I have just upgraded to Windows 7 (64 bit). Do I need a specific plug in? Some of my applications won't work in the browser.

I was just upgraded to a Windows 7 (64 bit) laptop. I am trying to get a web-based application (XMLmind) to open in FireFox and am unable to do so. Is there a specific plug-in that I need to make FF compatible with my 64 bit laptop?
Firefox works, but my application does not.

When the videos are in the Movie library, try using the Create IPod and iPhone Version in the Afvanced tab of iTunes.

Similar Messages

  • I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

    I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

    Hi, stig2013. 
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Cheers,
    Jason H. 

  • I have just upgraded from Windows XP to Windows 7 then reinstalled the CS4 I had previously paid for (including the unique code number).  Now I get an error message that says "Licencing has stopped working".

    I have just upgraded from Windows XP to Windows 7 and then reinstalled CS4 (purchased a couple of years back and paid for) then input the unique code number.  Now I get an error msg that says "Licencing has stopped working".  What do I need to do?

    Hello Carole,
    Please try the steps mentioned in the link below:
    Error "Licensing has stopped working" | Windows
    Thanks
    Alisha

  • Have a large library of music on my iphone 5s. I have just upgraded to iphone6. I believe I need to have all my music in my itunes library to transfer it to my new phone - however all I can see in my itunes library is music I have purchased recently

    I have a large library of music on my iphone 5s. I have just upgraded to iphone6. I believe I need to have all my music in my itunes library to transfer it to my new phone - however all I can see in my itunes library is music I have purchased recently. This library of music is from years ago. Ho can I get all my music on my new phone ? Thanks

    See turingtest2's user tip on Recover your iTunes library from your iPod or iOS device.  You should, however, maintain your library on your PC and maintain a regular backup of it.  iPhones are neither designed as nor suitable as data storage devices.

  • TS4009 I have just upgraded my icloud storage and realised I need to cancel how can I do this?

    I have just upgraded my icloud storage thinking I could back up all files ie Word Excel and photos from my PC, I know realise I cannot, how can I cancel my subscription and get my money back?

    I accidentally purchased a $20 icloud storage upgrade for my iphone.  Unable to find any way to cancel this order on my phone or online, I was left with no option but to call Apple.  The first 20 minutes of the conversation with Ayesha in retail has required my phone serial number, my apple id, my apple security questions, my Visa expiry date, my visa number.... with multiple request that I stay on hold.  I asked for an incident number for my call so I would have a record of the call in case the return did not go through.  No incident number was provided by Ayesha. I was then put on hold and transferred to Andrew who then transferred me to Monica. Monica in icloud dept asked me to give all the same information over again because she said there was no record of my security verification. Forty minutes in total for a $20 refund! It would be easier to drive to a store and return a shirt!  The inefficiency cost is enormous to both Apple and myself. Profit margin must be HUGE for Apple to offer such poor service and still stay in business.

  • I have just upgraded to windows 10 and now I can't play movie ft u

    After installing win 10 my USB lfxhcl host controller gone. Can't play movies or listen to music. All was working in 8.1 help.

    Check the tutorial please: https://www.youtube.com/watch?v=jWoIYi1LTPA

  • I have justed upgraded CS2 to CS5. How do I set artboard crop or trim marks for printing?

    I have justed upgraded CS2 to CS5. How do I set artboard crop or trim marks for printing?  It was under the "OBJECTS" menu in CS2, but I can't find it in CS5.

    it actually works the same way but better you don't see it that way but with perhaps more experience you might catch on and say "oh now I see that' all I have to do.
    Multiple artboards, which you did not have in CS 2 , changes the equation.
    When you open a new document you can set up a gangup in the new document dialog then say for a business card then do one business card in the first one.
    Then copy the art and text of that first one and in one command paste that art in all of the artboards with one command, you can then make another artboard that encompasses all the artboards and you now have a gang up say six up you can now print all a once as a gang up or print a range of the artboards or specific artboards.
    As a matter of fact now that you can paste on all artboards with one command AI CS 5 actually has a step and repeat feature that works verticaly and horizontally at the same time. And an improved version is easily had.
    Also since you probably know how many you need of this first artboard then you can simply make one rectangle for for the first artboard and give it a crop area effect and when you do your copy include the rectangle and then paste on all artboards and there you are
    look at the video, see how cool. less complicated not more complicated. And as other users explore this function I bet they come up with even better ideas.
    http://mysite.verizon.net/wzphoto/Artboards.mov
    I am going to make one adjustment here instead of doing a command c to copy the first artboard it would be better to do a command x to cut the first one since the command paste on all artboard does exactly that. So if you do a command c and a command option shift v then you have two rectangles and art and crop marks pasted on top of each other. Probably won't do any harm but might be confusing in the layers panel.

