I have just updated Java plugin but it still shows that it needs to be updated

I have just updated Java(TM) platforn SE 7 U5 10.5.1.255 but it still says that it needs to be updated. Please help me with solving this issue. Thanks

Hello,
Please make sure where you are asking to be updated is a legitimate detector.
To protect against potential Java vulnerabilities, Firefox now asks you to activate Java by default, for each website you visit that uses Java. When you see an "Activate Java" message box, simply click it to load the Java content normally.
[[Image:Fx24-JavaActivate]]
If there is no visible area to activate Java content in the page, click the plugin icon in the address bar. In the message panel that opens, choose "Allow Now" to enable Java content temporarily.
[[Image:Fx24-JavaAllowNow]]
The next time you visit the site or any other that uses Java you will see this message again. If you want to always activate Java for a particular site, you can use the "Allow and Remember" option shown above.
For more information about using Java in Firefox, see the articles [[How to allow Java on trusted sites]] and [[Use the Java plugin to view interactive content on websites]].
'''Important:''' After activating Java, you may see a security prompt, asking you to confirm that you want to run Java, or you may see an "Application Blocked" message, depending on the website and your security settings in the [http://www.java.com/en/download/help/jcp_security.xml#control%20panel Java Control Panel]. These messages come from Java itself, not from Firefox.
For help with Java security prompts and "Application Blocked" messages, see the Java Help pages [http://www.java.com/en/download/help/appsecuritydialogs.xml What should I do when I see a security prompt from Java?] and [http://www.java.com/en/download/help/java_blocked.xml Why are Java applications blocked by your security settings with the latest Java?]
Does this solve your problem? Let us know.

Similar Messages

  • TS4009 How do I clean up mail in my icloud?  I have already deleted old mail on all devices, and emptied the junk & deleted files, but it still shows that I am at max on my icloud. What do I do to free up space? (photos & apps do not take up that much roo

    How do I clean up mail in my icloud?  I have already deleted old mail (from all my e-mail accounts) on all devices, and emptied the junk & deleted files, but it still shows that I am at max on my icloud. What do I do to free up space? (photos & apps do not take up that much room).  When I go to manage storage on any device & it will display how much room each program or app is using, it still shows that my e-mail is taking up the most room.  Is there a way to actually log on to the icloud server to manage what it stored there?  If so, how do I do it?  Also, on a related subject,  why does my mail not sync accross all devices?   ie. when I delete an email on one device, why do I still see it on all my other devices?  How can I change this?
    I have an iphone5, ipad2, ipod 4th gen, ipod 3rd gen, all running on my same apple id - but I have a PC not a Mac home computer - is this part of the problem?  Looking to upgrade to a Mac sometime this year...
    Thank-you for the help!

    beckyfromoz wrote:
    I do have the Time Capsule and spoke to Apple Care here in Sydney about it yesterday.  They told me my mail is not backed up there unless I create a special folder. I just tried ringing them again but Apple Care is closed today...
    Mail is backed up automatically. If you make backups automatically, open Mail application and then, open the Time Machine app (in /Applications/Utilities). You will access to the Time Machine interface, and you will be able to see all your mails of all the backups you have, and you will be able to restore them. It means that your mails are backed up onto the Time Capsule

  • How do I uninstall Mackeeper?  I have dragged it into trash, but it still showing in systems information and causing problems!

    How do I uninstall Mackeeper?  I have dragged it into trash, but it still showing in systems information and causing problems!
    Please advise

    How to uninstall MacKeeper - updated
    How to Remove MacKeeper
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item.  Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Here is a selection:
        1. AppZapper
        2. AppDelete
        3. Automaton
        4. Hazel
        5. AppCleaner
        6. CleanApp
        7. iTrash
        8. Amnesia
        9. Uninstaller
      10. Spring Cleaning
    For more information visit The XLab FAQs and read the FAQ on removing software.

  • I have installed the java plugin but it does not appear in my add-on list. I have RedHat linux OS using the Firefox 24.2.0 browser.

    I have already followed your advice for removing the plugins.dat file from the .mozilla directory. The plugin still hasn't appeared in the add-on list. Does anybody have any idea what could be going on?

