I have just installed Bell fibe into my home ...problems with connectivity
I have just installed Bell Fibe into my home . when it works it is wonderfully fast. That is the problem , it does not connect all the time ...it freezes . I have multiple apple products and they seem to work fine. I was wondering if the fact that my current mac pro is 3 years old makes this incompatible with new technology of FIBE.
It is quite fustrating since Bell does not know why it does not work ...their router seems to be fine. Their seems to be somekind of software conflict .
If your MacBook Pro is the only device having problems,
Try using System preferences > Network > WiFi > ( assist Me ) > Assistant ...
... to set it up gain from scratch, including a new "Location".
If Web pages are sometimes slow to load, and that is your main complaint, see if this link gets you different results -- it should get you Apple's main page in two seconds or less:
http://17.149.160.49
If that is dramatically different from usual, you may have a Domain Name Server DNS problem.
Similar Messages
-
i have just installed itune again. now when i sync it, it show me warning that all existing music will be replace with new itune which is empty. h
ow can i keep my pervious files of music photos and other files and sync with new installed ituneUse your backup copy of your computer to put everything back on the computer.
-
I have not installed the windows drivers yet if that is relevant. here is a video of the problem https://www.youtube.com/watch?v=xR9dQPSIyNg
Welcome to the Apple Support Communities
That's the EFI password. If you don't know the password, the only thing you can do to turn it off is to take the Mac to an Apple Store.
If you know the password, follow these steps to turn your EFI password off:
1. Press Command and R keys while your Mac is starting to start into OS X Utilities.
2. Go to Utilities menu > Firmware Password Utility, turn it off and restart your Mac -
I have just installed Illustrator CS6 yesterday, but I found it was in French. Could help me figure out how to change the language into English?
I got my series number from my Institut (which is in Paris, FR). I do not use Creative Cloud.
When I was installing the software, I cannot select a language.
Could you help me with my problem? Do I have to get a different series number?lunc,
You will have to get a new application in English, to replace the French one.
You, or your Institute will have to get help from Adobe, I am afraid.
You may try a chat here,
Get help with orders, refunds, and exchanges (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-b.html
or (have your Institute) talk to Adobe in France
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html
If you fail to get any help, please report back here, and I will ask a special forum staff friend to try to find the right one at Adobe to have things sorted out. -
I have just installed the Firefox update version 3.6.10. But the menu features are in the Indonesian language. How can I change it into English.
Download the English version of 3.6.16 from here and install it over your current version.
http://www.mozilla.com/en-US/firefox/all-older.html -
Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What should I do, please?
I tried holding the on/off switch down to make it shut down, but when I turned it back on again, the same thing happened and none of the keys etc makes any difference.
HELP!!!! Please.No, what you're experiencing is not normal.
Try booting whilst holding down the Shift key - this will allow you to boot into Safe Mode, disabling third-party kernel extensions, etc. Your Mac will be slow to boot and will operate sluggishly. That's normal. If you can get in using Safe Mode then you have some start-up item that doesn't play well with Mavericks.
Call back,
Clinton -
I have just installed Lion and the text window for web addresses in safari has disappeared. Any ides how to getit back?
Select Customize Toolbar from the View menu, select the item and drag into the toolbar. Place where you want it to be.
-
I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?
And I cant work out why all of my pictures are not diplaying in iphoto?
Is this iPhoto on your Mac? Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11? If so then apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
OT -
Have just turned my beloved into a PC by downloading Mavericks. How do I get rid of it?
Have just turned my Apple into a PC by downloading Mavericks. How do I get rid oif it?
Erase the hard drive, then restore your old system from your backup. Otherwise,
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.
If you originally started with Snow Leopard:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Have just installed ios8 on our iPad. Can no longer send emails via Hotmail. BT email says that if can't work on this device.
When will these faults be fixed?does it error out or does it just not go through?
have you tried to delete and then re-add your hotmail address? Using the outlook preset -
I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?
iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications
-
I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?
I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?
-
I have just installed Photoshop Elements for a MAC. MY photos were in iPhoto, I have 47,000 pictures and my drive on my Mac laptop is not large enough. I store my photos in iPhoto on an external drive. Can I store all my photos on an external drive when using Photoshop Elements? If so, in what format should they be stored in? I do I move them from iPhoto to the new storage location? How do I call them up in organizer? And how do I call them up to Edit? I do not want to store any pictures on my Apple Mac laptop. I want to store pictures on several external devices.
Yes you can store images on an external hard dive and have them referenced in Organizer. It’s best to export copies to separate folders/subfolders and that will ensure iPhoto does not get corrupted.
Alternatively you could continue to use iPhoto with the Elements Editor set up in the iPhoto prefs as your external editing app. Then there is no need to use Organizer and no need to duplicate your images.
You can then call up photos directly from iPhoto as normal with the additional option e.g.
Double-click on a thumbnail to edit in iPhoto editor.
Control (right) - click on a thumbnail to edit in the elements app.
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-iphoto-mac-os.html -
Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple
It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly. -
Is it necessary to keep Lightroom 3 on my computer when I have just installed Lightroom 4 ?
Is it necessary to keep Lightroom 3 on my computer when I have just installed Lightroom 4, or do they use some of the same files ??
Yes, I consider this advisable, too - for the moment.
There may be still bugs in for which the ability to revert to LR3 can be very helpful. E.g. if tone curves are lost: the best intermediate solution could be to open LR3 and save the settings to xmp, then close LR3, open LR4 and read metadata from file.
I might uninstall LR3 probably when LR4.2 might be out...
Maybe you are looking for
-
Cisco IPSec VPN Client and sending a specific Radius A-V value to ACS 5.2
This setup is to try routing Cisco VPN to either RSA or Entrust from Cisco ACS 5.2, depending on some parameter in incoming AUTH request from Cisco IPSec VPN Client 5.x. Tried playing with pcf files and user names/identity stores, none seems working
-
IMac 5k Fullscreen Terminal/Opacity Slow & Sluggish
Hi, i have a weird issue with my new iMac 5k that i have narrowed down specifically to the size of windows with opacity. The issue at first was not very clear, but at certain points when using my iMac 5k, the whole computer would get sluggish. Memor
-
How do I return to a specific cell automatically?
Please forgive me for what is a simple problem which I've encountered since migrating to Mac/Numbers from the dark side... It happens when I am working on a cell in a large sheet (e.g. in cell A1000 in row 1,000 in Sheet1) and I need to view some inf
-
HT1222 Can I download iOS 5 throughout iPad without connect to pc
Can I know how I going to do my ios5 upgrading proses without connect to I tunes
-
Black Window on second screen in Photoshop CS6
Hi Guys, hope you can help me with the following issue. Ive booted my computer up and started photoshop. i use a second screen, its installed automaticly on Mac OSX 1.8. Now, when i drag the file to th second screen, it appears to become black. if i