I have k9n sli platnm having video play back issues

When I hooked up with Comcast from Verizon I switched modems from DSL to cable modem all using my lan port for the internet and since then some of my videos won’t play. Microsoft seems to think that it has something to do with open h.323 a couple of days ago I was messing around with some drivers for the video or display I can’t remember. It asked me if I wanted to keep the display driver so I did but when I restarted the computer a message about the pci bridge something missing, and the internet wasn’t working but I went to play the videos that wern't playing and all of them play. I did a system restore and got the internet back. But when I went back to look at those drivers again I couldn’t remember so I updated everything and every driver I could think of but still no dice.

Re-write it normally please. I get a headache reading posts that are in all caps. Also, all caps violates the forum rules. Please list all your components along with your re-write.
>>Please read and comply with the Forum Rules.<<

Similar Messages

Is it possible to change brightness in video play back?

Is it possible to change brightness in video play back, without having to go to settings?
If not, then who agrees this should be possible?
I’m sure most iphone users have the stock brightness setting set to low to save battery power, but it’s very irritating when you go to watch a video in bright lighting conditions and in order to see it properly you have to go back out and change it.
I am not computer programmer, but I’m sure it would be possible to have a slider (just like the volume) and could be introduced in a update.
I think it would improve the overall iphone experience just that little bit more.
What do you think?

All Help > System Info does is to report your system specifications so you can copy and paste them in the forums for troubleshooting purposes.
You can choose what to highlight and copy, but it does not change anything in your system like editing a configuration file would.

Captured video plays back fast (sped up) in Final Cut Express 4

I had a Panasonic mini-dv digital camera that was stolen and it worked great with FCE. I purchased a JVC GR-D870 (mini-dv) as a replacement and now in FCE when I capture video it plays back fast in the Viewer and if I open the .mov file in Quicktime. Note that the video plays back at the correct speed when played from the camera, and when the video is being captured. I've tried changing my Easy Setup, but nothing has helped much. I'm currently using the DV-NTSC FireWire Basic setting, though it doesn't matter which one I chose. I did try using the 25.00 fps DV-PAL setting and interestingly it will capture for about 2 seconds and then crash, but the 2 second clip I'm left with seems to playback at the normal speed. This is an NTSC camera so not sure how to get the video that I capture to play at the correct speed (frame rate?). Any help would be most appreciated.
Message was edited by: jbrumleve

Never heard this one before!
I have no idea why it is playing back fast, but if you have an NTSC camera you must use an NTSC Easy Setup.
When FCE behaves strangely the first thing to try is to delete the preferences as described here:-
http://www.fcpbook.com/Misc1.html

Why does my Flash Player keep freezing during video play back?

I have the very lastest version for Windows 7 64bit OS and it keeps freezing during video play back. The previous versions did not do this. I have to keep the cursor moving inside the video window to prevent the player freezing. I have deslected HARDWARE ACCELERATION and it does not help. Why is this happening and how do I correct this situation?

Right click ANY Flash content and choose "Setings".
Click the folder icon (center tab) and increase the storage to at least 10Mb.

Video play back choppy

The video play back is very choppy on itunes. I have read two trouble shooting topics about video play back but I don't understand them. I have vista. Do any of you have any ideas? Is the any phone or online support for itunes? I can't find any links tech support.

Hello @GSW1964,
I understand that you are getting choppy video playback on your HP Pavilion Slimline s7410n Desktop PC running Windows 7. What type of video are we talking about here live streaming? What steps have you taken? Have you tried turning off hardware acceleration?
Please re-post with as much information as possible and I will be happy to assist you. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Facebook videos play back without sound

When I click on a video within Facebook, the video plays back without audio.
I have a 16gb iPad with retina display.
This happens on all videos within
Facebook and continues despite several updates to Facebook.
I am running iOS 7.0.4
Help please

Hello acarrejo,
It sounds like the Facebook app on your iPad is not playing audio. I recommend following the steps in the article below for an issue like this (you can skip step 3 since it is not related to this issue):
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thank you for using Apple Support Communities.
Best,
Sheila M.

Webcam video plays back super fast speed

hi, does anyone know about this: when i record video from my creative Live! Cam Video IM Pro, the play back is like twice the speed of real life. like a video speeded up. it was working fine on my previous computer, which was windos xp, and i upgraded to a newer computer with windows vista 64 bit, and now the video play back is too fast. i also tried viewing the video on other viewers like windows media and VLC, still too fast.

Hi David,
I think we may be able to say more if you can tell us more about the rest of your code. What sort of structures are you using, and where are you dropping your AVI Capture code in? Is the video sped up on your front panel or when you play the resulting file?
You should post the larger piece of code if possible.
Cheers,
Andrew C.
Applications Engineer
National Instruments

Video play back in FCP X is choppy, does anyone know how to fix this??

video play back in FCP X is choppy, does anyone know how to fix this??

So I just tested it and the badge icon does appear to update, but it takes a minute or two. Does anyone know why it takes so long? All of my other app badges seem to update almost immediately.

Why my Canon mvi video play back is fuzzy?

Why my Canon mvi video play back is fuzzy?

What OS are your other machines using? Trying to find out if this is an OS difference problem.

Having trouble playing back GO PRO HD Hero 2 .mp4 video

Im currently running OS X 10.5.8, 2.6Ghz Core 2 Duo, 4GB Ram, 500GB HD 7200rpm.
I just picked up the GO PRO HD Hero 2 Camera and my computer can not play back the 720 or 1080 type videos without having major lag/skipping issues in either QT or FCP. I have tried everything I can think of to speed uo my computer but can't seem to solve the issue. Has anyone else experienced this or have any ideas? It seems like my computer should'nt have any issues playing back these video files.
Thanks so much!!!
Austin

Just needed to reformat via MPEG streamclip to .MOV and everything works great!

