I have just bought a wireless printer and saw that I need os 10.4 or better. I have an iPad iOS 5.0.1. Is there a way it will work, or do I take it back and find one compatible.
I have bought a wireless printer and it requires os10.4 or better, my iPad is iOS 5.0 is there a way to up grade my iPad, or make it comparable to my iPad.
You need a AirPrint-enabled printer
http://support.apple.com/kb/ht4356
Similar Messages
-
i have just bought an ipad2 from usa. now i am in india. i am a first timer user of ipad. i have charged for three hours, when i start iti.e. on the device it shows a plug in icon with itunes. then the screen turns black. i am not able to use the device. kindly help
You need to plug the iPad into your computer that has iTunes installed on it, and activate it.
The User Guide would be good for you to read:
http://support.apple.com/manuals/#ipad -
My screen wont turn on, and the screen is black. It was working fine, but then it just turned off. The only way it will work is if I close my laptop, and pinch the two screens together
You have a hardware problem and you should take it into a apple store to be looked at and fixed.
-
I installed Lion online and i ran disk repair and found that i needed to do a repair but i have no start up disk. How do i repair without burning a disk?
Lion creates a Recovery partition on your harddrive. You will need to boot from startup.
click here
http://support.apple.com/kb/HT4718 -
i recently had to have my computer fixed and now it wont reconize my ipod. I do not want to have to reload all my music is there any way around this
Use your backup copy of your computer to put everything back.
-
Today I purchased a iTunes card, and it asked me for two answers to two security questions. I have forgotten what they were. Is there any way I can reset them? It sent a link to a email that I no longer have access to.
Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37 --> Can I change the answers to the security questions for my Apple ID? --> Yes. You can change the answers to the security questions provided when you originally signed up for your Apple ID. Go to My Apple ID (http://appleid.apple.com/) and click Manage your account.
Forgotten security questions - https://discussions.apple.com/message/18402551 and https://discussions.apple.com/message/18625296
More involved forgotten question issues - https://discussions.apple.com/thread/3961813
Kappy 09/2012 post about security questions - https://discussions.apple.com/message/19569468
John Galt's tips (09&11/2012) - https://discussions.apple.com/message/19809294 and https://discussions.apple.com/message/20229239
If none of the above work, contact iTunes Support at http://www.apple.com/support/itunes/contact/ and follow the instructions to report the issue to the iTunes Store. -
Got iPad 2 3-4 weeks ago wil able to take it back and get iPad 3
I got my iPad about 3-4 weeks ago from Vodafone not knowing the iPad 3 would be coming out this isn't fair will I be able to take it back and get iPad 3?
Apple gives a heads up weeks before.
Not true. Apple invited the press to an event one week prior to the event. The invitation was sent out 28 FEB for an event 7 MAR. Not a lot of notice. The invitation was a bit vague, but most folks realized it was likely a new iPad which had been rumored for release for a number of weeks.
This was the invite; -
Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.
Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
Hmm, ideas anyone?
SBB -
I have just got a iPad yesterday and I'm having a problem
I have just bought a tv series in iTunes and downloaded it on to my iPad but every time I go to watch it it comes up (could not load movie) then takes me back to the episode list ? Can you tell me how to solve this problem pleaseHave a look at the following:
http://itunes.apple.com/sg/app/quickoffice-pro-hd-edit-office/id376212724?mt=8&l s=1
http://itunes.apple.com/sg/app/office2-hd/id364361728?mt=8&ls=1
http://itunes.apple.com/sg/app/documents-to-go-premium-office/id317107309?mt=8&l s=1
http://itunes.apple.com/sg/app/polaris-office/id513188658?mt=8&ls=1 -
•I have just bought a Toshiba external hard disk to back up all my work from my macbook and its not working! I have checked the hard disk
its not working: (sorry for being so ambiguous), the computer recognises it, it comes up on my desktop, when i open it and try and drag a file across, it is unable to go into the drive, there is just a symbol indicating 'no' (i've read the instructions from Tosheba and there is no help). I have not partitioned the drive using the GUID partition scheme - i dont know what this means?!
-
I have just bought a new Mac Pro after my old one died after nearly 10 years. I have most of my music backed up on CDs, but when i load them into iTunes they are only identified as Track 1, 2, etc. Can I transfer from my iPod and how?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?
You probably can, but this type of configuration is not recommended or supported by Apple.
Two cautions if you want to try this:
1) The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
2) Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule. Two "hops"......even if the computer is located close to the Time Capsule.
If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported. -
I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i can't because i don't have the earbuds and i have serches or them. now i am suck with a phone i don't like at all until my next upgrade. this is very dishearten
1. If you are this unhappy with that phone, and the lost earbuds is the only thing stopping you from taking it back, why do not just buy some earbuds. That way you can get rid of that phone. It all depend upon how much you want to get rid of that phone.
2. Yet if you are stuck with that iPhone, here is something might help you to control the data usage. By design, iPhones do turn off WiFi when they go dormant. So if a download is in progress and so forth when the phone goes dormant, it will switch to use cellular data, if this setting is left on. Therefore, from multi-sources I have learned that if you keep your iPhone connected to a power source, then it will stay connected to the available WiFi. -
I have just bought an iphone 5 c and need to back up from itunes my old iphone 3 but the family has other iphones on itunes how do i select the right iphone to back it up from
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer
sheree206 wrote:
I have just bought an iphone 5 c and need to back up from itunes my old iphone 3
Old Phone to New Phone > http://support.apple.com/kb/HT2109 -
I have just bought an i phone 4s and successfully joined i cloud, i have also successfully linked up my pc with i cloud. However my i pad is a little older, and when i signed on to i cloud some time ago i used a different e mail 'sign in' address. How do I change this in order to link all three devices. Thanks in anticipation, David.
Go to Settings>iCloud, tap Delete Account and provide the password (if using iOS 7), then sign back in with the ID ("email sign in") you want to use.
Maybe you are looking for
-
MS PAC MAN WON'T SYNC TO MY IPOD 80 CLASSIC
I SENT AND EMAIL TO APPLE ITUNES SUPPORT BUT THEY WEREN'T VERY HELPFUL THEY JUST INSTRUCTED ME TO UPDATE ALL MY SOFTWARE. MY SOFTWARE WAS ALREADY UPDATED APPLES RESPONSE Dear XXXX, I'm sorry to hear that you have not been able to transfer your iPod g
-
How to search for a record before insert or update a table?
I need use user input collected to check to see if there is a record already existing, if yes, update the record, if not insert a new record. I try to use the select command first to figure out if there is a record matching already: String User; Stri
-
Sometimes I can't view web pages when the firewall is on, even though I can ping from the computer and everything seems fine with the modem. It happens a few times every week. When this happens the firewall log has entries like this: Feb 16 00:01:29
-
How and where does Delivery Date get calculated in ME51N
Hi, Can anyone please let me know the point where the delivery date is calculated in ME51N ? i enter the Material and Plant and press enter and Delivery Date ( = Current Date ) gets populated automatically. I need to find out where it happens. Becaus
-
Enhancement request: Branch report
I think this has come up many times on the forum, but I would really like to see better branch reports under application reports. For example 1. show me all pages that don't have a single branch defined. This would avoid the sheepish grin when users