I have Ipod Nano 6th generation.  My computer recognizes device but Itunes doesn't.  Any suggestions?

I have Ipod Nano 6th generation.  My computer recognizes device but Itunes doesn't.  Any suggestions? 

You might have better luck posting in the iPod Nano forum.  You posted in the iPod Touch forum. For an iPod Touch one would start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Similar Messages

  • I have an ipod nano 3rd generation 4G, computer recognizes it but not iTunes

    I have an ipod nano 3rd generation 4G, computer recognizes it but not iTunes.

    Hello bsowell,
    Thank you for using Apple Support Communities.
    You can use the following article to troubleshoot your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Regards,
    Jeff D.

  • Ipod nano(6th generation) it is not recognised in itunes.. it says it cannot recognise this device completely..try unistalling and re-install itunes.. i did but it still doesnt.. even my ipad is not recognised in itunes,.. wat shall i do ..pls help me ...

    ipod nano(6th generation) it is not recognised in itunes.. it says it cannot recognise this device completely..try unistalling and re-install itunes.. i did but it still doesnt.. even my ipad is not recognised in itunes,.. wat shall i do ..pls help me ...

    Did you uninstall iTunes and all other Apple related software using the instructions in this Apple support document?
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    B-rock

  • My iPod Nano 6th generation no longer shows up on iTunes

    how do I reconnect my Ipod Nano 6th generation to my iTunes?

    Hello MariaEugenia1962,
    We've an article that can help get iTunes speaking with your iPod again.
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Cheers,
    Allen

  • How many others have iPod nano 6th generation with on/off buttons broken?

    I've been reading on here just how many others have the same problem as I do.  My Nano is a few months outside the warranty and the on/off button doesn't work anymore.  It works if in a docking station but what use is that?  The button gave me a few problems inside the 12 month warranty but it was intermittent - I just thought I hadn't pressed the button right!  Apple must surely do something about this design flaw - there are countless people complaining about the same thing!  I just tried to log a 'support call' - to discover I must pay £25 before someone will even answer the phone?  I will definitely think twice before buying another Apple product - this is the second iPod with which I have had 'design' flaws.  The first was a worldwide defective replacement due to battery problems - they at least had the decency to replace those.  Absolutely rubbish customer care.

    Take a lesson from this: even if you have a device where the problem is interrmitent take it in to the Genius Bar anyway. Had you done this, and even if it hadn't acted up while you were there it would be on record that you brought it in prior to the warranty expiring for the problem. This applies to anything you buy with a warranty.
    That said, neither of the 6th Generation models I have (and had), nor any of the about 10 I gave as gifts, have had the problem. If I were you I would call AppleCare, immediately tell them you want to be transferred to Customer Service, and calmly lay out to them your situation in a calm manner and see what they can do for you.
    The replaceement program for the 1st Generation Nano was due to a Sony battery issue and did not involve all models, only those with a certain range of battery serial numbers. It was also a safety hazard.
    @keeferaf: It isn't "infamous" nor does it really qualify as an Achille's heel.

  • IPod nano 6th generation not charging, not showing in iTunes, won't reset

    iPod 6th generation, completely out of battery.  Won't charge off iMac, plug socket or Macbook.  Won't show up in iTunes in any either.  Won't reset using the method i found on here (volume down button and sleep/awake button for 8-20 seconds).
    Any suggestions?
    Thanks!

    hold down the enter button for 5 secs then plug into wall while still holding it down.

  • My iPod touch doesn't sync with iTunes, my computer recognizes it but iTunes doesn't

    When I plug in my iPod, my computer shows that it is recognized. But when I go into iTunes to watch it sync, it doesn't appear at all. I've tried restarting iTunes and installing the newest version of iTunes but it says that there's an error when I install the newest iTunes.

    What is the exact wording of the error message?
    Thimay help:
    iPod: Appears in Windows but not in iTunes

  • I'm stumped. Just picked up the new iPhone 5. I have 10.8.2 Mountain Lion with latest version of iTunes. Dropbox recognizes device, but iTunes doesn't. Help?

    My iPhone 5, with its fancy new cable and whatnot, won't show up under iTunes. I don't understand why. All my devices are checkmarked to show under Finder Preferences, but the iPhone doesn't even show up under Finder. However, the popup from Dropbox asking if I want to import my iPhone 5's pictures pops up. Any ideas? Thanks.

    I fixed it. I just redownloaded iTunes and it worked. Source Here: http://www.reddit.com/r/iphone/comments/11zydt/im_stumped_just_picked_up_the_new _iphone_5_i_have/c6r5r1l

  • IPod nano 6th generation suddently stop playing.

    After 2 year, my iPod nano 6th generation suddently stop playing.
    A restore doesn't resolve the problem.
    Please help.
    Thank you.

