I have just upgraded my i-mac to snow leopard
2 days ago i upgraded my i-mac with the snow leopard disc and it is slower than before and keeps freezing...any suggestions.
thank you
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.20f4
Serial Number (system): W8******X85
Hardware UUID: 00000000-0000-1000-8000-001B639D6B1C
Thank you so much for your help
<Edited By Host>
Similar Messages
-
My imac is currently running mac os x 10.5.8. I've tried to install mac osx snow leopard 10.6.3, but have been unsuccesful because the disc fails to install.
What could be the problem?noondaywitch wrote:
You should boot from the Installer DVD by holding down the C key during start up until the Apple logo and spinning cog wheel appears. Allow plenty of time for the installer to appear - it can take several minutes when booting from a disc.
I suggest not doing this unless the Apple recommended method (starting by double-clicking on the
Install Mac OS X icon while booted up normally) fails.
There are several reasons for this:
The Apple method performs a check of the DVD's integrity before starting up from it. This can't be done if you start up directly from the DVD.
The Apple method "phones home" using the current OS's network settings to check for updates to the incompatible items database included on the DVD & writes a lot of pre-install data (the 'Mac OS X Install Data' stuff) to the HD before restarting automatically from the DVD to finish the installation. This may not work as expected if you start up directly from the DVD.
The pre-install data on the HD speeds up the installation process (because running the OS from the HD to build the data is faster than doing that while running from a DVD).
The Apple method makes it possible to "gracefully" cancel the installation before the automatic restart occurs without leaving the existing OS on the HD in a corrupted, "half-installed" state unable to restart the Mac. This sometimes happens if the installation process hangs & one has to force-restart the Mac to recover. As long as this occurs during the "pre-install phase" before the restart, the existing OS should remain untouched & intact.
Also note that the Snow Leopard installer is quite a bit more sophisticated than the previous ones like for Leopard or Tiger. It automatically performs the equivalent of Disk Utility's Verify Disk step before beginning the installation & performs more checks during the installation process (including checking the pre-install data for errors). It is usually not necessary to remove the "Mac OS X Install Data" folder after a failed installation, which may just cause the process to take longer on subsequent attempts, but if nothing else helps it is certainly something worth trying. -
I had been thinking about upgrading my macbook pro from snow leopard to mountain lion for months now and I finally decided to do it. I had already backed everything up and done everything to make sure I don't lose anything. The upgrade finished and I restarted my mac, it has been stuck on the start up screen. What can I do?
If it's truely stuck, force quit the machine by holding the power button. Then power back up. Do this only if you're confident in your backup.
-
I have just up graded my i mac to Mountain Lion and now cannot open my e mails in entourage or my word documents. What do I do to get them back?
It looks like you have Office 2004, which doesn't run on Mountain Lion. Upgrade to Office 2008 or 2011.
-
my mac will not open iphoto with my photos. the app opens and the circle just keeps spinning. I have tried reinstalling the ilife , i have tried holding the command and option keys and fixing it that way , nothing works.
Have you downloaded iPhoto 11.0.1? You migh also get more info posting this on the iPhoto forum. Best of luck.
-
I get the message that the plug-in was blocked. Do I need to upgrade something else?
Check System Preferences->Flash Player and check the settings and the installed version. 12.0.0.38 is the latest.
-
Need to download app store but can't find
App Store is in your Applications folder and there should also be an icon in the Dock.
-
I have Adobe Photoshop CS4 and have just upgraded my Mac operating system to Yosemite with the newest version of Java 2014 running. When I try to access Photoshop from Bridge or directly open it asks for a Legacy Version of Java 6. As I am a pensioner I cannot afford an upgrade does anyone know of a work-around for this problem?
Hi Daddyfred,
CS4 Photoshop has not been tested on Yosemite. But still you can try the Java 6 update using the below link.
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
Thank you for posting on Adobe Forums. -
I have a MBP 13-inch, Mid 2010 and have just upgraded to mountain lion and am trying to connect it to my apple tv however i dont get the air play icon on my mac i have followed all the advise on support anyone able to help??
stevie, a third party app called airparrot will give you the pretty much the same as mirroring and forks on Macs too old to mirror.
-
I have just upgraded to an Iphone 5 and cant get my contacts to sync. My 4s Contacts default account was from my Mac - but I dont seem to ahve this option on my 5? How do I sync them?
