I have iphone5. should i install ios8 before starting to use iphone6

Should I install ios8 on iphone5 before syncing my new iphone6 which has ios8

There's no need to do so, but you should make an iTunes or iCloud backup first.
You can restore a backup from an older iOS device to a newer iOS device (i.e., I can restore an iPhone 3GS backup that was using iOS 6.1.6 to an iPhone 5 running iOS 7.1.2).
If this wasn't possible, then people would never be able to upgrade from an iPhone 4 to an iPhone 6, for example, and still have all their data.

Similar Messages

Why should be install CI before Database Instance

Hi friends,
<b>Why should be install Central Instance before Database Instance??</b>

Hi
At first, Database Instance Installation doesnot mean that we are installing the database software. Aa we know that Database software must be installed first before starting SAP installations.
In SAP Database instance installation, the required Database schema is created for the SAP Central Instance we have installed first and all the configurations between SAP and Database are done at this process.
If we try to intall the DB Instance before CI then it would give error because for DB CI is prerequisite.
Technically, whole of the file system have to be configured before schema creation from which SAP would fetch the data and informations.
Hope this would help you in clarifying some doubts.
Thanks

Should I install bootcamp before doing a system migration?

I have a new macbook pro I am setting up and an older one with bootcamp and parallels installed. Should I install bootcamp before I migrate my files or does it not make a difference?

You can install Boot Camp whenever you want. It will be the same if you do it before or after migrating your data because it doesn't affect to Boot Camp

Should I install Apache Web server to use Jakarta Tomcat Servlet engine?

Hello,
I have some problems and now have a question:
Should I install Apache Web server to use Jakarta Tomcat Servlet engine?
JTK home page is available via http://localhost:8080
Tomcat ver 3.1.3
Thanks.

No, you don't need to run Apache webserver (httpd) to run Tomcat. Tomcat by default runs on port 8080, but you can set it to any port, including 80, if you have permission to do so (on *nix systems, you need root permissions to run services on any port below 1024).
Tomcat is a webserver as well, just one that includes a servlet container and JSP processor. So it will serve your html files, images, etc (aka static content), just as well as Apache httpd, in addition to being able to run servlets and JSPs.
Apache httpd has more options for serving static content than Tomcat, so many people prefer to use it as their main webserver and only use Tomcat as a sort of "plugin" to handle servlets and JSPs. This can be achieved through a connector. Instructions on how to set this up are on the Jakarta website.
So you could use Apache and Tomcat combined, next to each other, or totally separated. In many cases, just Tomcat will do.

I have changed cartridges, re-installed drivers, re-started computer. Still pages come out blank

I have changed cartridges, re-installed drivers, re-started computer, aligned cartridges, cleaned printer head. Still pages come out blank even when just making copies. What else can I do?

Please read this post then provide some details. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? Are there any error messages on the printer or computer screen?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Microsoft word will not open .docx documents please help I believe I have been able to open these before I am using Office for Mac.

Hello,
I am unable to open .docx seemingly all of the sudden. These documents are now defaulting to pages. I believe I have been
able to open these before. I am using word in Microsoft Office 2004 for Mac. Please advise.
Thanks
Troy

Do a Get Info (command - I) on a docx document, unlock the padlock, and change the open with to Microsoft Word. Then click change all.

Should I install JMF before my program?

Before installing JMF, I run JMFInit and got this ...
java -cp jmf.jar JMFInit
DirectSound Capture Supported = false
JavaSound Capture Supported = true
JavaSoundAuto: Committed ok
After I installed JMF,I got this...
java -cp jmf.jar JMFInit
DirectSound Capture Supported = true
DirectSoundAuto: Committed ok
JavaSound Capture Supported = true
JavaSoundAuto: Committed ok
Found device Microsoft WDM Image Capture (Win32)
Querying device. Please wait...
and UnInstall JMF, It looks like before,
I develop a program for audio via RTP,
and just copy jar file for my program,
but according this result, I can not get MediaLocator "dsound",
Should I ask all users install JMF or there is another way to solve this problem.

