I have just upgraded to PSE 12 and Premier E 12, and tried to installed many times. The pop up says "Configuration Error"; contact Adobe Tech Support(?); and "mention error code 1"! Help please!
I have just upgraded to PSE 12 and Premier E 12, and tried to installed many times. The pop up says "Configuration Error"; contact Adobe Tech Support(?); and "mention error code 1"! Help please!
Install appeared to run okay up to,, and including "shared Technologies"....
Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
Similar Messages
-
I just migrated from one Mac to another and I got a msg to contact Adobe tech support and report error code 150:30. What do I do?@
Reinstall the software properly. Migration is useless due to the specifics of the activation system.
Mylenium -
i forgot my passcode for my ipod and ive tried it so many times that now it tells me ipod is disabled connect to itunes and i dont see anything that talks about the passcode
Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities
-
I have downloaded a book purchased from ebooks and I cannot get it transferred onto my nook. get a message saying "ce - copy not allowed. No permission to copy book. Help please.
I have the same problem
-
Hello everyone,
I just updated my 3GS from iOS 5.0.0 to 5.0.1
Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.You do not need to keep posting the same thing over and over again.
Look to the right side of this page at "more Like this" or do a forum search. -
I have just upgraded to PSE 12. I cannot view photos in the Organiser how do I make them appear?
I can see the hourglass only. Eventually and for no logical reason they do appear but may disappear just as quickly. In PSE 9 I would just click on 'show all'. How do I do it in PSE 12?
Have you given PSE enough time to generate all the thumbnails? It can take a very long time if you have a big catalog. If you're sure that's not it, try selecting a thumbnail and pressing F5. If it generates an image, then select all and do the same thing.
-
I have a first gen MacBook pro with intel chip. All of a sudden when I try to start up instead of the apple logo I see a file folder with a question mark. Phone support wasn't much help since it is a older machine. It's either a software issue or the hard drive went. Any ideas on how to fix if it's a software issue would be appreciated. Thanks a lot.
Thanks I tried that and when I click repair it tells me
Invalid volume header
Checking hfs plus volume.
Invalid b-free node size
Volume check failed
Error: the underlying task reported faliure on exit.
1 hfs volume checked
1 volume could not be repaired because of an error. -
After installing ios 6 i lost all my data from iphone 3gs. now i hav ios 4.1 os and it doest support any application like watsapp viber and etc to install. can anyone guide me what can i do ?
After installing ios 6 i lost all my data from iphone 3gs. now i hav ios 4.1 os and it doest support any application like watsapp viber and etc to install. can anyone guide me what can i do ?
-
When I got my new computer and transferred I tunes my songs in my play list play on my computer, but when I try to sync to my 3g Ipod, it only syncs a few albums and gives me a message that 100 song files can't be found. So only half of what I want is on my Ipod. I leave on a long trip now and really need the Ipod full of my music. I've tried reloading some CDs and replacing the old ones on there, but still they won't sync. What do I do?
You need to copy everything from the old computer or your backup copy of your old computer to the new one.
The iphone will sync itunes content and pics with one and only one computer at a time. If you sync to another, then it will erase the current content from the iphone and replace with content from the new computer.
The music sync is one - way -computer to iphone. The only exception is itunes purchases. Without syncing: File>Transfer Purchases
If you sync contacts and calendars to a blank computer, then they will be erased as well.
Copy everything from the old computer. -
Apple Tech Support and the Publish Fiasco
This publishing issue has been something I have fought with from the moment that iWeb was released. It recurs every few weeks, and either resolves its self, or in the most extreme case the last time this ocurred, I had to delete my entire site from my iDisk manually, and spend 10 hours, and repeated attempts republishing.
I had contacted Apple Tech support, and gotten no satisfaction. They escalated the call some weeks ago. I was supposed to hear from an engineer and never did. That is what prompted me to go the extreme route of actually deleting my entire 860 MByte site and starting over.
I installed the iWeb update this morning, thinking that this problem would be solved. It was not. Looking around on this discussion board, I see an awful lot of similar comments. This has made me all the angrier since this is an issue that has been there since day 1, and not been resolved.
I very angrily called Apple technical support, and because I had reported this case multiple times in the past, I was escalated to a higher level support. I have been on the phone with Apple for the past two hours. The engineer ended up taking an extensive report from me. We tried several of the recommended procedures: check privileges on .mac, alter .mac allocation sizes, delete the assets.plist in the domain file, etc. to no avail. Finally stumped, the engineer sent me a program to actually capture a bunch of logs from my machine, as well as a network traceroute, in an effort to see what is going on network-wise in communicating with .Mac servers. He has promised to get back to me later in the week.