    No problem.   And no worries, several people have made this same mistake!
    Either way enjoy the iPod!
    Brock

  • My iPod Nano 6th generation doesn't seem to recognize album artwork. I've downloaded the artwork manually, and I've even restored my iPod to defaults several times, but nothing works. Does anyone have a solution?

    My iPod Nano 6th Generation is not picking up album artwork. On several of my tracks, it recognizes the album art, but it doesn't seem to recognize the others. I've tried uploading the artwork onto several albums manually, I've cleared the downloaded artwork to download them again, I've even restored the iPod to its default settings...nothing seems to work.
    Does anyone have a solution to this

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on anoterh computer to help determine if you have an iPod or computer problem.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • HT1339 I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

    I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

    Try doing a level reformat of the iPod's flash storage instead to see if that kills the restore loop using the instructions in the article below.
    http://www.methodshop.com/gadgets/ipodsupport/erase/
    B-rock

  • I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work?

    I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work? I know that my iPod should take music videos because there is a pre-made playlist called "Music videos". Can anyone help me please????

    You can sync the music videos, but they won't play on your 6G Nano, because it does not support video playback. Sorry.
    B-rock

  • Good afternoon, I would like some information I have an ipod nano 6th generation and has the same one-year warranty is only 2 months of use, and it fell down and broke the glass of the display, I called technical assistance in Brazil and informed me that

    Good afternoon, I would like some information I have an ipod nano 6th generation and has the same one-year warranty is only 2 months of use, and it fell down and broke the glass of the display, I called technical assistance in Brazil and informed me that Brazil has no repair services for Apple, which was the basis of its price change in the exchange is not worth half the value of the product.
    I wonder how I do to change this device without the expense of 50% for the same product is in warranty?
    Thanks in advance.

    yes agree, plus a multinational seeing a product and has no technical assistance to do the maintenance then it's no use I buy a new product if it is damaged I will always be because it has no prejudice in this maintenance.
    sorry but even more products coming from China to Brazil in technical assistance.

  • What screen does the ipod nano 6th generation have to be on to charge

    my ipod nano 6th generation 8g is flashing the apple logo then it will go to the main screen  i have it pluged into a 500amp wall charger, how do i get it to charge only have had it 2 and 1/2 weeks charged when i got it hom charged it again. let it sit and then it read low battery conect to power and i can't get it to charge help does it  have to be on or can it be off to charge,this is crazy

    Hi, Will the nano 7th gen, be able to recieve bluetooth information sent to it via a iphone 4s? Reason being, to keep the phone in my pocket/bench top but having headphones with out the connecting cable to the phone and still able to take calls.....I see bluetooth headphone receivers around but they dont have track names, caller ID displayed. Or does anybody know of a bluetooth headphone reciver device that will display caller ID and track names compatible with a iphone 4s? Thanks for any help

  • My ipod (nano, 6th generation) won't sync to a new computer with different stuff on it. It *appears* to sync but when it's done it still has the stuff from the other computer on it. What to do?

    My ipod (nano, 6th generation) won't sync to a new computer with different stuff on it. Itunes on the new computer doesn't give the usual warning that you are about to lose all your existing stuff and the ipod *appears* to sync but when it's done it still has the stuff from the other computer on it. What to do?

    Hey eamonn27
    Thank you for using the Apple Support Community. Due to the nature of your issue, you may find more information by using another one of Apple's support resources.
    Express Lane
    https://expresslane.apple.com/GetproductgroupList.action
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for

  • Working with virtual host & hosts files on a local network

    I'm setting up a small local web and production server here in my office running Leopard. I'm setting up virtual hosts for users on the network to review and comment on websites in development. Ideally they'd access it as: host1.webserver.local host2

  • Print PDF with special print options of Canon IR printer

    Hi, We have a collection (db driven) of PDF documents that we want to send to our network printers. Some document need a hole punch of some other specific printeroptions of a Canon IR printer. The ideal solutions is a windows application where i coul

  • IDOC data transfer SAP to Java using SAP JCo

    Dear Experts,           The challenging requirement we are having is, we need to create the interface for data transfer between SAP system and the Java system. The data will be transferred from SAP to java and similarly once some processing done in J

  • Calling a function from a dll given by a third party

    Hi everyone, I was given a dll that exposes several COM functions. I want to call one of them (using java code) that is called LoginGUI() that returns a string. How could I do that? Thanks for your feedback. I am working on a windows environement.

  • Upgrading the Target System-Will it affect the XI Messages?

    Hello Friends, I need to know the better solution for the following issue. We have a scenario SAP->XI->SRM 4.0. Now we are upgrading SRM 4.0 to SRM 5.0. If we upgrade the SRM System, whether the Messages flow in XI will get affected? Regards, UP