I have Keynote 6.2 and when my Mac Pro is hooked to a projector I cannot get the presenter notes to show on the computer screen and not on the projected screen. Any ideas?

I have Keynote 6.2 and when my MacPro is hooked to a projector with a slide presentation I cannot see my presentation notes on the computer screen and not on the projected screen. Any ideas?

Somethings obviously gone wrong with your installation of Keynote.
Try this repair for Keynote 6.2,  ensure you complete all the tasks and in the order shown:
1  delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2  empty the trash:  Finder > Empty Trash
3  Shut down your Mac, wait 30 seconds, then hold down the Shift key while pressing the power button
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4   Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5  when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click  repair disc permissions
6  when complete, restart the Mac normally, Apple menu > Restart
7  install Keynote from the Mac App Store
let us know if this helped

Similar Messages

  • HT203167 got a new mac pro, went to sync in 20 songs from i phone, only one got there. my phone is saying all 20 are on i cloud, any ideas?

    I recently had my Dell crash, I had hundreds of songs lost, but did have roughly 30 songs that I had bought on I Tunes on my I Phone.  I bought a new Mac Book Pro, went to sync in my I Phone to the MacBook Pro to get those 30 songs.  Only one song went through.  Any idea of how to get the rest?  I know that when I had my I Phone, I repeadately forgot my I Tunes password and had to make new ones, don't know what my username was, I do now.  Also, I bought the majority of those songs with a different I Phone than the one I currently have.  Any advice would be appreciated, the last four on my credit card is 8514

    How exactly was the music transferred to the new computer?
    The correct way is to copy the ENTIRE iTunes folder from the old computer to the new computer.  If it was transferred properly there are no issues with syncing to the iOS device.

  • I have a magnifying glass shown when my Mac Pro starts, how can I getb rid of thsi?

    After my Mac Pro with Apple Lion 10.74 is up and running, a rectngular magnifying glass appeqrs, I want to close this magnifying glas, how can I do it?

    Head to your Apple Menu > System Preferences > Universal Access > Seeing > Zoom options or thereabouts.
    You must have triggered a shortcut key or something.

  • How do I lift a picture in a document to print it without printing the entire document, and when I ask it to print at 400%, how do I get it to tell me how many pages there are and what is on them

    I have a pix of a quilt in a document. I would like to print the page of the document at 400% to enable me to see the quilt better. When I go to effects and put in my percent, it prints the entire document and will not allow me to move to other pages. It says its p1 of 1. I am taking a class for making this quilt. I need this pix for the class.

    http://www.kimberlyeinmo.com/classes/
    This the site. The tulip quilt is what I would like to enlarge and print without the whole document.

  • HT4060 Cannot get my new I- pad to charge it has a smaller connection than my last one any ideas

    Can anyone help my new iPad will not charge it has a smaller connection than my old one?

    Can anyone help my new iPad will not charge it has a smaller connection than my old one?

  • After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?

    After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window elements to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?

    Ok thanks Linxup I would recommend posting in the respective forums for each of those software titles as opposed to the Creative Cloud Download & Install forum.  The relevant forums are as follows:
    InDesign - InDesign
    Illustrator - Illustrator

  • When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?

    Hi all,
    I need help with my iphone4s.
    When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?
    What seems to be the problem here?
    thanks and regards
    Wan

    Wanlucg wrote:
    When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats.
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Hi, I have a MacBook Pro. It is plugged in and charging but will not switch on. I try pushing ctrl, shift, alt and power together then release and press power again. The laptop goes to a white screen but switches off straight away. Any ideas?

    Hi, I have a MacBook Pro. It is plugged in and charging but will not switch on. I try pushing ctrl, shift, alt and power together then release and press power again. The laptop goes to a white screen but switches off straight away. Any ideas?

    P.s. it is now going to apple logo on white screen then switches off

  • I have an iMac with a black / blank screen on startup. Been to Apple Genius. They have no idea and wish to replace logic board, screen ,cable - over $1300 cost - ouch. Any ideas

    I have an iMac with a black / blank screen on startup. Been to Apple Genius (Aus, Bondi). They have no idea and wish to replace logic board, screen ,cable - over $1300 cost - ouch. Any ideas ? Thanks

    Buy a new iMac, the base 21.5" models are only $1,199.00
    Apple iMac Desktop Computer - Buy iMac, the Ultimate All-in-One - Apple Store (U.S.)

  • After ios7 upgrade to my 4s, touch interface keeps freezing on me and the screen rotation feature us completely dead. Any ideas?

    After ios7 upgrade to my 4s, touch interface keeps freezing on me and the screen rotation feature us completely dead. Any ideas?

    You can try resetting your iPhone by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • When installing itunes 10 uding windows xp I get the following error: "There is a problem with this Windows Installerpackage. A program run as part of the setup did not finish as expected. Contact your sipport personnel or package vendor." - any ideas?