I STRONGLY recommend that everyone having issues with this get on the horn to Apple tech support, and immediately demand that the issue be escalated to the higher-level support engineers, especially if you have already attempted the various solutions offered here. If they are bombarded with support calls and people offering to dump logs and send to them, they will resolve this issue sooner than later (hopefully).
Message was edited by: SkipHaughay For: SpellingI have some information you can pass on to Apple Tech support, if you ever contact them again.
iWeb 1.0, from what I have heard, generally connected just fine, but 1.1 and 1.1.1 did not for many people, myself included.
My own publishing problem turns out to have been because I run a Squid Caching Proxy in my basement. I was fortunate enough to discover why iWeb stopped publishing. My experience is documented here: http://www.untergeek.com/?p=675
Having perused many of the "publishing error" -type posts in this forum, I can tell you that many have discovered that they are able to upload via dial-up or from another site via a different ISP. This leads me to believe that some ISPs block these new HTTP methods, causing iWeb publishing to fail. (The HTTP methods are ACL and DMMKPATH).
So the short version is that iWeb isn't at fault, per se, but rather that the disconnect is between the new HTTP methods and some ISPs performing some sort of filtering. I imagine that Apple's developers had no idea that these new methods could or would be filtered in this fashion.
Perhaps when they find out that this is occurring, they'll make a non-filtered work-around. -
I just bought this and was trying to load it for the first time and the circular icon just keeps flashing like it is trying to load and can't. Most elements come up but I am wondering why it is still flashing like it is trying to load.
At times, the drop down menus will not stay up. When I click on them, they flash and then disappear.
This is not a blank message.Not the help you're looking for -- sorry -- but I'm fighting a battle with Adobe tech support, too. They won't help me with an issue involving using the program, but their site seems to indicate that tech support is available for download, install, & setup. Check page: https://helpx.adobe.com/contact/what-contact-options.html and try calling them again. Good luck!
-
please help! i have just upgraded to an iphone 5 for work, so i have started to backup my iphone 4 but it is stuck on 'finishing sync' and has been for 20hours!what can i do?i need it for work tomorrow
Is this what you downloaded: iTunes 10.7?
When the update fails what if any error report do you get, specifically? Please do this before trying again:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
I have just upgrade my Ipad3 to IO6 and for some reason the youtube app just gone disappeared. Please help!!
The YouTube app is not included in iOS 6. You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google, and other people have said that they are working on an iPad version), or try accessing the mobile version via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)
-
hi, i have just upgraded to the i phone 5 from the 4s, i have done a back up and transfrerred all content to my i phone 5 but cannot get apps to transfer how do you do this please?
Apps are not part of the backup. You need to sync them to the iPhone from iTunes on your computer or re-download them from the iTunes Store. For the latter option, see:
http://support.apple.com/kb/ht2519
Regards. -
I have just upgraded to Yosemite, and when trying to update Pages, get the message incompatible update!
If you are using track pad, please use mouse and see if your issue is resolved.
Moreover, this issue has been resolved in PSE 13. You can give it atry as well.
Thanks!!
Maybe you are looking for
-
LogonServer Message with XML Datasource
Afternoon all. I'm making a ODBC connection to an XML file using a CR ODCB XML 5.3 driver (crdb_odbc.dll). The process (which is being run from a handheld scanner) is basically this: create an XML file with the data I want to see on my report, progr
-
Problem with ejb 3.0 entity beans with manyToMany relationship
Hello everyone! I am using struts 1.2.9 and java ee 5 sdk update 2 for my enterprise application. Besides others i have these entity beans Targetgroup.java and City.java, (i would upload file but i do not know how:) with manytomany relationship with
-
IS-Retail Allocation: Allocation Table with reference to Purchase Order
Hi All, I have created a allocation rule, in which i have defined the quota for two sites 30:70. i.e. when the STO will be made for 100 planned qty. 30:70 will get distributed. Now i want to create a allocation table against a purchase order. In WA01
-
Hi everybody I have the following error in my JDBC to JDBC scenario; I configured the JDBC sender adapter and receive the following message back. In the Configuration I set Document Name to MT_ScanningStatus: <?xml version="1.0" encoding="utf-8"
-
Help opening windows livecycle file in adobe x pro for mac?!
i have a .tds file that was created in livecycle designer on a windows platform that i would like to edit. However I am now using a mac and have adobe pro X... help???!!