I have iWork 09 and OS 10.7.5 but Software Update says there are no updates.  Anyone know why?

I have iWork 09 and OS 10.7.5 but Software Update says there are no updates.  Anyone know why?

Because you need to get Mavericks and then the current iWork applications from the Mac App Store and not Software Update.
(103976)

Similar Messages

  • I have a mac book pro and am trying to load microsoft suit it says I need mac ox 10.6 or higher but my computer says their are no updates and i and i am at 10.5.8 what do i do

    I have a mac book pro and am trying to load microsoft suite it says I need mac ox 10.6 or higher but my computer says there are no updates My computer is currenly
    at 10.5.8 what do i do

    Click here for it.
    (114955)

  • Does iTunes match need to locate the actual files or just see its record in your library database? I am currently traveling in US and I have US and Australian iTunes accounts. But all my music files are on a hard drive in Australia.

    Does iTunes match need to locate the actual files or just see its record in your library database? I am currently traveling in US and I have US and Australian iTunes accounts. But all my music files are on a hard drive in Australia. Can I start using itunes music match while I am travelling without the actual music files attached to my itunes?

    In your situation I strongly recommend you read over that KB article. The international iTunes Stores are not cross-compatible.
    My understanding of how it would work is that when activating iTunes Match on your US Store account, any songs you have in your iTunes Library that were purchased from the AUS Store account will NOT be matched. As I understand it, those files will be uploaded (which means you need the files on a local HDD). I also do not think it is possible to have iTunes Match active on more than one store ID on the same computer. But since iTunes Match is not available internationally yet, that point is moot for the moment.
    To be honest you might want to wait until the service is available internationally so you can guage how will it will serve you.

  • HT4929 I have os x 10.6.8. When I try to update it says there are no updates for my sytstem.  I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

    I have os x 10.6.8. When I try to update it says there are no updates for my system.  I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

    Welcome to the Apple Community.
    You can purchase Lion from the Mac App Store. You will need to meet the requirements for Lion, but the Mac App Store will tell you whether your Mac is capable of running Lion or not.

  • HT201364 I have a macbook with OS X 10.6.8, 2GB of ram, and enough space to download, but it still says it cannot download the update on this computer. Would anyone know why? Thanks.

    I have a macbook with OS X 10.6.8, 2GB of ram, and enough space to download, but it still says it cannot download the update on this computer. Would anyone know why? Thanks.

    Choose About this Mac from the Apple menu, click on More Info, and check the model identifier against the following, which are the earliest Macs of each type that can run Mountain Lion and Mavericks:
    iMac7,1
    MacBook5,1
    MacBookPro3,1
    MacBookAir2,1
    Macmini3,1
    MacPro3,1
    Xserve3,1
    A computer incapable of running Mountain Lion which has a Core 2 Duo(not Core Duo) or better CPU and at least 2GB of RAM can run Lion 10.7, which is available from the online Apple Store.
    (92639)

  • HT1338 I have a macbook and I keep pressing software update and my computer version 10.5.8 and it says there are no updates anything I can do?

    I have a macbook and I keep pressing software update and my computer version 10.5.8 and it says there are no updates anything I can do?

    10.5.8 is the last release for OS X 10.5.
    If you want to upgrade your operating system, you have to buy it, and it's not available via download. The next upgrade for you would be to OS X Snow Leopard 10.6. In the US, call the Apple online store at 800-MY-APPLE and order 10.6 from the legacy products list. They will send you a DVD, which you can install, then use Software Update to get to the last release of 10.6.8.
    If you want to upgrade further, and your sytsem will support it, you can call the Apple online store again to buy Lion or you can connect to the App Store to buy and download Mountain Lion. If your system will support Lion or ML, you probably should have 4GB of memory for reasonable performance.

  • When I try opening iPhoto on my iMac (OSX 10.9.2) it says I must first update the application; when I try doing so from the App store, it says there are no updates available. I have not renamed or moved iPhoto which was preinstalled. How to solve?

    When I try opening iPhoto on my iMac (OSX 10.9.2) it says I must first download the update; when I try doing so from the App store, it says there are no updates available.  Stuck in a classis Catch-22 - any ideas how I might solve the problem?

    Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
    BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
    Thanks for your help; hope this wasn't extremely long.

  • App Store has not up date for over 24 hours now, it was updating as usual early AM Nov. 6th, I have changed nothing, App Store will not let update or purchase happen now. Anyone know why? Thank you.

    App Store has not updated for over 24 hours now, it was updating as usual early AM Nov. 6th, I have changed nothing, App Store will not let update or purchase happen now. Anyone know why? Thank you.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ install.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • HT4589 After Yosemite Final cut pro will not run and says there are no updates available.

