I have ipod 4 touch. 3yrs old. when i plug in it isnt charging. it gets switched off after the charge gets over. then it charges and again switches on. dont know how to solve this problem.. please help
IPod 4 touch. 3yrs old. Not charging when plugged in. But charges when the battery gets drained. when battery gets over I keep it for charging. It switches on and doesn't charge.. Plz help!!;;
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Similar Messages
-
Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me
Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue. -
my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?
Don't worry, just follow these steps to fix iPhone stuck on Apple logo
=> First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
=> Now install the iTunes application in your System and connect your Device with computer via Data cable
=> Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
=> Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
I hope that will surely
Thank you... -
How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"
I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
So far the problem with the 64 bit side of it is still to be resolved.
Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
Craig -
Hi my iphone 4 is disabled how can solve this problem? help me please
hi my iphone 4 is disabled how can solve this problem? help me please
What do you mean by "disabled"? Disabled by entering the wrong passcode? If so, you'll have to force the phone into recovery mode & restore it to get it working again & remove the passcode:
Turn your phone off, then force it into recovery mode & restore it:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. -
I have downloaded MAMP for Mac and want to use it for working with Wordpress. I'm on an Imac with Maverick OS 10.9. I had mysql installed before this and would like to uninstall it and use MAMP. It was easy to turn off Apache and PHP but don't know how to uninstall mysql. Please help!!
It depends on how you installed it. You have to shutdown the MySQL service first. If you used the standard, but obsolete Startup Item, you can do that with the Startup Item. If you created a launchd script, you can do it with launchctl. Once MySQL is no longer running, you can delete the Startup Item or launchd script and the rest of MySQL.
-
After I upgraded to ios6 , my iPad gmail was something wrong because it always hang and switch off the App automatically . It is very irritating . Please let me know how to solve this problem because I have to read my email everyday . Thanks .
Double tap Home button, delete Mail from multitask-bar.
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data. -
After upgrading my iPhone 5 to iOS 7 iTunes will not stay open once the app launches...does anyone know how to fix this? Please Help :)
I have exactly the same problem. I too have tried everything that's been suggested, but still not working. Don't really what to do next? I have an iPhone 4S.
-
I'm using a late 2006 2.33GHz imac.
I clean installed 10.6 from disc then updated to 10.7 from download.
Now every time my computer goes into sleep it won't wake up.
The only way it will restart is to pull the mains lead out of the imac, put it back and try until it will start.
This only happened after reinstalling. Only Apple OS was on the imac and so it must be an issue with the software I believe.....
Anyone know how to cure this problem please?
Thanks
paulThis isn't a fix, more a workaround I used when I had wake from sleep problems that lasted from some point in 10.6.x, through 10.7 and into 10.8 (got fixed for me in 10.8.2). It seems to be connected with Bluetooth failing to wake up properly:
System Preferences>Energy Saver and set 'computer sleep' to 'never'. -
iphone 4 is hiting in ios 5.1.1. any one know how to solve this problem??
This sounds like a hardware problem and should be taken to Apple if the heating / "hiting" becomes disturbing to you. If you feel that your iPhone has a heating / "hiting" problem and needs to be repaired, please contact Apple Support and they can further assist you in having it inspected, repaired, or even replaced. In the past, the overheating of Apple products has been known to cause harmful problems to a few particular users. Please evaluate your situation and take further action if you feel necessary.
http://www.apple.com/support/contact/ -
I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?
Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden -
My iPad is locked up and has a apple and a bar under on the screen and it will not turn on or off. Anyone know how to solve this problem?
Press and hold the Sleep/Wake button until the red slider appears. When the red slider appears, release the Sleep/Wake button.
Instead of dragging the red slider, press and hold the Home button for six seconds.
See Here for More Details on Unresponsive iPad
http://support.apple.com/kb/TS3281 -
Hi
Can Any one tell me. System considering the Sales District also in Delivery Split which is not in standard. How to resolve this. Please help meDear Srikanth,
I am not sure, if my answer will satisfy you, but anyway I will try:
Field Sales District is technically called BZIRK. In delivery structure is this field located in header (table LIKP), what cause split, if origin document (Sales Order) has different Sales District in some positions. This is standard program behavior. Basically it shouldn't happen, as value is taken from customer master (Sold-to Party) and copied to header and items of sales document. But user can manually changer for particular items.
Well, to solve situation you have few ways:
1. Do not allow users to change value on items - can be managed by organizational decision or by authorization concept.
2. If there is a reason to have different Sales District in items, then it can be managed in in routines for copy control between sales and delivery documents (delete value of BZIRK for all items for instance). But then will be this information lost for further usage. It seems to me to invoice is value copied directly from sales order (field VBRP-BZIRK_AUFT) then it mustn't be a critical for analyses.
3. Your situation also can happen if you wants to collect more sales documents to one delivery. In this case can be that Sales District is different for same customer in different sales order (even seems to be little bit strange). Then solution from point 2 can help as well, I believe.
Best Regards
Arnost -
I can't forcequit firefox and shutdown my computer, nor can I open up any other programs or applications. Does anyone know how to fix this? please help this poor soul.
You can force quit applications
>Force quit
if that does not work you can force quit a computer shut down by hold the power button for an extended period. -
My computer sees the auto duplexer on my Epson Stylus PX720WD but iworks says it is not installed. I have contacted Epson and I have the impression that they don't know how to solve this problem. Anyone got any ideas?
If you print to PDF first, and then print it from Preview does it work?
Maybe you are looking for
-
I started with ITunes Match a few days ago (I have the latest versions of all OS's etc) - The whole process took more then two days to complete for the first time. - Half of my songs are matched in iTunes Match where the other songs most of the time
-
How do I fix a slow imac on start up and when switching user? The blue screen will stay on for 3-5 minutes. Thanks
-
Can not add new mail account following 10.6.2 upgrade
Mail crashes when trying to add a new IMAP account. Process: Mail [394] Path: /Applications/Mail.app/Contents/MacOS/Mail Identifier: com.apple.mail Version: 4.2 (1077) Build Info: Mail-10770000~4 Code Type: X86-64 (Native) Parent Process: launchd [97
-
Graphical screen painter(gnetx.exe)
Hi! I installed SAP4.7 on my home pc on windows2003server. when i open graphical screenpainter i'm getting this error: no response from graphical screen painter(gnetx.exe). what to do and where can i get that file from? I promise to award marks.
-
My new iphone 4S camera is not functioning. When I click the phone icon, the shutter appears. Then the screen only shows the shutter. When I go back to the home screen and click the phone icon again. The photo screen only shows a black screen. T