    When downloading itunes 10 in windows xp, I get the following error "There is a problem with this Windoes Installer package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or package vendor." - any ideas on how to proceed?

    using MSICUU2.exe didn't help me.  But,  the new replacement app did:
      http://support.microsoft.com/mats/Program_Install_and_Uninstall
    I fixed my problem like this:
    Here's the deal - 
    1.  can you install itunes via the APPLE SOFTWARE updater?
    I couldn't  so I downloaded ITUNES and tried to install it that way.   Hence  I got the same error hang as you.  Nothing worked,  (Multiple attempts at uninstall reinstall,  stopping of Services,  Reg cleaners  etc..)
    2.  If answer is NO to #1 you must fixe the APPLE SOFTWARE UPDATE Program. 
    OK  so I couldn't find a Download for this.   But:  if you have WINRAR,  open the ITUNES.EXE and extract the APPLESOFTWAREUPDATE.MSI file.  Execute the APPLESOFTWAREUPDATE.MSI separately.   And you will not be able to install it and have a similar issue as per your Itunes install.   This of course leads you to believe that the Itunes.exe  install is also installing all of these components including the applesoftwareupdate silently.   It must BOMB at that portion of the install and you are done. 
    3.  Your goal now is to get the applesoftwareupdate installed.   How do you do this.  Well -  here is what I did.
      a.  downloaded and RUN a PC  Installer FIX it tool from Microsoft.  This is a replacement for the older MSI fixer they used to use.
      http://support.microsoft.com/mats/Program_Install_and_Uninstall
    b. It will list programs to attempt to fix.
      choose  AppleSoftwareUpdate.msi
    c. Once it is done,  then reinstall apple program updater using
    AppleSoftwareUpdate.msi
    Finally it should install since the Microsoft tool appraently fixed corrupted installation files in your registry for this application.
    (Please note:  that I also disabled any apple related services such as BONJOUR or IPOD DEvice RUN:  services.msc to get there -  although this man not be necesarry.)
    Hence Launch this APPLE UPDATE SOFTWARE (Click the ICON in your Start menu)  it should list ITUNES
    select ITUNES from here and it will update.
    KEY HERE is to ONLY UPDATE APPLE Stuff via the APPLE SOFTWARE UPDATE program.  If that program is not working fix it.  Then Bingo.
    I am sorry to see folks having this problem for weeks.  
    APPLE,   Spread the word.  PC's can get corruption in the registry on your product should the update be stopped or computer shut off during an update.  etc...   Please improve your software updater program to check for invalid registry upon launching the app.  This will prevent people thinking it is an APPLE issue.  It appears to be a problem on your PC's registry settings for the APPLE Software update.
    Bruno Ricci

  • T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?

    T43 – Model 1871-FU1: Will not boot with blank screen.  Only Fan is running.  Any ideas?
    Solved!
    Go to Solution.

    What lead_org is referring to is commonly known as "re-balling" which involves unsoldering the Southbridge chip from the planar, replacing all (6-700) solder balls with new ones and then re-attaching it under heat/pressure.
    This is the place that you need:
    http://www.theboardroom.info/index.html
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • I cant update my software. It downloads updates , then says, 'an error has occurred and updates have not been installed'. I am now behind 6 months on updates. Any idea how to fix this?

    I cant update my software. It downloads updates , then says, 'an error has occurred and updates have not been installed'. I am now behind 6 months on updates. Any idea how to fix this?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update. Post the log text, please, not a screenshot.
    If there are runs of runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.

  • When I tap safari, I get a completely white page.  Pages take forever to load, even with strong wifi.  Any ideas?

    When I tap safari, I get a completely white page.  Pages take forever to load, even with strong wifi.  Any ideas?

    you may have a strong wifi signal but what kind of speed are you getting,
    are you able to connect to wifi and see if it goes any faster then?
    it might just be that the cellular data connection is slow

  • EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC.  It used to show up on left side and I would slide podcasts right over to it for years,

    EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC.  It used to show up on left side and I would slide podcasts right over to it for years,  I have installed 3x with removing old install.  I also can hear a constant throbbing sound in spkrs. when Itunes turned on, pls advise.

    Hi Becki ..
    You need to "authorize" the Mac.
    Launch iTunes on the Mac then from the iTunes menu bar top of your screen click Store > Authorize This Computer.
    Now, using the same Apple ID as you used to purchased iTunes media originally, you should be able to sync all your content.
    More details here >  iOS: Syncing with iTunes

Maybe you are looking for

  • Is there a user exit to modify PO line item level..

    Dear Friends, Is there a user exit to modify PO line item level.. Ravi

  • Limit on connections?

         From a class that requires transactions, I invoke a routine in a class that supports transactions. That second routine, in turn, opens up a database connection, invokes a stored procedure (which, by the way, is completely empty -- it just has a

  • WD Table onleadselect method - button diability

    Hi all, In benefits application once the user selects a medical or dental plan, he will be taken to plans within it by individual vendors. Once the user selects a plan like HMO, he should select the dependent coverage too, so that he selects the depe

  • Color LaserJet CP1518ni blue print with red shadows, help !

    Blue text prints with a red shadow on the right side of the page only.  There is no magenta in the blue.  All other colors print fine.  I have tried a new magenta cartridge and it was the same.  All cartridges are OEM.  I updated the firmware and it

  • Sound Problem with Compaq Presario

    Hi, I am using a Compaq Presario SR 1630IL desktop, Prod # EG224AA#ACJ, S/N INI54709VG. In my system Windows XP and Ubuntu 9.4 are installed with Ubuntu as the default OS. The PC is using Realtek ALC 880 sound card. The linux sound module is snd-hda-