The way I do it is I hook to my windows computer, it will pop up iTunes. I click iTunes off. The phone will show as another drive on your computer. Click it open then migrate to the photos folder from the iPhone.
Then select all, cut then right click on your pictures folder on your computer or make a new folder on your desk top like I do and right click on new folder and select paste.
Photos will be gone. Just remember to turn off the iPhone sync in your photos folder on the phone or they will come back
Good Luck -
i have just bought my first mac and have been told in pc world that i can get a free upgrade to lion, but it would appear that this is only for those in the u.s. and canada. is this true? also from reading the discussions it seems that lion is not a good thing. i am already regretting my decision to go to a mac.
I have found that both Linux and Mac (unix) are capable of reading "deep" folders while win 32 will have issues, your it people are clearly wrong. I run a network with both win/mac. And as long as the win servers/pc's that have shares are set to allow apple file sharing in their folder properties. And the macs are set to allow smb there should absolutely no trouble with you accessing anything across the platforms, heck, from a Mac to a win pc on some occasions you don't even need to include a "domain" name to log on to, and you can create aliases and make your own shortcuts etc... So you don't have to manually connect each time you boot up etc... But that's all personal preferences I suppose.
All I can tell you is that, I do it on a daily basis managing a small business. So your answer is yes you can. -
Just installed mac osx snow leopard upgade and connected my printer too, and realized I have lost sound! Can anyone help?
In case I misunderstood, did you mean that the 10.6.3 version of Snow Leopard was the upgrade? If so you need to update via 10.6.6 to 10.6.8. These updates can correct minor system upsets.
And ... did you also repair permissions both before and after you upgraded. You should do this when you progress via 10.6.6 to 10.6.8 too. -
I have just upgraded to Mac OS X Lion and I am now unable to watch .avi files.
I have just upgraded to Mac OS X Lion and I am now unable to watch .avi files. Required codec not available is the message I get. I have run a software update and still nothing. HELP PLEASE!!
hey,
try downloading VLC player, it plays mostly everything.... literally everything...
cheers -
Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears:
"The licensing of the product does not work"
Fault 6
How should I proceed?
Have the program installed on only one computer.Download the Adobe Licensing Repair Tool.
Run the License Service Update.
Mac OS X 10.7 and above:
a. Double-click the LicenseRecovery111.dmg It will extract the folder. Open the folder.
b. Double-click your Hard Drive.
c. Double-click Applications.
d. Double-click Utilities.
e. Double-click Terminal.
f. Type sudo python
Note: There is a space following “python”. Do not press Return.
g. Drag LicenseRecover.py from the LicenseRecovery111 folder onto the Terminal Window and press Return.
It should look like this:
h. Enter your administrator user name and password when prompted and click OK.
(Note: the cursor will not move and you will not see stars or dots, just enter your password anyway.
i. Let the script run, it will tell you when it is finished. Quit terminal and restart Photoshop
Gene -
I currently use CS Photoshop 5.1 on Mac. I have just upgraded to Yosemite 10.1.0. In order to run CS Photoshop 5.1 I need to downgrade to Java 6. Is this safe, or will I become exposed to security risks?
Photoshop does not use any external java it has it own "ScriptingSupport" plug-in, Some thitd Party plug-in and perhaps Adobe installer may use an external Java. I don't use a Mac, The latest Java I have on Windows is version 8 there are security issues in prior versions.
Maybe you are looking for
-
[solved]arch mythfrontend does not fully work, mythbuntu works perfect
Hi All, I have a PC running mythbackend and frontend. I call this PC "server" I have a second PC, with only mythfrontend. I call this PC "Laptop" Mythfrontend on the server works fine, all recordings are visible under "media library->watch recordings
-
Missing Role Grants after datapump
Hello OTN-Community, I have a problem with datapump. I am using some include filters to get the relevant data exported. One of these filters inlcudes the ROLES of my database which starts with a certain expression. After the export into another datab
-
Moving, aligning, and distributing objects
This question was posted in response to the following article: http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-62f2a .html
-
Oracle applications in reg to reports
Hi The Issues it was like this when Concurrent Request Successfull Completed Without any errors But output File is not Generated in Oracle Apps 11.5.9 Environment. When we checked in log file it showing Error Like this FRM-41839:Disk I/I error on Tem
-
Ical won't install on my computer
I'm thinking my computer is too old for ical. I have an old imac and tried to install ical on it and it says that it can't be installed on this computer. It's an old imac that's an extra computer that I use. I'm running 10.4.11. All my other macs are