I have just installed Mavericks OS, and now cannot use iPhoto. Any advice?
I have just installed Mavericks OS onto my macbook pro, and now find that I cannot access iPhoto. Does this mean that my photographs are lost, or can I install an update for iPhoto which will correct this?
Did you install the new iPhoto? Were your pictures lost?? I stopped the downloading thinking I can still retrieve my pictures..
Similar Messages
-
I have just installed Mountain Lion and now Acrobat Pro 9.5.5 won't launch. Is there a fix?
I have just installed Mountain Lion and now Acrobat Pro 9.5.5 won't launch. Is there a fix?
I tried uninstalling the plug ins and installing Reader based on advice in another post but it didn't work.What's your system? windows?
[url deleted by host]
Message was edited by: Michael.lu [url deleted by host]
Message was edited by: Michael Kazlow -
I have just updated my iPad and now cannot access any apps as they just close down straight away. Any ideas why and how to solve?
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
I've also seen it suggested that people try downloading a free app from the store onto the iPad (as that seems to reset something), and then re-try the apps - the free app can then be deleted. -
I have just installed Snow Leopard, (10.6.3) onto my Macbook Pro and so far it seems to be working fine except that I can't access my gmail account. I can sign in but the blue opening indicator freezes near the end and I can get no further. I'm a bit of a novice at this stuff - help please!
I would run the combo update to get to 10.6.8 in order to get the latest security updates and so forth. Then run Software Update until you system is current.
10.6.8 Combo Updater
G-mail problem.
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
IMAP or POP setup? -
I just installed office 365 Home Premium editiion and have lost my ICloud capabilities. I cannot sign in nor will Photostream work. A message comes up that says I need Outlook on my computer (I had it before the 365 was loaded). I checked on-line and it says that windows 7 does not support outlook and that I cannot download it (don't know how I got it before). I am totally confused as what to do. Really upset as I needed the new office package as Windows 7 wouldn't support the 2010 started edition any longer without my buysing that. Figured it made sense to get the newest version. Packaging says that it contains outlook. I don't know what to do at this point.
LuckyAlP wrote:
I just installed office 365 Home Premium editiion and have lost my ICloud capabilities. I cannot sign in nor will Photostream work.
Did you remove the existing installation of Office before installing the new one?
I checked on-line and it says that windows 7 does not support outlook and that I cannot download it (don't know how I got it before).
Outlook is part of Office 365, and Windows 7 supports all versions of Outlook back to 2003.
I am totally confused as what to do.
You need to correctly remove all versions of Office on your Mac, you need to remove their settings as well. You need to save your Office Userdata from removal by moving it temporarily. I would also uninstall iCloud.
Then reinstall Office 365 followed by iCloud. -
i just installed itunes 12 and now when i plug my ipod into my computer it won't sync I have tried different ipods still nothing
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What should I do, please?
I tried holding the on/off switch down to make it shut down, but when I turned it back on again, the same thing happened and none of the keys etc makes any difference.
HELP!!!! Please.No, what you're experiencing is not normal.
Try booting whilst holding down the Shift key - this will allow you to boot into Safe Mode, disabling third-party kernel extensions, etc. Your Mac will be slow to boot and will operate sluggishly. That's normal. If you can get in using Safe Mode then you have some start-up item that doesn't play well with Mavericks.
Call back,
Clinton -
I have just downloaded OSX Yosemite and attempted to use photoshop CS5 but was prompted to install JavaForOSX2014-001dmg and now photoshop won't open saying ' an unexpected and unrecoverable problem has occurred.photoshop will now exit". ??
Can I revert to the older operating system?
I am not familiar with tech speak, so plain english please. Thank you in advance.Do a backup, preferably 2.
Revert to a Previous OS X
Revert Yosemite to Mavericks -
I have just installed Mountain Lion and received a message "speech synthesis server.app could not be opened because it is damaged or incomplete", please can you advise me what to do next? Thanks
Something went wrong with your upgrade.
Back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. -
Just installed OS Yosemite, and now I can't open Illustrator CS6. Asks me to update my Java, but I check and my Java is up to date. Please help!
Some people have reported reinstalling the Apple 2014-001 Java update has helped.
See thread 7 here Illustrator CC 2014 crashes on startup after Yosemite 10.10 upgrade today. -
I have just installed mavericks OS.My epson printer does not want to work with it .What can i do?
I HAVE JUST INSTALLED MAVERICKS OS.IT APPEARS IT IS NOT COMPATIBLE WITH MY PRINTER WHICH IS AN EPSON WORKFORCE PRO WP-5630 SERIES 2.What can i do about this problem?
Hello Baldy7,
It sounds like after updating to Mac OS X 10.9 your printer is no longer working with the computer. U want to recommend these steps from the article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Additional Information
Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB. For more details, see this article.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I just installed snow leopard and now my itunes won't recognize my iphone. how do i fix this?
I just installed snow leopard and now my itunes won't recognize my iphone. how do i fix this?
http://support.apple.com/kb/TS1591
You may have to remove & reinstall the AMDS, as described in that support article. -
I have just updated to Lion and now my folders no longer show number of items on the bottom. Is there a fix for this? I allways found that handy. Now I have to click on an icon on the top, This is a backward step if that is now the only way to see the number of items. Am I missing something obvious?
Parrotcat wrote:
I have just updated to Lion and now my folders no longer show number of items on the bottom...
In the good old days of Snow Leopard, an open Finder folder had a border along the bottom of the window which could show the number of items in that window and the total available space on the hard disk or partition that folder resides on. That bottom border is gone in Lion and those two bits of information are gone with it. Is that what you're talking about? If so, I'd like to learn how to get it back too and "Show Item Info" is not the way. -
I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!
Paldeng, thanks for the suggestion. I've done all that. I can connect to the server, but apparently they are not recognizing my ID and password. I can use the server program if I don't go through Mail (using the same ID and password). My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do. His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume). We can receive email in Mail, we just cannot send.
I contacted my service provider, and we went over my connections. They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired. Apple swears it is not their problem, it is the provider, so here I sit. My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely. The thing is, we had not messed with any of those settings, so what changed? I just did not want to bother my son again, as he has many other demands on his time.
Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard. I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update. Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections? -
I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?
I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?
Maybe you are looking for
-
Hello, We have a simple need to load all data from a master table into an object in Java. We have written a simple query in Oracle and created a SP with a Ref_Cursor to return the data like below. The underlying table has 500,000+ records. If I run t
-
TRANSITION PROBLEM---won't work properly
I am doing a short 3 minute piece and all of a sudden my transitions do not work correctly. the piece is nothing but footage from my camera...and some photos...the photos have transitions in between them, and this was done without any problem, now i
-
Leopard, can it run without core image?
well i got an ibook g4 from my friend and i bought leopard disk new from ebay it was boxed and all well anyways i want to install leopard on my ibook which is running 10.4.11 the specs are 1.7 ghz 786 ram 60 gb hard drive my question is that i think
-
How to Create simple WCF/REST (JOSN,get and post) and deploy to Sharepoint 2013 Server.
HI All, I wan to create a simple WCF/REST service and deployed to SharePoint server , i have created some sample svc file and put in to _vti_bin folder using SharePoint solution using vs 2013 but its not accessible from IIS its always asking the W
-
Oracle 8i EE Solaris 7 install problem
Install 8i(8.1.7) with minimal(or typical) option. Everything went fine until it stalled at step "initializing database" during creating a startup db, with error message "ORA-03114, not connected to Oracle". I ignored it, and then it comes with anoth