    OS X Yosemite caused Final Cut Pro to not run until upgraded.  Says there are no updates available and will not let me install it - says I already have it.
    Boxed in and can't move. Now FCP v 10.1
    OSX v 10.10
    Jim

    FCP (10.1.3) works just fine on 10.10.. try to trash FCP then re install.

  • Only have 3 devices authorized, but my new computer will not authorize. Itune says there are 5 devices connected already. why?

    only have 3 devices authorized, but my new computer will not authorize. Itune says there are 5 devices connected already. why?

    Perhaps the five includes computers that you no longer own, or a computer that has had a replacement hard drive put in it.
    In your iTunes account, De-authorise All and then authorise the computer(s) that you still use.

  • HT1338 I am trying to open turbo tax 2012.  A box pops up that I don't have the update to be able to open it, however when updates is pulled up it says there are no updates.  I am a novice at this.  Do you know where I can get help?  Thanks

    I am trying to install Turbo tax 2012.  Ihave downloaded it but it says I do not have the correct version to open it.  I am computer illiterate.  When I open updates, the message says there are no updates.  Can you help?  Thanks

    What's the model number of your Lexmark printer?

  • IPhone has 7.0 os and says there are no updates

    My iPhone 4S IOS is 7.0.  I am told by others that there is a 7.02 yet my phone says there are no updates.  What's my problem?

    There is indeed an update to iOS 7.0.2
    On your iPhone se the Settings app
    Settings > General > Software Update
    Do you get a notice about an update there? If not the first thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. Then go back to Settings and check for an update again. If you still don't see one and you are sure that your phone is not already updated to 7.0.2 try connecting your phone to the computer you normally sync with. Make sure the computer is running tunes 11.1.1. Use the Check for update feature in iTunes on your computer.

  • HT4859 Due to IOS it Said it could not restere backup to new iPad, so i set up as new iPad thinking i could restore from backup afterwards, Then I updated iOS but Joe it says there are no backups...White Can I find my backups and restore Then?

    Due to IOS it Said it could not restere backup to new iPad, so i set up as new iPad thinking i could restore from backup afterwards, Then I updated iOS but Joe it says there are no backups...White Can I find my backups and restore Then?
    Pls ignore auto correct mistakes!

    I found a way to get to my data.  So do not need remedy at this time. 
    fwiw, I changed my ios7.04 setup answer of restore from itunes to new iphone. Eventually that allowed me to set up icloud, then turn off find iphone, restore.  Very strange ios update. 

  • My apple id was disabled, and i reset the password but it still says its disabled. Has anyone solved this problem?

         my apple id was disabled, and i reset the password but it still says its disabled. Has anyone solved this problem?

    I solved that particular problem for myself (although I am running iTunes 11 under Snow Leopard on an iMac) by deselecting one of my Users Admin. privs. You see, I had two users w/admin privs & iTunes now plays nicely when there is only one admin.
    Otherwise, I would keep getting stuck in an "infinite loop" of resetting passwords over & over and still iTunes was a mess - albeit on an intermittent basis which was absolutely driving me nuts!
    I also think that firing up Safari and signing into my account @ apple first seems to help; providing that an apple cookie gets placed in my machine before I go to the iTunes store and enjoy surfing around there.
    Anyways, good luck~

  • I have ios 5.1.1 and when I check for updates the phone says there are no updates

    i have ios 5.1.1 and when I check for updates the phone says there are no updates

    Go to Settings > General > Software Update and see if you can update it over the air.

Maybe you are looking for

  • Vendor Master Address Load

    Hello, I am having difficulty loading address data for vendor master.  I am using IDocs (message type ADRMAS).  However, when I execute the IDocs, an error message comes up stating "Please specify address group".  How and where do I specify this addr

  • Postings during MIRO reversal

    Hi Gurus, I have created a PO with account assignment (GL). *During MIGO entries are:* Acct  Assignemnt(GL)   + GR/IR                         - *During MIRO:* GR/IR                        + Vendor                       - But during MIRO reversal via

  • Crypto errors CTM ERROR: Failed to allocate x bytes of memory

    Hi There. I am currently getting a strange error when trying to use and crypto services on our ASA 5520 (8.0.3) Initially I observed that a connected VPN had dropped. Then when I attempted to use ASDM or SSH I was blocked. In the end I opened telnet

  • Converting a single row into multiple columns

    Hi All, I have a hierarchy table. Sample values are Parent Child 1 1 2 1 3 2 4 3 5 2 6 I have used the connect by clause to get the following listing using sys_connect_by_path /1/ /1/2/ /1/3/ /1/2/4/ /1/2/6/ /1/3/5/ But now I need them in seperate co

  • Regarding Title for the Screen

    Hi,    I want the title of the screen as  Title name along with date & time ( date & time from table ).   How can i set that ?   Waiting for ur Reply... Regards Srinath