I have just upgraded to windows 10 and now I can't play movie ft u

After installing win 10 my USB lfxhcl host controller gone. Can't play movies or listen to music. All was working in 8.1 help.

Check the tutorial please: https://www.youtube.com/watch?v=jWoIYi1LTPA

Similar Messages

  • I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

    I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

    Hi, stig2013. 
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Cheers,
    Jason H. 

  • HT2513 I have just upgraded to the icloud and now I am getting an error message on ical - saying "make sure the URL is correct", I haven't changed anything so why is it now an issue? any ideas?

    I have just upgraded to the icloud and now I am getting an error message on ical - saying "make sure the URL is correct", I haven't changed anything so why is it now an issue? any ideas? 
    The full message sasy "The calendar https:// cal.me.com:8443/principas/users/(server number) was not found on the server.  Make sure the URL is correct.

    10.6.8 cannot access iCloud's facilities - you can set Mail up manually and there is a hack which some people have used to sync calendars (see below) - you cannot sync any other type of data.
    This is the situation with iCloud and Snow Leopard:
    Your email, calendars, and 'Find my iPhone' will be migrated to iCloud. Contacts and Bookmarks cannot be migrated from a Snow Leopard Mac.
    Your iDisk, together with website hosting and Gallery, will continue to work as before until next June.
    Syncing of Dashboard Widgets, Dock Items and Keychains between Macs, and Mail Accounts, Mail Rules, System Preferences, Signatures & Smart Mailboxes between Macs & iOS devices, will cease altogether.
    You will be able to access email and calendars on the iCloud website at http://icloud.com provided your browser is reasonably up-to-date.
    You will not be able to sync contacts or bookmarks from a pre-Lion Mac.
    You will be able to enter the server settings for email manually in the Mail application and access your email.
    You will not be able to sync your calendars directly.
    Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point.  BusyCal is an iCal-like calendar application with extra facilities: it can sync with the iCloud Calendar while running on Leopard, Snow Leopard or Lion.
    There appears to be no method of syncing contacts (though Address Book on a Mac can be synced with Google or Yahoo address books - I don't know how reliable this is).

  • I just upgraded my apple TV and now when I rent a movie on iTunes, instead of it playing instantly, it takes 60 hours to load. Anyone else have this problem?

    i just upgraded my apple TV and now when I rent a movie on iTunes, instead of it playing instantly, it takes 60 hours to load. Anyone else have this problem?

    Apple Support, I have just purchased 3 movies 2 from my account and 1 from my wifes account and both systems are stating that it will take 2 days to download.  I have a FIOS 150 megabit per second up and 150 megabit per second down busiuness class fiber service to my location.  I have tested downloading 10Gbyte files from two other locations and both work fine.  I additionally went out and have tested doing speed tests (http://www.speedtest.net/) from over 10 other locations all over the US and all are over 75 magabits per second download speeds with a few hitting 100 and 125 megabit per second speeds.  What is wrong with your servers or your internet connection????
    This is VERY FUSTRATING!!!
    I have additionally tried to download them with my Apple TV and two different PCs all wired on Gigabit Ethernet with jumbo frames enabled.  I have tried differnet DNS servers also.  I can upload and download files to my office 50G in less than 1 hour.  I have also download movies from 2 other movie sites without any problems.

  • I have existing projects made in iMovie and now I can't play them or edit them... any idea what's going on? Thank you

    I have existing projects made in iMovie and now I can't play them or edit them... any idea what's going on? P/s M preview window is totally blank.  I can't figure out what went wrong. Thank you

    For iMovie to see your projects, they must be in a certain place. If they are on your startup internal hard drive, they must be in the Movies/iMovie Projects/ folder. If they are on an external drive, they must be in the iMovie Projects/ folder at the top level of the drive. Is it possible that your projects have been moves somewhere else?

  • I updated my computer and now I can't play mov files from anywhere

    I updated my computer and now I can't play mov files from anywhere - won't play in FCP 7, Quicktime. Not sure what updates they were specifically since i hit the "update All" button without going over each one. Please help!! operating on 10.6.8 with FCP7

    Just take a look at the last few days posts here and you'll see many people with the same problem and some possible solutions.
    But you should never do any software updates unless you have a bootable backup of your startup drive.  FCP7 is no longer being supported by apple and updating anything is fraught with dangers. 

  • First post for me I have just updated ipad to ios8 and now I can't sync music from my Mac to it witch is running latest itunes it starts to sync then stops straight away with no info why as anyone got any ideas please?

    First post I have just updated iPad to latest iOS and now I can't sync my music in iTunes form Mac which is running latest  version it starts but stops straight away and gives no info I've tried with wifi off  and on turned everything off and back on but nothing as any one got any idea please ?

    I have the exact same problem! It started this month, I don't know what to do

  • I just upgraded to OS Yosemite, and now I can not open my iPhoto

    I have just recently installed OS Yosemite, and so far everything seems to be working okay except for my iPhoto. I can not open it, at all!

    Did you update it to 9.6?

  • I have just upgraded to OSX Maverick and now my Apple TV has taken over my iTunes videos. I have tried turning off homeshare and iHave gone into system prefs and disabled the remote, but the problem persists. Any ideas.

    After upgrading to OSX Maverick my Apple TV  has taken control of my iTunes videos insisting I have to watch it on my TV. I have tried disabling home sharing on iTunes and on the Apple TV menu, I have also checked the disable Infrared facility in Systems Prefs Security. Even if I put the Apple TV in standby as soon as I hit a key on my iMac, Apple TV comes back on and on my Itunes screen I get the Apple TV logo imprinted on the screen, meaning I can no longer watch it on my MAC, I have run out of ideas. Can anyone help.

