I have just installed FF v 3.5.8 and it isn't saving my tabs on exit, checked the usual stuff in Options... No probs there.. Help :)
How do I fix this lack of tab saving?
FF doesn't warn me either about all the tabs being open, but I checked the about:config entries and they are OK...
See [https://support.mozilla.com/en-US/kb/Firefox%20does%20not%20ask%20to%20save%20tabs%20and%20windows%20on%20exit Firefox does not ask to save tabs or windows on exit]
Similar Messages
-
I have just installed Snow Leopard 10.6.3 and want to update my Safari 4.0.4 to the latest version. However, the latest Safari version needs at least Snow Leopard 10.6.8. What can I do, please?
Go to the Apple Icon, Top Left of your Screen and Run Software Update...
Or go here > http://support.apple.com/kb/DL1399
and download and Install the 10 6 8 Combo Update...
Be sure to Restart your Mac after the Install. -
I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try. -
I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?
Is this what you downloaded: iTunes 10.7?
When the update fails what if any error report do you get, specifically? Please do this before trying again:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
Hi, i have just scanned some docs via my Ipad and Epson printer. Saved them on a local folder! Where can i see and access this folder?
Welcome
-
please can anyone help ? i have just installed an update from my settings on my iphone 4 within a minute i had the icon for ''connect to itunes ''??
now my phone wont let me do anything ??
i connected it to my laptop and now it says i have to restore it back to factory settings ?? i will lose media and data ?
does this mean i will lose all my photos if i click on continue ?It means that you have already lost all the info that was on the phone. If you backup regularly you can restore from that backup. If you do not backup regularly your data is gone.
-
I have just updated to ios6 on my ipod and the you tube icon has disappeared.
i have turned off restrictions and still can not find it. Also menu settings-general-profiles is incorrect. I have no profiles in general. Can anyone help.Youtube was removed from the list of bundled apps with iOS. You can download the standalone version from the App Store for free.
http://itunes.apple.com/us/app/youtube/id544007664?mt=8
B-rock -
I just got off of "chat" with someone with a very long and unpronounceable name, and he told me that the download links I have found for the various update for Acrobat 9 are no longer active. I already knew that... My question is: where can I get them, then? The files existed at one time, and they must be somewhere... Any help?
Unfortunately, it worked very easily for me - so I have no troubleshooting suggestions. I can, however, post in more detail what I found and what I did...
When I followed the link above, I found a listing of all versions of Adobe revs from 3.x thru 11.x - I clicked on 9.x. In there was listing showing the various 9.x revs: 9.0, 9.1, 9.1.1, 9.1.2, etc. Inside each of these, the next page just shows a "misc" folder. After clicking on that, you finally get to the .msp file that you are looking for. In my case, when I clicked on a .msp file to download it my computer asked me if I was really, really sure because these kinds of files can harm my computer. I said OK, and never encountered any problems.
It is important that you install the files in the correct order, and skip the right ones. Also, some of the folders contain more than one .msp file - so it is important that you choose the right one... I found this list and followed it:
AcroProStdUpd910_T1T2_incr.msp
AcrobatUpd911_all_incr.msp
AcrobatUpd912_all_incr.msp
AcrobatUpd913_all_incr.msp
AcrobatUpd920_all_incr.msp
AcrobatUpd930_all_incr.msp
AcrobatUpd932_all_incr.msp
AcrobatUpd933_all_incr.msp
AcrobatUpd940_all_incr.msp
AcrobatUpd942_all_incr.msp
AcrobatUpd945_all_incr.msp
AcrobatUpd946_all_incr.msp
AcrobatUpd950_all_incr.msp
AcrobatUpd951_all_incr.msp
AcrobatUpd952_all_incr.msp
AcrobatUpd953_all_incr.msp
AcrobatUpd955_all_incr.msp
Most of these require a restart of the computer, which I immediately did. At some point (I wasn't paying attention, since I didn't expect it), Adobe Updater took over after a restart and did the rest of the upgrade in one fell swoop. (I think it was around 9.4.2 or so...)
Hope that helps! -
I have just installed a HP Photosmart Printer B110 and when I try to scan I get this error message;-
"Try scan from computer or see documentation Press OK"
I have a wireless installation printing OK but I am able to scan to my computer. The printer installation left shortcuts on my desktop to "Shop for HP Supplies"," HPSolution Center", "HP Photo Creations" and "HP ePrinerCentre". Non of these seem to have a scan option. Please help, how or what do I do to scan?
Sweet by name sweet by nature
This question was solved.
View Solution.Thanks I contact HP Customer care this was their solution:-
Uninstall the drivers and software.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02259020&cc=us&lc=en&dlc=en&product=4022343&tmp...
1. Deleting all temporary files.
2. Clean Boot
3. Download the Latest software Version of the drivers.
4. Reinstall the drivers and software in New User Account.
1. Deleting all temporary files.
1. Click on Start or Windows Icon >> Run
2. Type %temp%, without quotes
3. Temporary folder will open up
4. Select all the files and folders in that by pressing the keys 'Ctrl + A' and delete by pressing 'Delete' key on the keyboard.
NOTE: If you are not able delete some files, close all the open windows and try.
