I have just bought time capsule and airport works

I have just bought time capsule and the airport part is working, but when I try to link to the back up disc I get a request for a password. "writeconfig wants to use the "com.apple.parentcontrols.keychain.YynLph keychain. Any ideas? I've tried a number of passwords for the mac and none work.

Please see Resetting an AirPort base station FAQ.
You can do it from using a paper clip and the reset button on the back of the unit. See the link above.

Similar Messages

Just bought Time Capsule and im confused.

I just bought time capsule and I didn't want to open it yet since I don't want to pay the 10% restocking fee if i opened it. So i have a couple questions
my internet provider is telus, and i don't want to take out my modem. Is there anyway to just add this on so? all i want to do is too wirelessly back up my files.
Can you please give me step by step instructions? And one more thing do I need to pay extra to my internet provider?
Thank you

Is there anyway to put the Time Capsule on the third floor?
You need to either use a wireless modem and plug the other devices into the Time Capsule through Ethernet, or run an Ethernet cable between the modem and the Time Capsule, or use another AirPort base station to broadcast the wireless signal and the Time Capsule to extend it.
(44322)

Just bought Time Capsule and do not intend to use as a router. Can I use it just as a wireless backup to my Mac?

Hi all - Just bought Time Capsule and do not intend to use as a router given that my Uverse router works splendidly. Can I use it just as a wireless backup to my Mac? Sorry if this is a boneheaded question, but this is my first time backing up my machine ( I know, foolish). Thanks!

Your problem will be if you use wireless for internet then you cannot do both internet and backup at once.. you still should plug the TC into the uverse router and set it in bridge mode.. you can setup wireless if you like on the TC and use either TC or uverse but you must work out how to do both at once.
If you use ethernet on the Mac then wireless to backup is also a bit of an issue.. please ask as I can show you the setup.. or visa versa.. wireless for internet and ethernet for backup..

I have just bought iphone 5 and i have a problem in charging it , firstly it took a long time to charge when i opened it to the first time , and its nearly dont charge on 110 output, and its taking a long time to charge on 220 reaches 50% in 1 hour

I have just bought iphone 5 and i have a problem in charging it , firstly it took a long time to charge when i opened it to the first time , and its nearly dont charge on 110 output, and its taking a long time to charge on 220 reaches 50% in 1 hour is this normal?

The charger block is universal and is able to handle multiple votages. One hour to reach 50% seems fine to me if the phone was completely flat to start with. Just leave it on charge for as long as it takes to reach 100%. I leave mine connected overnight all the time and it does not harm the battery

I have just bought a movie and it says its going to take 170 mites to load. Can i make the loading time shorter?

I have just bought a movie and it says its going to take 170 mites to load. Can i make the loading time shorter?

Either by decreasing playback quality from HD to SD or HD 1080p to 720p.
Sounds as though your internet (like mine( is not fast enough for instant playback.
AppleTV need to buffer the video if internet speeds are below:
8 Mbps for 1080p
6 Mbps for 720p
2.5 Mbps for SD

Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)

Hello -
I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
Thanks a lot,
-TM
AirPort Exteme:
Time Capsule:

Hello JuliaApple. Welcome to the Apple Discussions!
You have several ways to configure both base stations for what you are trying to do.
The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it.

BT HomeHub, Time Capsule and Airport Express

I've just got the BT Broadband.
I have 3 Macs - 2 with 802.11n and 1 with 802.11g (which I'm getting rid of). I have a 500gb Time Capsule and a 802.11g Airport Express (which I really only use for AirTunes so can be off most of the time).
I've set up the BT HomeHub (which is 802.11g by the way). I can see the Time Capsule as a separate network but when I use AirPort Utility to try to join the HomeHub network the Time Capsule reboots and then can't be seen at all and I have to reset it.
Can anyone give me any pointers on how to extend the BT network using the Time Capsule?
The AirPort Express can't be seen at all either - I think this is a separate issue and I'm going to try resetting it.
It seems a shame to have invested in all this kit, only to be limited by the HomeHub. Is it possible to use the Time Capsule instead of the HomeHub or does the HomeHub have some kind of built in modem?
Is there a better broadband supplier than BT for Mac users?
Any help appreciated, thanks.

