC server on a server.
Please use ping to check if the server you will install exchange 2013 server on can communicate with DC server.
Please use telnet to check if 890 port is opened on your firewall.
Besides, please refer to the following article to check if you have installed required components again.
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
Cara Chen
TechNet Community Support -
Like idk how to ask but would anyone know why my iPod touch 4g will not connect to a computer to my apple account but yet it will only charge I have tried numerous cords and pc's and still the same occurs
Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
My ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wifi.
- Reset the iPod. nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
My texts have stoipped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose texts are not getting through. We have both restarted our iphones but the problem continues.
Have you talked to your carrier (or your friend to his)? Could be an issue at their end.
-
i have iphone 4s from japan which is a carrier locked (kddi ) it has ios 5.1.1 and now i want to upgrade to ios 6.Can i do the software update or it will cause any harm???
If you have a Japanese iPhone and are using it with any carrier other than Softbank or AU, then it was hacked, since as the others have said neither of those carriers unlock iPhones. Therefore if you upgrade iOS or restore your iPhone, it will lock back to the original carrier and be unusuable with your current cell provider.
We cannot help you with jailbroken iPhones. You'll have to look elsewhere for further assistance.
Regards. -
I've lost my iPhone5 like 40 hours ago. I already turned the Lost mode on with Find my iphone app. But my phone has no data plan so it could not connect to the internet at all. I reported to the police, too. What else can I do? Can anybody advise?
No...see the link I posted:
If you did not enable Find My iPhone on your missing device
If you did not enable Find My iPhone before it was lost or stolen, you can't use it to locate or protect your device, but you can still follow these steps:
Change your iCloud password to ensure that no one else can use your device to delete or make changes to your iCloud data.
Report your lost or stolen device to local law enforcement and your wireless carrier. Apple doesn't track or flag lost or stolen products, but you can use My Support Profile (supportprofile.apple.com) to find a list of serial numbers for products that you've purchased or registered with your Apple ID. -
I am trying to update my iphone 4 icloud but I keep getting can not connect to server when I click on the terms and conditions
" iTunes could not contact the iPhone software update server because you are not connected to the internet. Make sure your internet connention is active and try again."
-
my iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display please advise me a corrective action...
Take it to an Apple Store and see about getting an out of warranty replacement. I believe it will run you about $150.
-
Hi i have a iphone come from japanese i cant use in belgium because its locked how can i unlocked?
hi i have a iphone come from japanese i cant use in belgium because its locked how can i unlocked?
Did you sign up for a cellular service plan when you purchased the iPhone?
You'll probably have to contact the carrier.
Take a look at this Apple doc for all the details -> iPhone: About unlocking -
Hello I have iPhone 4s, i'm trying to use the service under messaging called text message forwarding it's asking for a code from my iPad. What code?
I am getting iMessages going to my iPad but not my iPhone. I am hoping this feature will fix my issue. However I do not know where to get the "code" from my iPad.
any idea?
thank you
I Have the 4th gen iPad, iPhone 4s and the latest iOS updates on both.Chrisj4203, thank you for your kind answer.
I have done a lot of restores to the Iphone, and resets also.
I;ve done holding both buttons as you sugested, but there is no signal appearing.
I am in Uruguay, South America and the original company is Movistar ( Telefonica) and the new sim card is from ANTEL ( the officail and biggest company in my country).
I don;t knoe what todo.
I have been trying for more than one mont.
I have gone several times to both companies. Aldo two times to Apple uruguay, and nobody can help me. -
Can I charge my iPad mini and/or my iPhone 4S from 220 volt outlets using just the correct plug adapter for the country, without a power converter?
Not staff or owner by a long shot.
I just know that anecdotally I have seen people reporting issues with their mini's charging. Is there a real issue or not? I don't know. Not a day goes by that a person doesn't post here complaining that their iPad won't charge and it turns out that they're trying to do it via USB or with the iPhone block.
But while there are a lot of user fixes sometimes it's good to have the pros take a look at things,and at the very least document that there has been an issue.
the four main reasons an iPad won't charge (beyond being plugged into a USB port)
Bad cable
bad outlet
bad brick
rule those out and it leaves issue with the iPad.
Maybe you are looking for
-
Flashing marker does not appear in search box when starting Firefox
When I start Firefox the flashing marker does not appear in the search box. If I reload this sometimes sorts the problem
-
Formulars with pictures in numbers
Hello, I need help... I´m creating a list with contacts in numbers and I want that when I´m choosing a name from a list that in a different cell automaticly the picture of the person appears. I was trying arround with the look up formulars but it´s n
-
I cannot reset my user account password...
After upgrading to Lion, several old user accounts appear on my login list (all of which are administrator status.) I tried to save the settings to automatically log in to my most current account, but the password does not match, and I think I will
-
Broadcasting challenge with 3.5
Hi All, I've got a challenge concerning Broadcasting in BW 3.5 I'm trying to find functionality or a workaround to make it possible to produce masterdata-specific (fill in the variable using masterdata) reports and broadcast them to an e-mail-address
-
I started another thread about this but have had no replies. I know this means no one has a fix, but it would help a lot to know the answer to this question: Is anyone currently syncing calendars - iCal or Entourage - to an external device, particula