    See:
    *http://kb.mozillazine.org/Java
    *http://kb.mozillazine.org/Determining_plugin_directory_on_Linux
    *https://developer.mozilla.org/en/Gecko_Plugin_API_Reference/Plug-in_Basics#How_Gecko_finds_plug-ins

  • Hi, I have recently bought an I pad 2, 32Gb with just wi fi. I have being putting stuff on and taking stuff off, just generally getting to know it. I have now deleted evrything on it but it still shows that i still have 1.87 GB on it in "other".

    Hi,
    I have recently bought an I pad 2. I have been playing around with it, putting films on then taking them off. I have now deleted everything on it but it shows I still have 1.87GB on it in "other".
    What does this mean?

    That happened to me and I read on these forums that it indicated corrupted files. I restored the iPad as new and the problem was solved.

  • My 80 GB classic won't read the files I have synced up to it over the past 4 years, but it still shows that the files are still in there somewhere. How can I recover those files?

    I manually manage my music on my iTunes library. Once I have it downloaded on my laptop, then click and drag it to my iPod, I delete the files from my computer to save memory space. So I basically don't have ANY back-ups to over half of the music that was on my iPod. The other week I did what I usually do to add music to my iPod, but once I disconnected it fro  my computer, my iPod said there was no music, movies, or anything on there. If you highlight over the Settings it reads that there are still 60 GB of space free out of 80 GB. How can I recover those files that are clearly still on my disk without erasing everything I installed into it?  

    In my Computer, click the  iPod icon ->Properties->Tools->Error Checking
    Click Check Now.
    If it doesn't help, you have to use 3rd Party apps to recover these lost files, as the iPod filesystem got corrupted.
    iPodAccess http://www.findleydesigns.com Mac/Windows,
    or refer to this earlier posts by Limnos
    Good Luck!

  • I deleted an app from my mac but it still says that i need an update but i can do this because i downloaded it from another apple id

    what to do?

    Ignore it unless you actually now want the application. In that case redownload it then update it by logging into the App Store with the other Apple ID.

  • I keep downloading Firefox 8.0 onto my computer but it still shows that I am running 3.5.6 (something like that). How do I get the downloads to actually install and then run?

    I keep downloading Firefox updates of 8.0 but it says I am still using 3.56 (something like that). How do I actually install the Firefox updates and then run them? They are downloaded but apparently they are not running. How do I make them run?
    My current version of Firefox continues to (not responding) when I try navigating and it is very frustrating. I am ready to uninstall Firefox and go back to Explorer. Help.

    found a fix... had this today.
    I deleted FirefoxExtensionsSetup within this folder:
    HD/Applications/Adobe Contribute CS5.1/SupportFiles/FireFoxExtension
    Then Firefox worked.
    Good luck to all... delete at your own risk.

  • HT1212 I cannot remember my iphone passcode, and i reset it with my computer, but it still says that i need a passcode to get into it.

    I just recently got an iphone and put a passcode on it and i forgot the passcode. So i went online and reset it and did what the website told me to do. But it is still requiring a passcode.

    There are two things to try. If the first thing you try fails, try the next.
    Two Button Reset.
    This is the least likely to result in loss of data.  Read that again, especially the phrase "least likley."
    Unplug the iPad from the computer.
    Press and hold both the home and the sleep/wake buttons (ignore the red slider) until you see the silver Apple logo.
    When you see the logo, let both buttons go.
    If this worked, you should see an icon instructing you to connect to iTunes.  My guess is that the reset did not work.
    DFU Restore
    This will very likley result in loss of data.
    Plug the iPad into the computer.
    Ensure that it is running the latest version of iTunes and that it has access to the internet.
    Press and hold both the home and sleep/wake buttons for exactly eight seconds.
    Release only the sleep/wake button but continue to hold the home button for another five seconds.
    Let go of the home button, then look at the computer screen for an instructional popup.
    The popup should say "iTunes has detected a device in recovery mode. . .(etc)"  Click accept to all boxes and let iTunes download and install all of the latest device Firmware and Software.
    If no popup appears, repeat the above DFU instructions.  If you 've never done a DFU, it may take about three attempts to get the timing right.

  • Just joined Adobe Cloud and it still shows that it's processing after an hour!

    What do I do. I just joined Adobe Creative Cloud and my screen says it's processing and do not hit the back button or you will be charged twice. It says it will only take few minutes. It's been saying it's processing for an hour! I need help.

    Hello cposey98,
    I have checked your account and seen you have been in contact with our customer support.
    Please, do not hesitate to come back to us if you have any questions.
    Thanks.
    Arnaud.