2. Clean Boot
Note You may experience a temporary loss of some services functionality when you follow these steps. When you restore the settings, the functionality will be restored. However, the original error message or behavior may return.
1. Click Start, type msconfig in the Start Search box, and then press ENTER.
If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
2. On the General tab, click Selective Startup.
3. Under Selective Startup, click to clear the Load Startup Items check box.
4. Click the Services tab, click to select the Hide All Microsoft Services check box, and then click Disable All.
5. Click OK, and then click Restart.
3. Download the Latest software Version of the drivers.
Download the drivers from the following Web site:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cj-82266-1&lc=en&dlc=en&cc=us&...
NOTE: Clicking the link may give an error indicating it is invalid. If this occurs, copy the portion of the address on the remaining line(s) and paste it at the end of the address showing in your browser until the complete address is displayed in the Address box.
The download page will give the option to Save this program to disk or Run this program from its current location. Select the option Save this program to disk.
Save this program to disk
1. Create a folder to save the downloaded file.
2. From the download page, click Download Now. A File Download window will appear.
3. Select Save this program to disk. A Save window as will appear.
4. In the Save In: box, select the location to the folder that was created to save the file in. The file will automatically name itself. It is best to accept the default name.
NOTE: Many of the full HP all-in-one product software program downloads are very large and will take some time to download.
Extract and install the downloaded software
1. To extract and install the software, browse to the downloaded file and double-click the file that was downloaded.
2. Follow the screen prompts to install the HP software.
4. Reinstall the drivers and software in New User Account.
I am up and running with both computers on my homegroup/network
Sweet by name sweet by nature -
Is there any way to re-search my hard drive for mp3s which have been missed on the initial search?
If you've just moved the drive between systems then see Repair security permissions for iTunes for Windows just in case that reveals the missing files. Apply to a single album folder first as a test. Otherwise, if you've not done too much with the drive since things went missing, an undelete tool might recover the lost media. FreeRecover looks promising... Select the drive, use the options to get file paths and check file integrity, then, presumably, you can restore anything that has been deleted that looks recoverable. Backup to another drive when you're done.
tt2 -
I have an iPod Touch 64gb. I have 149 gb of .wav or similar format music. I have created a music library with the latter. How can I convert this library
into .AAC format so that the syncing process will be seamless? Should I create a new folder for the .wav files and put the .AAC files into
a subfolder in the itunesmedia folder? If so, how do I get itunes to put these files in that folder?
Thanks.was this ever addressed
-
I have been having problems downloading apps for a while now. I only just downloaded IOS 7 but I thought it would help me, it hasn't.
I go onto the app store to download and app, i enter the correct passwrd and the apps icon appears to be downloaded. The waiting sign appears on the icon and then the icon itself disappears, then on the app store it looks as though i have never tried to download it! PLEASE help! i didnt get Flappy Bird because of this issue! lolHi Nerdyninja12,
Thanks for visiting Apple Support Communities.
Try this step first if an app download on your iPad is not completing:
Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
App updates won't download on my iPhone, they just say waiting.
https://discussions.apple.com/thread/4111336
If the download still does not complete, force close and re-open the App Store. Here's how to force close an iOS application:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app's preview up to close it.
These steps come from this article:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
All the best,
Jeremy -
is there a way to seperate mailboxes in ios7. now all emails are appearing in my work email folders (personal + work). before i could select now i just have all mailboxes..
You can switch between different mailboxes
Click on Mailboxes in the top right and you should be able to select between different inboxes. -
lost ratings from itunes libarary following transfer to new mac book pro
[user]/Music/iTunes
You'll find the library files there.
iTunes Library Extras.itdb
iTunes Library Genius.itdb
iTunes Library.itl
iTunes Music Library.xml
THOSE files contain your Library information, and the need to be moved to the same folder on the new Mac. -
I have just installed os7. How do I close apps when I double click on home button
I have just installed os7. How do I close apps when I double click on home button
Swipe to the app you want to close, press and hold the large image and swipe up and off the screen
Maybe you are looking for
-
Limit Memory usage on Exchange Store
I am looking to limit the Exchange Store. Our Exchange server contains all roles and is being installed to replace a current Exchange 2003 server. Currently all mail now flows through the Ex2k10 server and 5 users have been moved to the new server. T
-
Client EJB JNDI lookup broken in OC4J 9.0.2?
I have a client program that connects to an EJB in the application server and invokes methods on it. If it look up the EJB using the actual JNDI binding, it works fine. If I look it up in java:comp/env (and use the ejb-ref in application-client.xml a
-
I need help clearing or removing i just dont get it my daughters ex boyfriend did this. i need my stuff private
-
Update problem , getting iphone 4 out of recovery mode
How can i get my iphone 4 to work after recent update when I get this message' itunes has detected an iphone in recovery mode . you must restore this iphone before it can be used with itunes.' i have a itunes logo and usb display on screen and nothin
-
Firefox 3.0 osx not displaying correctly
Why does the site I am working on render correctly in most browsers except for firefox 3.0 osx? I tryed editing the main contents left margin to allow the sidebar1 to drop down but no luck. The site link, http://www.thepenrecording.com The code needs