I have just installed win 8 pro 64bit. I have also updated firefox to 16.0.2 latest update.The browser is freezing as soon as I type any web address

with the new win 8, firefox is freezing.

I am getting 'stop script' pop up for any website. I tried all the trouble shootings mentioned infact I even installed Firefox again but the problem is still there.

Similar Messages

  • HT1846 My iMac 24" is mid 2008 and I have just instaled Win7 Pro 64 bits. All went well execpt...

    Hello everybody,
    My iMac 24" is mid 2008 and I have just instaled Win7 Pro 64 bits. The windows installation went very well, except wen I starte to use the Boot Camp CD for the drivers and then I have this error "Boot Camp x64 is unsupporteded..." So I had to instal everything in the CD one by one and went quite well. The only thing that I can not install is the Boot Camp itself! So I do not have any windows control over the Boot Camp. How can I solve this issue?
    Thanks

    Follow the steps in this guide...
    http://michael.anastasiou.me/index.php?option=com_content&view=article&id=22:qbo ot-camp-x64-is-unsupported-on-this-computer-modelq-solution&catid=7:how-to&lang= en
    Then install the following Bootcamp Updates:
    BootCamp 3.2 Update 64-bit
    BootCamp 3.3 Update
    Hope this helps!
    Message was edited by: vea1083

  • TS2565 I have just installed logic pro  Version 9.1.1 to my new mac book , purchased in 2012 December. I am now being told my version of logic is not compatible with my version of OS X. Help!!!

    I have just installed logic pro  Version 9.1.1 to my new mac book , purchased in 2012 December. I am now being told my version of logic is not compatible with my version of OS X. Help!!! What can I do. I tried upgrding the logic pro software but this didn't help. It still won't open.
    Many thanks

    How did you install Logic onto your new Mac Book?
    From the App store or from the DVD boxed set?
    If it was downloaded from the App store then it should already be v9.1.8... and if it isn't you need to call Apple to help you sort this out.
    If it was originally from the DVD boxed set then you must update using software updates....
    If software updates cannot find Logic to update it then you either have...
    Renamed the Logic Pro app in which case rename it back to Logic Pro
    or
    The Logic Pro App is not in the applications folder which is where it needs to be to be updated... so move it back there.

  • I have just purchased Quicktime Pro but Trim does not display IN and OUT options. It trims to the frame on display.

    I have just installed Qicltime Pro but when I edit a video file and try to set the In and Out points, it does not show any way to set them. It trims the video down to the one point on display. Have I installed the software correctly?

    QuickTime Player 7 Pro is in the Utilities folder.
    To set in and out points set the position you want in the timeline and tap the i key. Move to the end of your selection and tap the o key. To step frame by frame move the playhead by tapping the left/right arrow keys.

  • I bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do hlp?

    i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do to install my bootcamp and apple software in win 8
    thanks in advance,,,

    ahmad_uetlhr09 wrote:
    i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook
    Boot Camp does not come on DVD, what did you install.

  • I have 10.6.8 and am just installing logic pro 9. I am downloading the extra 20gig of material. I am installing Logic on my laptop as well and dont want to download the extra 20 gig again. How do i go about transferring it from the computer to the laptop?

    Hi
    I am using OS 10.6.8 and just installing logic pro 9. I am downloading the extra 20gig of material - the additional content packages. I am installing Logic on my laptop as well and dont want to download the extra 20 gig again. How do i go about transferring it from the computer to the laptop?
    Thanks

    And now a second newbie question. I have downloaded the additional content and booted up logic for the first time, but the apple loops have not installed and logic is asking me to reinstall the apple loops. But how do I do that? I can see they are in the libray so have downloaded.
    Thanks

  • Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What shou

    Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What should I do, please?
    I tried holding the on/off switch down to make it shut down, but when I turned it back on again, the same thing happened and none of the keys etc makes any difference.
    HELP!!!! Please.

    No, what you're experiencing is not normal.
    Try booting whilst holding down the Shift key - this will allow you to boot into Safe Mode, disabling third-party kernel extensions, etc. Your Mac will be slow to boot and will operate sluggishly. That's normal. If you can get in using Safe Mode then you have some start-up item that doesn't play well with Mavericks.
    Call back,
    Clinton

  • I have just installed Mountain Lion and now Acrobat Pro 9.5.5 won't launch. Is there a fix?

    I have just installed Mountain Lion and now Acrobat Pro 9.5.5 won't launch. Is there a fix?
    I tried uninstalling the plug ins and installing Reader based on advice in another post but it didn't work.

    What's your system? windows?
    [url deleted by host]
    Message was edited by: Michael.lu   [url deleted by host]
    Message was edited by: Michael Kazlow

  • We have just installed  Lion  and now cannot connect to MyExpat

    we have just installed OS X Lion, v10.7.2  and now cannot connect to MyExpatNetwork on my Macbook pro. Any suggestions?

    yeah-find out where you're downloading stuff to, and stick with it. I'm using FireFox and tell it to save the driver and stuff on the desktop, and when I quit FireFox, there it is on the desktop. you'll also need your admin password. It should show up as a .dmg file, then double-click on it to open it. You should see "Brother.pkg" . start up brother.pkg (double click??) and folow the instructions that ought to appear to install the printer driver.  If the .dmg file doesn't mount, use Disk Utility** to mount it and get it working. Then you should see the package.  and then you can install it.
    ** you may have to click on the .dmg file and choose "Get Info" then Open with, then choose disk utility, and then open with then change all. then close it. Hopefully that ought to work. If you cannot remember your admin password, I can't help you right now. Looks like you'd need it, to let Brother install that printer driver.
    well, enough for tonight
    if this didn't help you, then ask me again tomorrow
    John b

  • I have just installed mavericks OS.My epson printer does not want to work with it .What can i do?