Like the other users, I don't know if this is of any help to you but.....
I also have a BT Homehub (with Hub Phone) which is banging away as a WLAN to which the Hub Phone connects. I've also just bought a Time Capsule to use mainly as a Network back-up device.
However I'm trying out the WLAN from the TC to see if it's any improvement over the BT Homehub. I'm therefore effectively running two WLAN's which you could use to extend coverage. For example set your Wireless devices to be able to connect to both WLANs and place the BT Homehub and the TC in different locations to give the broader coverage.
I've connected my TC by ethernet (WAN port) to the BT Homehub and currently have my iMac connected to the TC via Ethernet also (to help speed up the initial back-up as they're both Gigabit devices). I'll change this eventually, connecting the iMac via a switched ethernet (100MBs or 100BaseT) connection.
My Macbook is backing up to TC via WLAN and is connecting to the internet by WLAN to the TC and in-turn to the BT Homehub via the ethernet connection (between TC and BT Homehub). Sounds confusing, but everything seems to be working OK.
I'm keen to know if any other BT Homehub users have had any success with Back To My Mac - as I've not yet been able to get it to work (but my BT Homehub is one of the earliest types).
I don't think the Broadband supplier has any bearing on the devices used - with the exception of the router supplied or used to connect to the web.
Any use to anyone?
I am interested however in how you're using BT Broadband and a BT Homehub if you're based in the USA!?

Apple TV Inference with Time Capsule and Airport express?

I have recently bought an Apple TV 2, which seem to be working fine, however since installing it on my wireless network both my Time Capsule and Airport Express can't be found. Following some fault finding it seems that when I unplug the Apple TV I can reconfingure the TC and AE.
The TC and AE are configured to join my existing network....and have happy sat there for a few years.
I would really welcome any ideas.
Thanks
R

Welcome to the discussions!
It sounds like you have the basic configuration covered correctly.
You might want to check some settings on the TC:
Wireless Mode would be create a wireless network
"Allow this network to be extended" should be checked
The AX should be set to "extend a wireless network"
The "allow wireless clients" box should be checked
In this configuration, the ethernet port on the AX is active so things should work.
A minor point...Although the TC is a dual band device, the AirPort Express is not. Can you make sure that that the Express is connecting to the "main" network on your TC? The "guest" network cannot be "extended".
If you place your laptop close to the Express and hold down the option key while you click on the AirPort icon, some connection information will be displayed. The MAC address of the device that the laptop is connecting to will be indicated. Make sure that that this is the MAC address of the AX, and not the TC.
Another note...If you have not changed the default "main" network, the radio mode is broadcasting 802.11n only at 5 GHz. These higher frequencies are absorbed by walls, ceilings and any obstructions much more quickly than 2.4 GHz signals. So, if you AX is some distance away, you may not be receiving a strong signal for the device at that location.
If you have a signal strength utility on your laptop (the "bars" at the top of the screen are not a very good indicator of actual signal strength), turn off the AX and take a reading to see what kind of signal the Express is receiving where it is located.
Please post back with your results.

Question about Time Capsule and Airport Express co-existence

I have a new 3TB ME182LL/A Time Capsule attached to my wired home LAN, in bridge mode. It works fine both as an access point on the upper floors of my home and as a Time Machine device. I also have an Airport Express, whose function in my network is solely to control my whole-house audio system from ITunes. I don't need, want, or use the wireless networking features of the Airport Express. I just have an audio cable running from it to my stereo, and an Ethernet patch cable connects it to my wired LAN. The network mode in the Airport Express is set to "off". Historically, the Airport Express has worked fine in this wired lan mode. However, I unplugged it at some point while having some initial trouble deploying the new Time Capsule and only turned it back on today. After turning it back on I observed something strange. My speedy wireless connection upstairs via the Time Capsule became slow. And when I launched Airport Utility, it drew a network diagram which showed my Time Capsule as a CLIENT of the Airport Express. In other words, the network diagram showed Internet at the top, then a vertical line down the the Airport Express, then the Time Capsule below that. The correct / desired diagram would be the Time Capsule and Airport express as peers. I connected to the Airport Express and verified that network mode was set to "off" but the incorrect network diagram persisted (as did poor wireless performance) until I unplugged the Airport Express. After I did that, the Airport Utility drew the network correctly, although of course it showed a yellow caution sign next to the Airport Express, since it was down. And my wireless speed / reliability returned to normal. What is going on here?

