I have just bought a Humax PVR and Humax W-Lan dongle to connect to my Airport Extreme. I have put the mac address into the AE. The installation screen is picking up my network name no problem but it won't connect to the internet. Can anyone help please?
I have just bought a Humax 7500T PVR and a Humax W-Lan dongle to connect to my Airport Extreme.
I have put the mac address into the AE. The installation screen on my TV is picking up the network name but once appied it won't connect to the internet.
I've a few other things connected to the AE such as computers, ipad, itouch, etc, and have never had a problem connecting these once I've entered the mac address into the AE. Can anyone help me with this please?
have you made sure that the network setting in the system preferences is set up to use dhcp? if not i would try changing it so that it shows that it is getting its address by dhcp
Similar Messages
-
iPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but after downloading the software, it brings error in downloading s/w message.can anyone help please.Thanks
http://support.apple.com/kb/TS3694#error14
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
I have a mid 2007 Macbook pro, plenty of memory, and OS X Lion 10.7 but the app store won't let me upgrade to Yosemite. Can anyone help?
Check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher -
I have bought a wireless printer and it requires os10.4 or better, my iPad is iOS 5.0 is there a way to up grade my iPad, or make it comparable to my iPad.
You need a AirPrint-enabled printer
http://support.apple.com/kb/ht4356 -
Brought thee Microsoft office app on istore but app is faulty, would like a refund.. What can I do about it please?
There is no Microsoft Office app for iOS devices. What you bought is almost certainly only a book or guide about using Office on a computer. That's usually made pretty clear in the description for the book, so you probably cannot get a refund, since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
http://www.apple.com/support/itunes/contact.html
It's possible they'll make an exception for you.
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question. -
My Ipod touch screen has gone white with bright white spots on it. I have restored it and it shows in ITunes but the screen is still white. Is there anything I can do? The warranty has run out so I will have to pay for any repairs (if it can be repaired). Any help would be much appreciated. Thank you in advance.
If you still have problems after restoring the iPod to factory defaults/new iPod then you very likely have a hardware problem. I would make an appointment at the Genius Bar of an Apple store.
-
I have just bought a new shuffle and cant get it to syn
I have just bought a new ipod shufle and cant find the sync button. The problem is that i have an old shuffle already registered. I have downloaded the latest itunes on my laptop but cant see my new ipod listed anywhere, can anyone help please?
The problem is that i have an old shuffle already registered.
That's not a problem. You can connect multiple iPods to your computer at the same time, and each one appears separately in iTunes.
If this is the first time you are using iTunes 11.x, the sidebar (along left side of window) may not be visible. If so, from the menu bar, under View, select Show Sidebar.
Make sure you are using the USB cable that came with the shuffle, if your old shuffle is a different type (2nd gen). When connected, it should appear in the sidebar, under DEVICES. If you connect both shuffles at the same time, they should both appear under DEVICES.
If that does not happen, please post back. -
I am trying to send an email to a group which I have created in my contacts. I would like to hide the list of email addresses but cannot see how to do this. Can anyone help please?
Thank you for your message.
I can see how you do that when using the 'normal' emailing system from my mailing box, but not when working from the contact application (the 'book' on the bottom icon bar with the @ on it).... -
I have just bought a new computer and downloaded the latest version of itunes. It has all installed fine, but when I plug my ipod and sync it, the music library shows all the songs and videos that are on there, but won't let me play them. Also, I can't add any new songs to the same library. It saves them elsewhere. I have had the previous version on another computer and it worked just fine. I have been online trying to find an answer but nothing. Hope someone can help me. Thanks
Installing iTunes does not cause content to magically appear on the computer.
Your media is only where you put it.
iOS devices are not backup devices.
Copy the media from the old computer to the new computer. -
I have just bought a new iPhone and gave my old one to my Mum. My problem is that even with a new SIM and phone number I seem to be getting her messages as well as mine on my thread. They are also being recorded as both sent and received so she must be paying twice for each SMS sent. Help please
Wipe iPhone/iPad/iPod touch clean
There are a few steps to do:
Switch off iMessage in Settings > Messages
Switch off FaceTime in Settings > FaceTime (iPod touch 4th Generation or later, iPhone 4 or later and iPad 2 or later)
Delete iCloud in Settings > iCloud > Delete Account
Finally Settings > General > Reset > Erase All Content and Settings.
Un-register your device: https://supportprofile.apple.com
Now you can sell/give.
Now, you should get her a new Apple ID to sign in the options above. -
i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated
Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
Power down the system and restart with the drive connected, go to DU and see it it is seen. -
I have just bought a new macbook and trying to add all my music to my new itunes from a previous version of itunes (iTunes 9) in my seven year old Mac. I can import all the MP3 songs but iTunes ignores all the m4a format files. What to do? I have copied them into the music file along with the mp3 files but they still dont open in iTunes.
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
Also... have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html -
I have just bought a hdmi tv and would like to view very high quality images, using apple tv, stored on my external hard drive. I also have blue ray movies stored on my external hd. will i be able to stream these to my tv and view them in 1080p?
sorry, why isn't correct?
i try convert video with quick time to apple tv, import in itunes( that's ok) but is impossible to synchronize my apple tv ( unsupported file).
where I wrong?
please could you explain me the correct procedure?
i have some video ( holiday movie an photo movie in mpeg2 full HD) to convert for apple tv, and from 2 years some video editing with imovie.
normally I prepare my video with Imovie, create a file .mov full hd (like master) and with roxio convert file for apple TV.
apple world is new for me, after 25 years with microsoft!
thank so much
mauro -
I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?
I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.
I had this and fixed it.
I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
After lots of hunting, I found the Signature Folder. It's in:
Yourusername>Library>Mail>V2>MailData>Signatures
Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
Since this was literally a clone of my previous setup to a new machine, here's what I did:
1. Quit Mail
2. In Problem machine, go to
Yourusername>Library>Mail>V2>MailData>Signatures
3. Move the Signatures folder someplace safe, but out of the MailData folder
4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
5. Start Mail on the problem machine
This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
Hope this helps
Maybe you are looking for
-
Using a byte[] as a secondary index's key within the Collection's API
I am using JE 4.1.7 and its Collections API. Overall I am very satisfied with the ease of using JE within our applications. (I need to know more about maintenance, however!) My problem is that I wanted a secondary index with a byte[] key. The key con
-
Tomahawk t:inputDate problem in IE
I am using t:inputDate with popupCalendar attribute set to "true". It works perfectly in Firefox but the calendar can't popup in IE. Would anyone please help me? Thanks very much! Note: I have already added extension filters and I'm using tomahawk ve
-
How can i use iphone 4 to make video calls through 3G network
Pls let me know how can I use my IPhone4 to make video calls through my Airtel 3G network. Also pls suggest if any alternate is available. Thanks
-
RAR 5.3- Downloading ruleset from DEV RAR and uploading to PRD RAR
Hi , I am currently looking to implement RAR version 5.3 SP9. I will have a 2 tier landscape with a DEV and PRD GRC instance. We may not have the ruleset fully customised before we build PRD GRC. So after both RAR environments are built I may need to
-
Attention: Comcast Customer Services Since it has taken 2-3 months to resolve and trouble-related several issues related to my computer, TV and phone services ... I feel a credit adjustment should be made to my account. I have spent countless hours &