First is why not to use javaSound?
Second: Reliable capture uses native modules in JMF performance packs.
jsound.dll, 4example, on Win. And you need to register(commit) devices - so you have to run JMFInit (.exe, or .class) on client, and not under Applet.
Shortly: you need to have native modules jmutil and jsound (.dll in System(on Win95-98) )or in System32 (on WinNT) ) on client, you have to threat client to run JMFInit, and you need to allow capture in applets, if you want client to record sound in applet.
P.S. Allowing capture in applets could be set by any code such as
import com.sun.media.util.JMFI18N;
import com.sun.media.util.Registry;
import java.io.*;
class AllowCapture
public static void main(String args[])
Registry.set("secure.allowCaptureFromApplets", new Boolean(true));
try
Registry.commit();
catch (IOException ioe)
System.out.println("Could not commit.");
But! Code does not run (of course (= ) in applets x)
So, in closing, easier to persuade cloent to install JMF, than install JMF manually :)
But your "minimized" JMF would be size of about 1.5 mb against nearly 6 mb of JMF.

Reformatting- SHould I install SP2 before drivers?

What order shoudl I install these?
DX9
Mainboard Drivers (including ethernet to get online)
SP2
Audio/Video Drivers
???

Quote
Originally posted by RLiu818
Quote
Originally posted by Strijker
Quote
Originally posted by Rutar
WINXP
SP2
DX
Mainboard
video
other drivers
DX9.0c is integrated in SP2..
and I prefer the following order
WinXP
SP2
Microsoft update website
Mainboard
Video
Dx
other drivers
Microsoft update website
you say DX9 is already included in SP2? THen how come you list DX after after Video.
for the future when 9.0d comes out

Is the security encryption in Mozilla browser 128 bit or higher? I have a site that requires confirmation before I can use it.

Just an information question, not a problem. A site that I want to use on line securely to transfer funds requires that I confirm that my browser supports or has 128 bit security encryption. The site offers to check my browser, which I did and it comes up saying that I don't meet 128-bit security encryption standard or something to that effect. I believe I have the latest version of Firefox/Mozilla installed -- updated just last week (Sept 8th, 2011).
Does this browser have 128-bit security encryption?

Firefox versions since Firefox 2 in in 2002 support AES-256 as you can see used on this forum.
*https://developer.mozilla.org/en/Security_in_Firefox_2
*https://www.fortify.net/sslcheck.html

Recommended configuration tasks before starting to use the system

Hello,
I am a real Mac Newbie, just got my first Macbook Pro ...
On Windows-systems, there were several config-tasks that should be done at first done before doing anything with the system (data migration) ... like creating partitions ... generally speaking, tasks that cannot/shouldn't be done later.
Are there any similar tasks, that should be done in the very beginning (besides software updates)?
I also did a search in this discussion forum, but couldn't find anything. If I missed it, please let me now the link.
Thanks in advance

Like Roger says there aren't really any software-related "configuration tasks" that have to be done with a Mac, at all. Just use it, close it when you're done, and open it again when you want to use it again. Things are simpler on a Mac. I admit that it might take a little while to get yourself used to the idea, but you'll find its much better once you do.
One thing I'd like to add is that it can be a good idea to calibrate the battery on your MBP just after you get it. This works in the battery a little and makes sure that you'll get the most accurate readings from the battery life menu.
I can't really think of any tasks that have to be done when first getting a computer that can't be done later... Just enjoy the machine! And if you have any other questions, don't hesitate!
--Travis

I just purchased a bb 8330 and i want to install 5.0 os on it should i do it before or after i activate it?

I just bought i new blackberry 8330 and i want to install 5.0 os on it. I have sprint as my carrier and i dont know if the allow 5.0 on their service. Should i install it before or after i activate it, or does it not matter?
also how long will it take when i install it on my blackberry with no personal settings and should i back-up my blackberry before i do it even though i have nothing saved on it?

anthonylo803 wrote:
I just bought i new blackberry 8330 and i want to install 5.0 os on it. I have sprint as my carrier and i dont know if the allow 5.0 on their service. Should i install it before or after i activate it, or does it not matter?
also how long will it take when i install it on my blackberry with no personal settings and should i back-up my blackberry before I do it even though I have nothing saved on it?
Hi and welcome to the forums!
I would activate it first and get used to the basic operation.
The upgrade will take about an hour to be on the safe side, and yes always take a full backup before
any upgrade. The link below will provide you with your carrier's website for downloading the Blackberry
device OS. Do you have the Blackberry desktop manager installed? What version is it?
Also attached is the upgrade procedure.
Thanks,
Bifocals
KB03621
How to use the application loader tool to install BlackBerry Device Software
Carrier support page
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

I have just started with Logic X, having been a Logic 8 user for many years. I have some expensive plug-ins which are not being recognised by the news Logic. Where should I install them ? YoursdisillusionedbyLogic

