I have ipod touch 1st gen and its on but frozen
I have a ipod touch 1st gen and its powered on but is frozen any help?
Hold the lock and home button for 15 to 30 seconds. You should see the apple logo and it should start up to the lock screen. Thanks please like
Similar Messages
-
I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?
Have you tried:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
Apple will exchange your iPod for a refurbished one for this price:
Apple - Support - iPod - Repair pricing
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
IPod Touch 1st Gen and 3.1 update DELETES volume slider
I had a perfectly working iPod Touch 1st Gen/16GB until I updated to 3.1 software. Now I do not have a volume slider.
Yes headphones are in but there is no place to adjust the volume. There is previous, next arrows and play and pause AND its centered in the rectangular area, but no volume slider.
I have restored it 3x in various ways. I have tried 5 times to downgrade the operating system but ALWAYS get an error, so it never completes. Of course the ipsw files where found using google because there isn't any links that work on Apple's site for previous iPhone software. If I try to restore to 3.1 right after that it goes through perfectly.
So it seems that Apple has locked out downgrading once you upgrade! All I want is my volume slider back. How can I get it back if 3.1 deletes it everytime and I can't go back to the previous operating system?
Thank you.I too have had this exact same problem, except that I was running 3.0 and hadn't updated to 3.1. I put my ipod on the table overnight, after listening to it, and when I picked it up the next morning, theres no volume slider. I never even unplugged the headphones. Double clicking the home button while on the home screen would bring up the popup to skip songs, and there it says "Dock Connection" even though it not connected to a computer. Multiple reboots an no effect. I've tried different sets of headphones, to no effect. Its like the iPod isnt detecting them being plugged in. The worst part is i DO get sound in the headphones, but no volume control, and the sound level is turned really low. So the headphones ARE working.
I updated to 3.1 just now, and the problem has NOT been fixed. Theres no way anywhere in the settings to adjust the volume. Theres only a limit slider, so I have no way to turn up the volume loud enough to actually HEAR things. -
yes, so i connect to my wifi at home, my brothers iphone works fine, but my ipod touch 1st gen dosent conect. it connects but when i go on safari it dosent work, it says" connecting" with the circle loading thing. plz help< o and my router is fine because my brothers iphone works great, ive tried restoring and reseting networks, and ive also tried forgetting the network, my ipod touch 1st gen is out of its warranty, so what can i do?
Try restarting your router by removing power to it for 30 seconds. This may correct the problem.
-
i tried to reset my ipod 1st gen and its stuck on the screen where it has a pic of a usb cord and the itunes logo what do i do???????
Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software -
hi there i ahve ipod touch 2nd gen and i am tryna restore it but get error 21 with orginal fireware and 1601 with custom firewarw and when connected it to itunes and i try to boot it by resotring it white screen with lines through it
Those errors are covered here:
http://support.apple.com/kb/TS3694 -
Syncing an old iPod Touch (1st Gen) and new iPad (3rd Gen)
I have an old iPod Touch (1st Generation) which runs iOS 3.1.3, the latest possible for the device. It is synced to my Windows desktop PC. However a lot of apps are not fully updated because the newer versions are no longer iOS 3 compatible.
I am getting an iPad (3rd Generation) on launch day next week and will obviously need to sync it to my PC with fully updated apps, however, I also want to keep using my iPod Touch will all its apps too.
Is it possible to have two sets of apps on iTunes on one PC, one for the old iPod Touch with its older apps and one with the new apps for the new iPad.
I update all the apps on the iPod Touch itself so I never update an app that is no longer compatible with iOS 3.0
The solution I've come up with at the moment is to copy the iTunes folder on to my laptop and use that for one of the devices and use the desktop for the other. But would like to use just one PC if possible.
Can anyone advise?
ThanksIt turns out that I took all the apps off my touch, but I have an iPhone 3 that hasn't been updated in at least six months. There's got to be something on there that's incompatible with the current iOS architecture, but it's syncing as I type this with no problems.
You've got your iTunes copied to your laptop - why not use the original copy for a little snooping? I think you'll find that everything works just fine.
BTW, there are several apps in the iTunes library on my desktop that are duplicated. I never could figure out why, but my guess is that some of them are versions that will run on one handheld and not the other.
Hope that helps.
Mike -
Hey i have managed to download the Imovie for the Ipod touch 4th Gen, I can't seem to export or upload to youtube a 16:9 screen just a very thin screen. I don't have a apple mac, I have windows vista. I realise for some features you have to use a apple mac. So is there anyway that I can fix this problem, thank you for your time and patience.
-SpiritualperformerSee:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
You can also go to Settings>General>Accessibility and turn on Assistive Touch It adds the Home button to the iPod's screen.
Yes, if you get it fixes, the iPod will likely be erased. Apple will not repair your old iPod, they exchange it for a refurbished one and do not transfer data. -
hey i have a 2nd gen ipod touch and its a little cracked and half the screen isnt touch screen anymore what do i do
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Plz help
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Help! I have no way of getting to an Apple store, i'm overseas
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I am trying to restore an Ipod Touch 1st generation and I am receiving an error code of 1, How can I resolve?
i have the same problem ipod touch 1st gen and its 1 not -1
can you help please?? -
So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I have the iPod touch 1st gen my games arn't working
Ok my iPod 1 is updated to 4.2.1 or thats what it says and a few days ago all my games where working fine. I'm not sure if it was today or yesterday but now none of the games will even load other than pocket frogs which for it when i hit go to pond it crashs so I can't play it. And its only the games that are not working the other apps and websites that i have the apps for work fine it is only the games and its all of them other than birds'n'blocks
The highest supported iOS level for the iPod Touch 1st gen is iOS 3.1.3.
Are you really sure of what hardware and software you have? -
my ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend
I have not seen a solution for error (1)
make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Blank PDF files in Crystal 8.5
Hello, I have one application in VB 6.0 with Crystal 8.5. In this application I have a lots of reports (rpt files). All are working without problems when I export to pdf format, but I have one report with 6 sobreports. When I export to pdf and the re
-
House bank account & suspense account
Hi all, Is it possible to make a normal G/L account as a house bank account when some postings are already made in that G/L? Also, how to create a suspense account and link it for payments to the house bank account. Thanks in advance. Stalin.
-
Hi, Any one explain the message flow in XI Thanks in advance
-
Button Highlights/Overlays in Photoshop
How do I create a simple rectangle highlight around text in Photoshop? I tried creating a rectangle with the rectangle tool. Shape Layers creates an outline (which I can create a thicker stroke), and Fill Pixels creates a rectangle with the option to
-
Fowarding traps to snmpdx with a legacy subagent
This question ties into my last posted question about forwarding traps from a subagent to snmpdx. Can I forward traps from a subagent (developed with AdventNet) to snmpdx, OR, can this only happen when the subagent is developed using the SEA developm