K9N SLI Platinum reboots while playing games

Hello,
System config
Athlon 64 3800+ x2
K9N SLI Platinum (Bios version 1.1)
2 * 1024 ocz 6400 gold memory
80 gig sata 1 drive
nec dual layer burner
Xfx 7600 gt xxx
floppy
PSU Coolmax AP-450 (CX-400)
The system is stable when I browse email and such, but as soon as I play games I'm getting reboots. Blue screen of death a couple times. I bought a couple more fans for my case (waiting to see if it makes a difference when it arrives). It may be getting to hot. I have been reading and perhaps the PSU is not good enough or compatible. I haven't checked the memory yet, But i would think that it would reboot consistantly not just in games if that were a problem. Does anyone have a solution for me?
Thanks,
LTBob

Quote from: eddie_g on 19-July-06, 19:06:28
I had the same problems as you have.
The fix I did was, downloaded the drivers for AMD dual core processors from the AMD website.
Make sure you have your RAM set to 2.1V.
It's nothing to do with the PSU.
"It's nothing to do with the PSU."
cant agree, there is alot of issues with the same symptoms. it may crap or overload PSU also.

CS4: Why do I have Lag on only 1920 1080 video play back??

Hi,
I currently record with a Sanyo Xacti HD2000, at 1920x1080 30fps SHQ resolution. Whenever I play the clips on the camera or Nero Essential 8 on my computer there is no lag problems. However the moment I upload a clip onto Premiere Pro CS4 with this resolution I have severe lag on the play back from the Premiere video screen. I've recorded on 1280x 720 and 640x480 on the camera too and the play back is completley fine with no lag what so ever, just the moment Full HD clips are imported do I get any lag. I don't think it's because my computer can't handle it either as it has in it Core 2 Duo processor, 3GB of Ram and an Overclocked 1GB Geforce 8600 GTS Graphics Card. The only thing I'm not sure about is what Presets I should be using for my footage as this might be the problem.
If ANYONE can help I'd seriously appreciate it, you can email me a [email protected] If you want to further questions about anything you may feel may help you guys helping me or just to communicate to me faster;
Thank you sooo much!!!

Hi,
I dont think the gpu of your graphics overclocked card is used at all in the cs4 environment...thats more for gaming stuff.
so you can rule that out as a "plus"
The 3 gig ram is kinda anemic...low power...every gig helps...so 4 would be better...think about it...the OS alone uses a lot of ram..
the power requirements that adobe says you need to run the program is on the low end of requirements...and you are maxing things out playing with real high HD stuff.
everything else is a question of how you set up your hard drives and raid array and so on to deal with editing in general ( there are hardware threads about how to set that up best....scratch disk and so on...cache...)
plus you might have a red bar above your timeline indicating it should be "rendered" for smoother playback...and that has an effect too.

On my iPhone 4s the video play back , the audio is very low . All other audio is good on phone even older video plays nice and loud . I have no idea what is wrong?

On my iPhone 4s taking video then playing back ,the audio is so low you can barely hear it . I played older videos and the audio works perfect . All other audio works perfect on the phone too. I have no idea what is going on ?

Hey!
I have tried holding down the home and power button countless of times. It doesnt respond at all. Plug my phone to a charger and hold down the power button and my phone switched on. But it said Activation Required and said connect to Itunes. As e screen remains on the connect to Itunes screen, I disconnect the charger from my phone and my phone went dead instantly. My battery is full btw. Tried connecting to Itunes through my Macbook Pro but iTunes doesnt detect my device and the apple logo flashes for about a few seconds on my phone and then disappear and then came back on again. My Iphone has been connected to my laptop for about 30 mins and the apple logo has been coming on and off for 30 minutes now and Itunes has not detect my device yet.
SIGHHH.

When I chose the GPU Acceleration on my general settings I only get audio and not video play back

It has been extremely frustrating for me because my computer can render files fast just couldn't read the graphics card I had so I had to unlock it. I am hoping someone on here has done something similar to help me get this to work because the only thing that I am having trouble with as far as when it is on software only is on play back. I kept dropping several frames and it was really frustrating me. I think I may have found why I am having this problem and hope someone on here can help me out.
15. Now just add the name of the card between the “Renderer string:” and the forward slash “/” to the cuda_supported_cards.txt file.
This was on of the steps that I did not understand and could be the reason why it is not working properly because I did not know how to do this.
Like I said it is letting me switch to the GPU Acceleration mode just not letting me see any video on anything in cs6.
This is the link to where I learned how to get premiere cs6 to read my graphics card http://www.studio1productions.com/Articles/PremiereCS5-2.htm
I have a GeForce GT 525M graphics card and according to that site I can get premiere to read my graphics card to help me playback without dropping frames.
I also installed the latest driver so that can not be the issue as of now. If you know the answer please help this is very frustrating.
Thanks!

See http://www.nvidia.com/Download/index.aspx

Problems with video play back on HP webcam HD 2300

Hi,
I just boaught and installed a new HP webcam HD 2300. It works fine but when I play back a video I have recorded (of myself talking into the webcam), the video doesn't keep pace with my voice, so the 2 don't play at the same speed. Any ideas as to how I can correct this please?
Thanks

HI Macrogend55.
Thank you for your inquiry.
I understand you are having an issue with your new web cam.
I am sending you a link to a Microsoft document on "updating a driver for hardware that isn't working properly" click here.
Here is a link to the "User Guide"click here
Here is the link to the HP software and driver downloads click here.
I hope this helps
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

I have k9n sli platnm having video play back issues

Similar Messages

Maybe you are looking for