The automatic setup in the airport utility has changed something.
Is the line down to the TC from the express dotted.. in other words is wireless??
Funny stuff happens.
Please post the screenshots of the 3 pages from the airport utility setup for both airport express and TC..
Make sure wireless is set to off in the express.
Both should be set to dhcp on the internet tab and both set to off bridge mode on the network tab.
So for example the bridge on the network tab.
The summary page can also be a help.
There is a half summary page when you click the item in the airport utility.
There is also a fully summary page, when you hold option key and double click the TC icon for example.

Extremely long log on time using Time Capsule and Airport

i'm really confused as to why when I start up my macbook, connecting wirelessly via time capsule and airport that it takes an extremely long time to log in and the internet connection seems unusually slow. is there a setting that's off? when i log on at work to a different router and wireless connection it starts up right away. any advice appreciated.

1. no idea.
2. I get the same issue. Set the brightness at a certain low level - and most often when i performa a full restart of the computer - the brightness is usually at full blast.... I've had this happen for about 5 months now and have never bothered to call in about it - if it hasn't been fixed yet - I'll just deal with it as it only takes a second to correct... but yes - annoying....
3. Same as you - and this is the funny thing...... Mine used to start pulsing immediately when the lid was closed. IT changed for me in the last 2 months or so. That - and also - when performing a shutdown of the computer - it just get a grey sinning circle on the middle of the screen for about 10 or 15 seconds..... very similar to the wait for the pulsing light....
I reinstall OSX every month or so for various testing purposes - and I usually just put all the updates on immediately. next time - i will run the vanilla OSX that came with my re-install cd and check out condition 3 to see if it is an update that has caused that delay.
So - you're not alone/

I have just bought a mac and also have windows installed but how do i change from windows into mac?

I have just bought a mac and need to know how to change from using windows into Mac. When the mac starts up windows come up but i want to use Mac?

To set the default boot volume use the Startup Manager system preferences once you are booted back into the OSX. Then you would only need the option key at boot time to boot into the "other" OS.

I have just bought a ipad and cant get the email link to work that verifies my email address, any idea?

I have just bought a ipad and the link that has been sent to my email acount will not work when i try to verify the email address, i have been sent the link 3 times by apple and none of them work. any Ideas?

Try a Reset [Hold the Home (bottom centre) and Sleep/Wake (top right edge) buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!

I have just bought an iMac, and when I had my PC I had all my mp3 music on external hard drive and used to stream using software called ps3 server and tveristy which used to pick up on my Roberts radio via network wi fi hiw do I get iMac to do it

I have just bought an iMac, and when I had my PC I had all my mp3 music on external hard drive and used to stream using software called ps3 server and tveristy which used to pick up on my Roberts radio via network wi fii and on my iPad via AirPlay. How can I do the same with iMac as this software isn't compatible

To install apps from developers Apple doesn't recognize go to Security and Privacy in the System Preferences and change Allow apps downloaded from anywhere

I have just bought my ipad and have downloaded numbers software. I am having difficulty finding a user guide for numbers on ipad. Can anyone Eli

I Have just bought my ipad and downloaded numbers for spreadsheet work but finding it difficult to locate a good user guide for numbers on ipad. Can anyone make a suggestion.

http://www.apple.com/support/ios/numbers/

I have bought a photoshop elements and have installed it on my MacBookPro. I have just bought an iMac and what to install on this computer as well. The iMac does not have a disc drive. I have copied the file onto a remote hard drive and tried to install b

I have bought a photoshop elements and have installed it on my MacBookPro. I have just bought an iMac and what to install on this computer as well. The iMac does not have a disc drive. I have copied the file onto a remote hard drive and tried to install but it thinks I have a pirate copy. What can I do?

If you click the link in my first post in this thread, then click "still need help? Contact us" it takes you to a page that looks exactly like the page where you started, but isn't. Select PSE for the program you want help with, click "Activation and Signing In" for the problem area and you will see this:
The gray area below the blue bar is a link to start a chat.

I have just bought time capsule and airport works

Similar Messages

Maybe you are looking for