  • I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compresso

    I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!

    Try to disable hardware acceleration in Firefox.
    *Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I have a touchsmart 320 pc and i just upgraded to windows 8 , my touch screen not working

    i have a touchsmart 320 pc and i just upgraded to windows 8 , my touch screen not working

    Just activate the Windows 8 OS via an internet connection, then install all optional, recommended and important drivers from Windows Update, reboot and it'll work.
    [Windows Key] --> Control Panel --> View by: Large icons --> Windows Update --> Scan for updates

  • I have just upgraded to an Iphone 5 and cant get my contacts to sync. My 4s Contacts default account was from my Mac - but I dont seem to ahve this option on my 5? How do I sync them?

    I have just upgraded to an Iphone 5 and cant get my contacts to sync. My 4s Contacts default account was from my Mac - but I dont seem to ahve this option on my 5? How do I sync them?

    The way I do it is I hook to my windows computer, it will pop up iTunes. I click iTunes off. The phone will show as another drive on your computer. Click it open then migrate to the photos folder from the iPhone.
    Then select all, cut then right click on your pictures folder on your computer or make a new folder on your desk top like I do and right click on new folder and select paste.
    Photos will be gone. Just remember to turn off the iPhone sync in your photos folder on the phone or they will come back
    Good Luck

  • I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

    I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

    I had this and fixed it.
    I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
    After lots of hunting, I found the Signature Folder. It's in:
    Yourusername>Library>Mail>V2>MailData>Signatures
    Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
    Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
    Since this was literally a clone of my previous setup to a new machine, here's what I did:
    1. Quit Mail
    2. In Problem machine, go to
    Yourusername>Library>Mail>V2>MailData>Signatures
    3. Move the Signatures folder someplace safe, but out of the MailData folder
    4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
    5. Start Mail on the problem machine
    This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
    Hope this helps

  • HT1846 My iMac 24" is mid 2008 and I have just instaled Win7 Pro 64 bits. All went well execpt...

    Hello everybody,
    My iMac 24" is mid 2008 and I have just instaled Win7 Pro 64 bits. The windows installation went very well, except wen I starte to use the Boot Camp CD for the drivers and then I have this error "Boot Camp x64 is unsupporteded..." So I had to instal everything in the CD one by one and went quite well. The only thing that I can not install is the Boot Camp itself! So I do not have any windows control over the Boot Camp. How can I solve this issue?
    Thanks

    Follow the steps in this guide...
    http://michael.anastasiou.me/index.php?option=com_content&view=article&id=22:qbo ot-camp-x64-is-unsupported-on-this-computer-modelq-solution&catid=7:how-to&lang= en
    Then install the following Bootcamp Updates:
    BootCamp 3.2 Update 64-bit
    BootCamp 3.3 Update
    Hope this helps!
    Message was edited by: vea1083

  • I just upgraded to Windows 7. Downloaded I-Tunes but its telling me I need to authorize my computer to download to my I-Pod. How do I do this?

    I just upgraded to Windows 7 and downloaded I-Tunes. In order for me to put all my songs on my I-Pod I am being told that I have to authorize my computer. How do I do this?

    Authorization
    iTunes Store- Authorize or deauthorize your Mac or PC.
    In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.

  • I have just upgraded to new firefox version 4, but I want the old homepage of version 3.6. Can it be done? Thanks.

    I have just upgraded to new firefox version 4, but I want the old homepage of version 3.6. Can it be done? Thanks

    Don't know if there is an option make the download window stay up, but you can bring it back with Ctrl+J then right-click on the download to open the folder it was downloaded to.
    * keyboard shortcuts -- http://dmcritchie.mvps.org/firefox/keyboard.htm
    Where files get downloaded to is in your '''about:config''' settings.
    * [http://kb.mozillazine.org/About:config About:config - MozillaZine Knowledge Base]
    * [http://kb.mozillazine.org/About:config_entries About:config entries - MozillaZine Knowledge Base]
    check out variables beginning browser.download.

  • Adding deselected music on i-tunes en masse as i have just upgraded to 160g

    I have just upgraded from an 80gb to a 160gb ipod. On my itunes i have 106gb of music - in order to get music onto my 80gb ipod I "unticked" songs - now that I have a 160gb i want to add the 26gb onto this - how best do i do this all at once as opposed to "ticking" all song individually?
    thanks
    Message was edited by: Nev Swift

    You can check or uncheck all the songs at once. To select or deselect all the songs in your library (add or remove all checkboxes), Control-click the checkbox next to a song. You can toggle the check marks on and off: iTunes for Windows Keyboard Shortcuts

Maybe you are looking for