I have just updated my ipad mini with the new ios software and it has caused may ipads onboard keyboard to run very slowly does anyone no how to fix this issue
I have just updated my ipad mini with the new ios software and it has caused may ipads onboard keyboard to run very slowly does anyone no how to fix this issue
*Typing lag iOS 7*
Settings>General>Reset>Reset all settings. This should improve the typing responsiveness
*Note:* Settings, preferences, network settings, etc will be reset. *NO data or media will be lost*
and/or
Settings>iCloud>Documents and Data (turn it OFF)
Similar Messages
-
I have itunes 9.2.1 (4) and when I go to make a purchase it keeps timing out does anyone know how to fix this?
Hi Beege140,
I have an article for you that will help you address this launch issue with iTunes:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip. I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?
This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host > -
Update my iPhone 5 to iOS 7 days ago and still neither my iMessage nor FaceTime will let me log in and I am only spastically getting even normal texts. Does anyone now how to fix this issue?
ACTIVATING FACETIME AND IMESSAGES
Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS. Check with your carrier to see if your plan supports sending of international SMS messages. If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)). Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation. If that does not fix things read the following articles:
http://support.apple.com/kb/TS4268
http://support.apple.com/kb/ts3367 -
I updated my iphone to OS 5.0.1 and i can not add events to my iphone calendar- does anyone know how to fix this issue?
I updated today to the 5.0.1 and now when I try to sync to ITunes, it doesn't recognize my phone and an error message comes up saying that "This iPhone cannot be used because the Apple Mobile Device service is not started.' What does this mean? Never mind - I found an article in the Support about this very thing! Thanks!
Message was edited by: Peytsmom -
I have a Macbook Pro 2009, i upgraded from 10.5 to 10.8.2 and now when I put it to sleep it shuts down. Does anyone know how to fix this?
That disk from her computer is a machine specific version, you need this disk
http://store.apple.com/us/product/MC573Z/A
and follow these instructions
How to erase and install Snow Leopard 10.6 -
I have a late 2011 Macbook and whenever I open any application it opens only the top menu bar and no viewer windows.I always have to click cmd n to open new windows and it is quite annoying.Does anyone know how to fix this issue? Thx
You may have more of a chance getting a quicker answer here:
https://discussions.apple.com/community/windows_software/windows_compatibility -
Hi All,
Having a slight panic. I just updated my iphone 4s to the new software...was transferring my photos to my iphoto app on my macbook. I then realised that ALL of my recent photos (including albums) were no longer in my camera roll etc....
I cannot remember if I backed up before doing so (pretty sure I did) but I have tried using Wondershare Dr.Fone to recover them as well as searching my backup library on my macbook.
They MUST be somewhere?! Can anyone help??
I realised suddenly when all the recent 100s of photos on my iPhoto were blank...!
Bee xHey Gavinchick,
Thanks for the question. I understand you are experiencing issues after updating your iPhone to iOS 7.0.6. If you have not already done so, you may want to restart or reset the device:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above steps do not resolve the issue, you'll want to restore your device with iTunes in recovery-mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If your device is not recognized in iTunes for Windows while in recovery-mode, see this article (specifically Step 4):
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M. -
Hi everyone, I need some help big time. I was currently running the IOS 6.0.1 on my iphone 4 and I could sync and transfer music to my phone via my iTunes account. But I updated my phone to the new IOS 6.1 and now I can not transfer music onto my iphone, all it does is tries to sync the songs but it doesn't. I have uninstalled and reinstalled iTunes back onto my laptop yet it still does not work. Can anyone please help me.
Everything is Sorted!
The release of iTunes 11.0.2 and iOS 6.1.2 for my iPhone 4, seems to have sorted everything. I can now sync music, films and photos between my MacBook and my phone.
I was dubious about blindly doing the updates but decided they couldn't really mess up any further functionality so I went for it and it's sorted now.
Look in to, and take the gamble, it's up to you. -
(0xE800000A) my itunes account will now not connect to my iPhone, what has happened?
I updated via my laptop and always kept the latest version on there.
I may delete my iTunes and then re-install just to make sure it is the most up to date version but I am 99% sure it is.
The update for my phone has worked...it is running off the iOS6.0.1 but just without all my old data (as I didnt back it to iCloud but iTunes instead).
Also, as of about 10 minutes ago my iTunes isn't functioning properly.
Will see if re-installing iTunes helps or not, seems like my files are gone for good though.
I am getting the iPhone 5 next week, hence my last minute rush to update all software...seems to have backfired somewhat! -
Like my header says.. I have a I Phone 4S.. with recently installed OS 7 software.. One problem has occured.. when someone calls me thier phone rings
3 to 4 times before my phone rings.. I have tested this with several family and friends calling me..
> I have a business this is unacceptable.. does anyone have a solution thanks...If this were happening to me I would try resetting the System Management Controller. Next step would be to take it to an authorized service place.
-
This app was great, now it is simply not very flexible.
Hi, Dave.
If you're using the BlackBerry browser, you can't configure anything to bypass the RIM servers. I believe you may do so by using the Opera browser, but I haven't tried it myself so cannot comment with authority.
I hope that clears up the issue for you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
My ipad mini is not being recognized by the new iTunes update that just came out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini
I found this is another thread - same issue.
Re: iTunes has stopped working. Why?
Sep 11, 2013 6:07 AM (in response to thurdy)
Resolved!
After contacting Apple, I received a reply from their engineers:
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
And that did the trick.
Message was edited by: Stryder777 -
Hi, I have been watching videos from my ipad via ATV2 with no problems for over a year. As of yesterday my videos just keep loading and don't play. I don't think I have done anything differently. Does anyone know how to fix this. I have tried unplugging it waiting 30secs and then plugging it back in. I have tried restarting, updating and reseting but nothing is working. It's quite frustrating!!!! Any suggestions????
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
Every time i try to do anything with itunes it freezes after a few seconds and i have to force it to close. Does anyone know how to fix this problem? Im aweful with computers and have tried everything i know of.
Hey newyearnorma,
Thanks for using Apple Support Communities.
It sounds like iTunes has been freezing on you, take a look at this article to troubleshoot.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Have a nice day,
Mario
Maybe you are looking for
-
Missing namespace prefix in the soap body
Hello The soap body that is produced along with soap header for my webservice. I am the client talking to a server. The first piece in RED color is what weblogic generates to send to the client but does NOT work. The one below though works fine which
-
PowerDVD to view Blu Ray discs on WinXP or Win7 under Bootcamp
Trying to get a solution for playing BR discs on my MacBook Pro (with USB attached Pioneer BD Burner/Player). It would appear that Bootcamp is the way forward, but due to the way in which my partitions are set up, this will be a bit of a pain... So b
-
OK, where did you hide the duplicate document function? Or did you NOT add that basic feature in Draw either? The fact I cannot simply figure it out in your app if it is there means your UI is not intuitive. And if it's not in the app what the hell w
-
Package Transfer to DP restarts after failure SCCM 2012R2
In a remote site we have setup a DP. Now I am trying to distribute a large package (10GB) over the line which is 300KB/Sec So it takes a while. The connection to the remote site failes from time to time and what I see in: Component Status: SMS_PACKAG
-
How do i change Session Expire Time in APEX?
Greetings, I am developing in APEX 3.2. Every few minutes while i am developing i have to log in again, it gets tiresome every day having to login 100 times. So i would like to know where i can change the time it takes for the session to expire so i