I have some expensive plug-ins which are not being recognised by the new Logic. Where should I install them ?
I am using Mavericks OS, and I am considering transfering my choiceof DAW to Protools.
YoursdisillusionedbyLogic

Hi
LPX only supports 64bit Audio Unit plugins. You probably need to get the latest updates for all of your plugs.
Some plugs are not currently available as 64bit versions: you may want to try
http://www.soundradix.com/products/32-lives
CCT

FF4 - Add-ons Manager opens with message: "You don't have any add-ons of this type installed" when I have 25 add-ons installed and usable

Mac/FF 4. Title says it all:
When I go to the Add-ons Manager in FF4, no add-ons are listed, but I'm using the browser and all of my add-ons are available everywhere they're supposed to be.
I have 3.6.16 installed in another directory which uses the same add-ons.

https://support.mozilla.com/en-US/questions/826729 has a solution for the problem

My iPhone 5S always asks for my iTunes password before i can use my fingerprint

I have set my iPhone 5s up, i use the fingerprint sensor to unlock and dowload apps etc, i have gone in to settings, general, Touch ID & Passcode, Touch ID and selected to use the finger print sensor for iTunes & App Store, i put my password in etc, yet every time i try to download an App i have to input my password again before i can use Touch ID! Why??
Just what is the point of setting it all up, when it is obvious that the Touch ID is not 100% trustworthy, has the password would only need inputting once if it was!
Really not happy with this repetitive cycle, i may has well of stuck with my iPhone 5, than waste my money on a gimmick!!

I would try a reset, hold the power button and home button until you see the apple if possible or hold for about 15 seconds then let go. If that does not help, I would restore it through itunes on your computer.

Code to wait until one event is finished before starting another?

Hi all,
Coding isn't my strong point but I have a basic understanding of how functions etc work.
I've been learning about referencing symbol timelines with the awesome tutorial from the Adobe Blog, included below.
http://blogs.adobe.com/edge/2012/07/18/tutorial-leveraging-independent-symbol-timelines/
I've been able to get my symbol to play from a certain part of it's timeline depending on whether the mouse is rolling in or out but now I'm a little bit stuck.
The mouseover event triggers an animation and the mouseout triggers another animation that starts from the same frame that the mouseover animation ends with.
The problem is this. If I move the mouse quickly over the buttons, the first animation will play halfway through and when the mouseout triggers the second animation, the first animation will seemingly "skip" to the ending and move straight to the first frame of the second animation.
I know enough to code it so that the second animation will check if the first animation is still playing before starting by using an else/if statement. Using this method I only know how to skip the second animation if the first is playing but that isn't really what I'm looking to do.
Here comes the question; can anyone explain to me how to create a wait loop in Edge Animate?
When I say wait loop, I am talking about code that will check a variable and perform an action if the variable is true OR loop back to the start of the function if the variable is false (to check the variable again).
The behavior I am trying to achieve is somewhat like queuing the second animation so that it will "wait" until the first animation is played before beginning the second animation.
Any ideas?

Ok Mr Doon,
Clearly, I read to quickly
The behavior I am trying to achieve is somewhat like queuing the second animation so that it will "wait" until the first animation is played before beginning the second animation.
So, say the anima symbol is a 2s animation and has autoPlay set to false. There are two instances anima-1 and anima-2 on stage.
The event handler anima-1.mouseover starts the first animation :
We select Stage in the code panel and place before the first Symbol.bind… the declaration for two symbol (stage) variables :
Inside the anima timeline, click the top left bullet+curly brackets icon and select complete : when the animation is complete, we set the boolean variable (what is not very clean here is that this is done for the two instances anima-1 and anima-2) :
The event handler anima-2.mouseover starts the wait loop, by calling a function defined at the stage level :
More precisely, the function is defined in the document.compositionready handler. It defines (and stores in variable waitLoop in order to be able to remove when finished) an interval, that is the repeated call, every 10 ms, of an inner anonymous function.
The latter simply tests the boolean and when its true
- starts the second animation ;
- clears the interval.
You can download the example here : https://www.box.com/s/6yxjfmrqd0b5zbhmd3lx
You can hover over the left rounded rectangle, and immediately after over the second one. Subsequent rollovers are not handled, but it gives you a possible logic to adapt to your particuliar problem (that I still do not understand completely : it's hard without seeing).
Gil

I have iphone5. should i install ios8 before starting to use iphone6

Similar Messages

Maybe you are looking for