I have just upgraded my itunes to 11.1 and now my iphone is not being recognized

Hello, I have itunes 11.1 installed on my PC, with windows 8, just upgraded today and now my iphone is not being recognized. Am I doing anything wrong? What can be done? I've seen that lots of people have the same issue using a MAC computer but I am using a laptop PC with Windows 8.... please help!!! Thanks...

most likely you will have to reinstall itunes but try the step before in the article http://support.apple.com/kb/ts1538

Similar Messages

  • I just upgraded to iTunes 10.6.1 and now my library is not loaded, how do I get it back?

    I upgraded to iTunes 10.6.1 overnight and when I start it now
    there is no media loaded, no songs, no films and no TV Shows.
    I have tried starting using the shift key to point iTunes back to my library location,
    but still no luck.
    Has anyone got any ideas??

    warren.b.paul wrote:
    So, I have managed to fix the problem.
    I found that the upgrade had replaced my library files with empty ones.
    So I restored the backup I made of them before the upgrade and
    now all my media is back.
    Great..
    For those who run across this therad and haven't taken the effort to make a backup here is another approach that should work.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

    I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

    Is this what you downloaded: iTunes 10.7?
    When the update fails what if any error report do you get, specifically? Please do this before trying again:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • I have just upgraded to iTunes 11.0.5 and it won't recognize my devices

    I have upgraded to iTunes 11.0.5 and now iTunes won't even recognize my devices so I can't sync my apps, etc.

    Hi Parraga,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Judy

  • HT201365 I have just upgraded to ios7, entered a passcode and now the ipad has been disabled because I must have entered the wrong passcode, what can I do to re-enable my ipad?

    I have just upgraded my ipad to ios7 and entered a passcode.  When I switched on again I must have mistaken the numbers I used and my ipad is now disabled.  What can I do?

    You'll have to restore it to remove the passcode.  See http://support.apple.com/kb/HT1212.

  • I just had to change my Google password and now my email is not being received on my Iphone 5s --help!!

    I just had to change my Google password and now I am not receiving email on my Iphone 5s--all updates current
    What do I do????

    Did you update your password on your phone?
    ~Lyssa

  • Help! I just upgraded my desktop to Windows 8 and now my iPhone 4 won't sync!

    Hello, all!
    I just upgraded my desktop computer to Windows 8 (love it!), but now my iPhone won't sync. I am stumped...even a friend who's an amazing computer tech doesn't know what to do.
    Any advice would be greatly appreciated!
    Happy Thanksgiving!
    Janie:)

    1) Uninstall iTunes, de-authorize your computer first...read here:
    http://support.apple.com/kb/HT1923
    2) Then download the latest iTunes installer from apple.
    3) Save installer to your downloads folder.
    4) Right click on installer and run as administrator...important you do this.
    5) Run the install as normal
    6) Open and authorize your computer in itunes.

  • I just recently added itunes to another pc and now my ipad will not sync on the new pc. It isnt even recognized. What should I do? HELP!!!

    I just recently downloaded the newest iTunes and moved all my purchased and already owned music to another PC. Every since I did that I cannot get my iPad 1 to even be recognized in iTunes. I have Authorized the PC in iTunes, but my iPad still will not allow me to sync. I'm at a loss...PLEASE HELP!!!

    1.  You need to authorize iTunes on the new computer with your Apple ID.
    2.  Make sure you turn off auto sync in iTunes
    3.  Connect your iPad to iTunes via USB and when it is recognized, right click on the device from the Device list on the left of your iTunes page and choose transfer purchases.
    4.  Once purchases are transfered and you have authorized the iTunes account, you should be able to sync.

  • I just updated my itune on my PC and now it doesn't start.  There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data?\

    I just updated my itune on my PC and now it doesn't start.  There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data?  How can I fix the problem? Thanks

    Try this from MacFixIt as well:
    In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
    * Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
    * Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

  • I recently upgraded to iOS 7.0.3 and now my iPhone 4S will only sync purchased music to my phone from iTunes. Help! I have TONS of music that I have bought and burned to my computer, but cannot listen to it on my iPhone. This seems ridiculous!