    I think you're headed the right direction. There is an AirPlay icon (on mine it is up near the play/pause controls) that I believe is used to set the default desitination for the video to play.
    I'd never seen your issue before, but opened iTunes on a recently-upgraded-to-Mavericks MacBook and it did exactly as you described. While the video was loading, I switched the AirPlay option to the computer instead of ATV and it began playing locally (after a delay as you'd mentioned). I then read this page, which is actually quite old: http://forums.macrumors.com/showthread.php?t=1091073, which lead me to the icon near the play/pause button. It now has Computer selected on it, and defaults to play locally instead of the ATV even after quitting and reopening iTunes. I hope that is helpful.

  • Upgraded to Windows 10 and now I can't see my two HP w1907 monitors or change the screen resolution

    I just upgraded my computer from Windows 7 Professional to Windows 10 Professional. Before the upgrade, I had two monitors. Since the upgrade completed, I no longer have two monitors. I need to figure out how to get two monitors back, as well as how to get the correct drivers for my two HP w1907 monitors installed, so that my system recognizes that I have two monitors. I also need to be able to reset the screen resolution to what I had before (in Windows 7).

    I just upgraded my computer from Windows 7 Professional to Windows 10 Professional. Before the upgrade, I had two monitors. Since the upgrade completed, I no longer have two monitors. I need to figure out how to get two monitors back, as well as how to get the correct drivers for my two HP w1907 monitors installed, so that my system recognizes that I have two monitors. I also need to be able to reset the screen resolution to what I had before (in Windows 7).

  • I have just done a software update and now I can not open my itunes. How can I open itunes?

    Hi, I have a macbook pro os x, version 10.6.8
    While doing a software update, I was asked to quit itunes to download the update. Now I can not open itunes. The icon is still there, but it just bounces up and down when I click on it. What is happening there? And how can I open itunes? Do I need to down load itunes again?

    Settings > Messages > Send & Receive
    Look at the Apple ID and the "YOU CAN BE REACHED..." entries. Make sure none of these are shared with your partner.

  • I have just changed my network provided and now i can't find my 1st gen airport express with airport utilities

    Hi, can anyone help. I've just updated my network with a new hub and now i cant find my 1st gen Airport express with the curreent Aiport utilities.

    From your description, it sounds like the AirPort Express was configured to connect to your "old" router or hub...and, to do that,  the Express remembered the specific ID of that device as part of the connection credentials.
    The Express is likely still looking for the "old" device for which it still has the settings to connect.
    Since you changed to a new hub or router, the Express has no idea how to connect to this new device.
    If this is the case......then the solution will be to reset the Express back to factory default settings....and then configure it again to connect to your "new" hub.

  • I have just upgraded to OSX mavericks and now scanner isn't working - every time I try and open the application it won't open and says that it has had to quit unexpectedly. Any ideas what i can do?

    So, my Epson Scanner V37 - lovely scanner - having just moved my home office to another room, and then upgraded to Mavericks - the scanner software won't open.  I've reloaded the scanner software. I really dont' know what to try - please can somebody suggest something?

    Do you have the lastest driver from Apple? Check here on the Apple Downloads for Printers.

  • I have just upgraded to mountain lion and now can not use iphoto how do I get to my photos?

    iPhoto just has a no entry sign on it after up dating to mountain lion how do I now use iPhoto please?

    Hi Anitra,
    Did you updated from OSX Lion to Mountain Lion? And iPhoto was installed on your Mac? Then iPhoto and the Library must still be on your Mac.
    Go to finder and slect 'Applications'. iPhoto must be in that folder. Open iPhoto. See what happens. Are all your pictures/events displayed?
    If not, please reply and we will try to locate the iPhoto Library.

  • I have just downloaded 7.0.3 and now i can't make any calls or texts. HELP!

    I can't make calls or texts after download the new iphone update 7.0.3
    HELP!  How do i make calls?

    What is preventing u making calls
    Does it say no sim
    You cant find the phone button
    you cant get past activation lock
    you didnt finish the setup

Maybe you are looking for

  • ITEM TYPE

    HI experts can any body explain following In item category there are fields  under BOM. could you pls explain what is the meaning 1.Manual alternative 2. Parameter effectiveness While creating BOM we check create dly group in TAP but not in TAQ, and

  • HT1212 my niece can't remember her passcode, i've followed the directions on here, but it didn't work..  What else can i do?

    Does anyone know how else my niece can get into her iPod, she forgot the pw and the directions online didn't help at all??

  • I can't log in to my EE account

    Been having this problem ever since T-mobile was absorded by EE. I used to have a T-mobile contract and had no problem accessing my account. When it went over to EE, it kept saying it didn't recognise my number, but if I went to register it would say

  • ALV GRID - EVENT HANDLING

    Hi all,    Please let me know how to hanldle  event handling , making a cell in editable mode ,double click and hotspot creation,colorign a single cell,calling a transatcion when clicked on hotspot in a alv grid display program (not using OO   concep

  • Top 5 and Other

    Does anyone know how to show the top 5 totals and group everything else into an "Other" category? select store_name, sum(total_sales) from sales_fact; Store A 600 Store B 500 Store C 400 Store D 300 Store E 200 OTHER 100 I am trying to avoid having t