I have just upgraded to a iphone c and back up all my data via the cloud but I cannot get my emails or contacts
I have just upgraded to a iphone c and back up all my data via the cloud but I cannot get my emails or contacts is there somethimg i'm not doing right?
Is your email account set up under Settings > Mail, contacts, calendars?
Similar Messages
-
I have just upgraded to an Iphone 5 and cant get my contacts to sync. My 4s Contacts default account was from my Mac - but I dont seem to ahve this option on my 5? How do I sync them?
The way I do it is I hook to my windows computer, it will pop up iTunes. I click iTunes off. The phone will show as another drive on your computer. Click it open then migrate to the photos folder from the iPhone.
Then select all, cut then right click on your pictures folder on your computer or make a new folder on your desk top like I do and right click on new folder and select paste.
Photos will be gone. Just remember to turn off the iPhone sync in your photos folder on the phone or they will come back
Good Luck -
I have just upgraded to an Iphone 5c, and now i cant send imessages to my partners Iphone 4.
Then when it times out to send as a text message he isnt recieving them and vice versa.
We have tried turning off and on, rebooting and reseting network settings and nothing works?Call Sprint back and ask to speak to a supervisor.
-
I have just upgraded to an iphone 4s and whenever I receive a message ,notification or the alarm goes off the camera flash goes of as well. Does anyone know how to disable this. No one else I know with this phone has this happen
Settings>General>Accessibility>Hearing>LED Flash for Alerts>On/Off.
-
i have just upgraded from an iPhone 3Gs to an iPhone 5. I am trying to transfer all my content via icloud but having problems logging in - it keeps telling me the server is not responding. Nano sim hasn't yet been registered - does this affect things?
Have you activated your phone with your carrier yet?
-
please help! i have just upgraded to an iphone 5 for work, so i have started to backup my iphone 4 but it is stuck on 'finishing sync' and has been for 20hours!what can i do?i need it for work tomorrow
Is this what you downloaded: iTunes 10.7?
When the update fails what if any error report do you get, specifically? Please do this before trying again:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
I have just upgraded my iPad to ios6 and iTunes is now in Spanish - I am on holiday in Spain. I have also updated my iPhone but iTunes is still in English, can anybody help me get English back on my iPad
I had the exact same issue with mine. But I'm in Mexico. It was forcing me to use iTunes in Spanish even though my account is in the US. I turned my iPad off, then on again, and presto! My iTunes is back into English and my account is recognized again.
-
I have just upgrade my Ipad3 to IO6 and for some reason the youtube app just gone disappeared. Please help!!
The YouTube app is not included in iOS 6. You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google, and other people have said that they are working on an iPad version), or try accessing the mobile version via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)
-
I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.
I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac
-
I have just received a new iphone 5s and need to set the Apple ID with my work email. I used my work email on my personal iphone 4s to set up an icloud account and it will not let me use this email as the Apple ID on my new iphone. As it is a work phone I need to use this email address as my Apple ID. How do I do this?
when you open the app store scroll down to the bottom it will display the apple id currently in use, change it to your normal apple id email
-
I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?
Hi Cjroyle,
Thank you for using Apple Support Communities.
From your post I understand that your iPhone will not boot past the Apple logo on the screen. To troubleshoot this issue I'd like you to please follow the steps in the article below.
iOS: Not responding or does not turn on
Take care,
Alex H. -
I have just received a new iPhone 4s and have restored it from the last back up I did before I got the new phone, however, after I do the restore the only option I get is to click on "Done" at the top of the page but then no data or information from my phone shows up and when I click on the "iPhone" button on the top right hand side of the page it takes me back to the previous page and gives me the option to set up a new phone or restore again. I have just restored my husbands iPhone 5 and had no issues at all. They were both backed up on the same day last week.
That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.
-
I have just upgraded to 10.6.7, and was browing the App. Store, I selected a product by mistake and it started to download, I cancelled the download, but it still registers in my purchases list, have I purchased that appl.? and how can I cancel the purchase in my purchases list?
I think that as soon as you click "Buy" and type in your details, the iTunes server is alerted that you have bought the item, even if it hasn't downloaded. Your "purchased" list is based on your account and not your computer so I'm afraid even if you haven't completed the download, you will be charged for it (but if you do now download it, you won't be charged again). This also means that you can't remove items from the purchased list.
Glad to be of help (I hope),
Jonathan -
I just upgraded to an iPhone 5S and it is going haywire whenever I use it. It will randomly open applications, send emails suddenly before I am finished writing them, and much more. Is there a way to resolve this without returning the phone?
Hi, jbgatch.
Thank you for visiting Apple Support Communities.
Our iOS devices use a capacitive touch screen and with it being winter in most places, a buildup of static electricity can cause the touch screen to act erratic. Start with closing all applications open in multitasking and power cycling the device. If using a screen protector, remove it and test without it installed. Some cases that include a screen protector can cause this issue as well. Try the remainder of the steps in the attached article below. If the issue persists, a restore as new may been needed. Make sure to backup your data prior to a restore.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Cheers,
Jason H. -
I have just recently bought an iphone 4s and the tchs in the shop transferred all my contacts from my Samsung galaxy mini to my iphone for me bought they could not transfer my photos or my small amount of music.How do I do this?
Given that I am a complete novice,some straight forward and simple advice would be helpful folks.Get the Samsung Kies application to transfer it onto your computer, and then use iTunes to add it to your iPhone.
Maybe you are looking for
-
To get the values from func. module
c i have used a func. module to calculate the values of date , i wrote a subroutine i want the values of this to be dispalyed on the list... now how do i get them to the list output, i mean how do i assign to the fieldcatalog????? thanks, CAPC
-
Hello, I was wondering if someone could help me with a really weird problem. I have a form I created that hides and shows a lot of different fields it also has some add and remove buttons. This all works great until the user hits the send email. When
-
Hi, All, Can a stored procedure be used as a function in a SQL? I knew procedure can return more than one values but function can only return one. I know how to use a function in a SQL, but dont how to use a procedure in SQL (please give an example)
-
Best way to manage large library with AAC and MP3 versions of files
I have a large library of music. I listen to music through iTunes and iPod/iPhones, but also other devices which only support MP3, and not AAC. I typically convert iTunes purchases to MP3, but I'm left with two copies of each song in the same folder.
-
Hello Everyone, I am facing extreme problems in configuring NWDI for my landscapes.. Please guide me how excatly the config. takes place in the server and as well in developer studio i.e., if i develop a local DC how can i do the Check-in..what depl