    I recently upgraded to iOS 7.0.3 and now my iPhone 4S will only sync purchased music to my phone from iTunes. Help! I have TONS of music that I have bought and burned to my computer, but cannot listen to it on my iPhone. This seems ridiculous!

    Also, it's taking FOREVER (over an hour) to sync my iPhone to iTunes...

  • I have just upgraded my Ipad to IOS 5 and I am unable to use my applications

    I have just upgraded my Ipad to IOS 5 and I am unable to use my applications.
    The applications appear in the screen, but when I tap on any one of them, they do not open.
    Can some one tell me what to do to be able to use my application again?

    Sorry, I'm reposting this because of spelling error in my previous post (I must turn that 'auto-correct' off).
    Since I posted my questions, the only thing I figured out was to turn the 'iCloud' in the Settings on and now the plus sign is on and all my previous appointments appeared.  While this is a solution, what if I don't want to use iCloud? But I'm happy for now that my Calendar works.

  • I have just upgraded to Mac OS X Lion and I am now unable to watch .avi files.

    I have just upgraded to Mac OS X Lion and I am now unable to watch .avi files. Required codec not available is the message I get. I have run a software update and still nothing. HELP PLEASE!!

    hey,
    try downloading VLC player, it plays mostly everything.... literally everything...
    cheers

  • TS1363 Just upgraded to iTunes 11.1.4.62 now my device (iPhone5) won't sync but shows up under Windows Explorer.

    Just upgraded to iTunes 11.1.4.62 now my device (iPhone5) won't sync but shows up under Windows Explorer. When I plug the phone in it asks if I want to trust the computer. I say yes but it hasn't asked me that since the very first time I received the phone.

    This resolved my issue.
      Thank you for the suggestion. This worked for me. No more trust this computer messages and itunes now recognizes my ios7 iphone.
    Reinstalling the usb driver in win7 by going to device mgr/ portable devices and then directing the computer to search the apple folder ...
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. did the trick.

  • I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
    It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

  • Upgraded to iTunes 8.1.1 and now iTunes does not recognize iPod

    I recently upgraded to iTunes 8.1.1 and now iTunes does not recognize iPod. The iPod says "Do Not Disconnect" but the device is not listed in iTunes so it will not sync.

    Hey, we are having exactly the same problem! My old ipod died a slow death so I bought a new nano 16gb 4th gen and I can't use it as itunes isn't recognising any ipod being plugged into it. I've been through the whole support database and every USB port is working on the laptop, so I know the computer is recognising its there its just itunes itself - even removed and downloaded it again but no change! If anybody has any ideas what is going on please let me know!!!!

Maybe you are looking for

  • Could not complete the Render Video command because of a problem with Adobe Media Encoder.

    So initially, my problem was solved, but it stopped working again.  Same issue.  I tried installing the media encoder app, but no luck please help! Here's the original post: Hello, I'm running a macbook pro retina, and previously I was able to render

  • How do I enable "auto-capitalization" on Pages 5.2?

    I'm still used to Microsoft Word which would capitalize for me, at the beginnings of sentences, proper nouns, etc. Pages must have have it, right?

  • How to add a rectangle color frame for the video clips ?

    Hi there, I have shrink the 3 video clips small enough to fit all 3 of them into 1 screen. And now I want tomake a border rectangle color frame for these 3 video clips. Any tips on how I shall start ? Thanks & regards Cheers

  • Background image not displaying

    I'm developing pages that will each have a different background image. i've defined a div with the bg image in it and put that div in the code, but the bg image doesn't show up. i've also tried adding a bg color to the div and that doesn't show up ei

  • JBoss Portal integrating with SAP R3 RFC

    Hi Experts,                   I have developed one application by using SAP NetWeaver Webdynpro Java in which i am fetching some values from RFC i developed that application and deployed in SAP Eneterprise portal its working fine.                  No