  • I have just updated my photoshop cc, but now when I go into filters it does not show my Topaz or when i go to automate it does not bring up my Perfect photosuite 8

    I have just updated my adobe cloud programmes, but when I am in Photoshop cc 2014 it now does not bring up my Topaz Filters or my Perfect Photosuite8, any ideas please

    As a workaround, I placed shortcuts from my Topaz plugins in my old CC 64bit plugins folder, in the plugins folder of CC 2014 64bit.  The plugins seem to work ok in CC 2014.  Note that CC 64 bit itself is uninstalled but the plugins folder remains.
    I know this is not good practice but it works and I'll stick with it till there's a solution from Topaz or Adobe.  The advice from Topaz so far was not helpful.

  • I have just updated my plug in & add ons, but they are several that say to research. How do I know what plug ins are necessary for mozilla to run properly. I really don't want a bunch of unnecessary downloads on my computer

    I have just updated my plug in & add ons, but they are several that say to research. How do I know what plug ins are necessary for firefox to run properly. I really don't want a bunch of unnecessary downloads on my computer

    None are '''''necessary''''' to use Firefox, but some parts of some web pages aren't going to work without a specific plugin being installed.

  • I have just updated to Yosemite, but now I can't get the custom shortkeys to work. In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution. Does anyone have the problem? All the other shortcuts work!

    I have just updated to Yosemite, but now I can't get the custom short-keys to work.
    In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution.
    Does anyone have the problem? All the other shortcuts work!

    Hi Thomas,
    I can confirm the problem you are hitting. The XML test trace does not get recognized at all, and it defaults to Eclipse's basic Open File behaviour. I am not sure if it's because the format definition is missing, or if it's because something prevents the trace type from being recognized. I will open a bug about it.
    Thanks for identifying this issue!
    In the meantime, if you'd like to experiment with XML analyses, you can also take a look at the example at https://github.com/tracecompass/xml-analysis-example .
    Cheers,
    Alex

  • I have just updated my iTunes to 11.1.3. I followed all correct steps, restarted my computer etc. But iTunes will now not open no matter what I try and do. Please help me!!!!!!!!

    I have just updated my iTunes to 11.1.3. I followed all correct steps, restarted my computer etc but now I cannot open iTunes not matter what I try and do.
    Very frustrating. Have read the trouble shooting info on Apple website but nothing has worked.
    Someone please help. I cannot access any of my music.

    Open Finder. Go to the "Go" menu in the menu bar. Press and hold Control and click on Library. Go to "Preferences". Find a file named, "com.apple.iTunes.plist" and delete that file. This won't delete your iTunes content. It will reset iTunes. Try it again.

  • HT4623 I have an ipad 2 on ops 4.3 and have just updated to 7.1 via itunes. I backed up first and have synced repeatedly but keep getting a message on my ipdad screen that the ipad is not set up - I chose the set up option restore from itunes back up

    I have an ipad 2 on ops 4.3 and have just updated to 7.1 via itunes. I backed up first and have synced repeatedly but keep getting a message on my ipdad screen that the ipad is not set up - I chose the set up option restore from itunes back up

    To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
    Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit.

Maybe you are looking for

  • Booklet: clean install Windows 7 Starter on Kingst...

    I bought a Kingston SSDNow V+180 SVP180S2/64G 64GB to replace the original HDD. I had a lot of trouble cloning the drive (or actual the restore operation). Both restoring the Windows partition and the System partition failed. I decide to start from s

  • Phone contact numbers replaced with Skype number

    I have Skype mobile on my Android phone. Everytime I get a Skype call, one of my phone contact numbers get replaced by the Skype number. I don't realize it until I try to call that contact and see that it has a 1-404- number, or when I get a Skype ca

  • Passing values to the dropdown in Adobe Interactive form

    Hello Adobe Experts, Can you please provide some inputs for the below mentioned points. I have created a webdynpro application and placed an interactive form. 1. I have 2 dropdown fields in the interactive form..say Country and State. How can i show

  • Best Practices Portal Migration

    We are planning at the moment an database switch on our portal systems. Our systems are running on EP 7.0 SPS 14 and as the database we are using at the moment Oracle. We want now to switch to DB2. The operating system stays untouched on AIX. Mainly

  • Business Objects and Internet Explorer 9

    What patches are required to run Internet Explorer 9 with Business Objcets? I upgraded to test the compatibility and am receiving a lot of errors when I try to open a WEBI. Thanks