    I HAVE JUST INSTALLED MAVERICKS OS.IT APPEARS IT IS NOT COMPATIBLE WITH MY PRINTER WHICH IS AN EPSON WORKFORCE PRO WP-5630 SERIES 2.What can i do about this problem?

    Hello Baldy7,
    It sounds like after updating to Mac OS X 10.9 your printer is no longer working with the computer. U want to recommend these steps from the article named:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Additional Information
    Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB.  For more details, see this article.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I just installed Acrobat Pro for Mac.  I would like to set it up to go into the regular program home

    I just installed Acrobat Pro for Mac.  I would like to set it up to go into the regular program home page (just like the windows based) instead of the "getting started" window.

    Good day,
    Choose Acrobat > Preferences.  Click 'General'.  Uncheck the 'Show welcome screen' option under Application Startup.
    Please let me know if you have any questions.
    [moving thread to correct forum]
    Kind regards,
    David

  • Help please! I have just installed Snow Leopard and now I can't access my gmail account. I can complete the sign in boxes ok but the blue indicator bar freezes and prevents access to my emails.

    I have just installed Snow Leopard, (10.6.3) onto my Macbook Pro and so far it seems to be working fine except that I can't access my gmail account. I can sign in but the blue opening indicator freezes near the end and I can get no further. I'm a bit of a novice at this stuff - help please!

    I would run the combo update to get to 10.6.8 in order to get the latest security updates and so forth. Then run Software Update until you system is current.
    10.6.8 Combo Updater
    G-mail problem.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages
    IMAP or POP setup?

  • I have just installed Mavericks OS, and now cannot use iPhoto. Any advice?

    I have just installed Mavericks OS onto my macbook pro, and now find that I  cannot access iPhoto. Does this mean that my photographs are lost, or can I install an update for iPhoto which will correct this?

    Did you install the new iPhoto? Were your pictures lost?? I stopped the downloading thinking I can still retrieve my pictures..

  • Just installed Premiere Pro but I can't seem to launch it.

    I have creative cloud and just installed Premiere Pro. It's showing installed but I can't seem to launch it. The mouse pointer won't turn to a hand over the icon in CC. I have tried to uninstall it and then re-installing it but it's the same problem. There is no shortcut/ icon to open it and when I locate to program file in c: there is only a folder containing two other folders named AMT and Legal. I have searched this forum and seen that many others have the same problem but no one seem to offer any solution. Does anyone have an answer on how to fix it and open Premiere Pro?

    It requires minimum 8GB RAM and 64 bit operating system so That's the solution for my problem, buy a new computer. Hope it will help someone else by knowing this

  • I have just installed Bell fibe into my home ...problems with connectivity

    I have just installed Bell Fibe into my home . when it works it is wonderfully fast. That is the problem , it does not connect all the time ...it freezes . I have multiple apple products and they seem to work fine. I was wondering if the fact that my current mac pro is 3 years old makes this incompatible with new technology of FIBE.
    It is quite fustrating since Bell does not know why it does not work ...their router seems to be fine. Their seems to be somekind of software conflict .

    If your MacBook Pro is the only device having problems,
    Try using System preferences > Network > WiFi > ( assist Me ) > Assistant ...
    ... to set it up gain from scratch, including a new "Location".
    If Web pages are sometimes slow to load, and that is your main complaint, see if this link gets you different results -- it should get you Apple's main page in two seconds or less:
    http://17.149.160.49
    If that is dramatically different from usual, you may have a Domain Name Server DNS problem.

Maybe you are looking for

  • Can I delete all the contacts from Facebook in my phone contact list.. !!!

    I am a new i phone ower...  had Droid for over 4 years..   Currently... I miss my Droid!!...  iphone seems to control me.. and I hate that I have to use itunes..   Now it tells me (iphone 5).. I can not delete those off my phone contacts from Faceboo

  • MDN not authenticated

    Hi All, Good day. I searched and read the forums for "MDN not authenticated" error but it seems that our issue is quite different. The scenario is that we have a trading partner wherein we are sending PDF files to them via AS2. The trading partner is

  • Blurred photos in slideshow

    Hi, Every 3 months of so I create a project in iDVD with my latest movies and photos. I create the movies in iMovie and use the slideshow function in iDVD for my photos. I upgraded to iLife'11 in December. The photos look fine in iDVD, but when I hav

  • Ssh version

    I get the following output when I type in ssh -V on the console...I am using Solaris 9. SSH Version Sun_SSH_1.0, protocol versions 1.5/2.0. Does this mean tht the ssh version is ssh protocol v 2.

  • Problem in IDOCS

    Dear All Transaction VL71 when executed, generates an IDOC which creates a file. This file is used to run a Z-Application. The system was running fine untill a few days ago. Now When VL71 is run, it gives an error. When we check through SMQ1 transact